{"title":"M1.4 Screws","description":"\u003cp\u003eM1.4 screws have a 1.4 mm thread and a fine 0.3 mm pitch. They show up in places with very little material to thread into: laptop power-button and fingerprint-reader brackets, harmonica reed plates, and similar small assemblies. Our M1.4 screws are 2 mm long, sold as singles and in packs.\u003c\/p\u003e\u003cp\u003eTo confirm M1.4, measure the thread with calipers (about 1.3-1.4 mm) and compare it with any M1.6 screws nearby, which look almost the same. Measure an old screw with calipers: the thread diameter gives the M number and the length gives the second figure. On a countersunk head the length is measured overall, head included; on a flat-bottomed head it is measured from under the head to the tip. Drive them by hand with a #000 precision bit and stop as soon as the head seats; at this size it is easy to strip the thread in a plastic boss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated sizes:\u003c\/strong\u003e \u003ca href=\"\/collections\/m1-2-screws\"\u003eM1.2 screws\u003c\/a\u003e · \u003ca href=\"\/collections\/m1-6-screws\"\u003eM1.6 screws\u003c\/a\u003e · \u003ca href=\"\/collections\/micro-electronics-screws\"\u003eMicro electronics screws\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"m1-4-x-2mm-micro-screws-for-harmonica-reed-plate-repair-10-pack","title":"M1.4 x 2mm Micro Screws for Harmonica Reed Plate Repair 10-Pack","description":"\u003ch2\u003eM1.4 x 2mm Micro Screws for Harmonica Reed Plate Repair | 10-Pack\u003c\/h2\u003e\u003cp\u003eM1.4 x 2mm micro screws for harmonica reed plate maintenance. A rare size for music technicians and DIY players.\u003c\/p\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eHarmonica reed plates use extremely small metric screws nearly impossible to find locally. Wrong size damages the reed plate affecting tone.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStripped threads and damaged housings\u003c\/li\u003e\n\u003cli\u003eLoose components causing poor performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHarmonica reed plate repair\u003c\/li\u003e\n\u003cli\u003eHohner Lee Oskar Seydel harmonica hardware\u003c\/li\u003e\n\u003cli\u003eMusical instrument micro fastener replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M1.4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Phillips Flat Head Low Profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Style:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard:\u003c\/strong\u003e Metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10 Screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e M1.4 screws are micro-sized. Not compatible with M1.2 or M1.6. Verify before ordering.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"Default Title","offer_id":43433437298762,"sku":"M1.4X2-PFH-CS-BLK-10PK-HARM","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/s-l1600_34e3704c-7308-481e-8136-3fd1266aec63.webp?v=1774301963"},{"product_id":"m1-4-x-2mm-screws-for-dell-xps-14-9440-power-button-10-pack-black","title":"M1.4 x 2mm Screws for Dell XPS 14 9440 Power Button – 10-Pack Black","description":"\u003cp\u003eReplacement \u003cstrong\u003eM1.4 x 2mm\u003c\/strong\u003e Phillips micro screws for the \u003cstrong\u003eDell XPS 14 9440\u003c\/strong\u003e power button. Sold as a 10-pack so you have spares for future repairs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e M1.4 thread × 2mm length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e Low-profile flat head — sits flush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 10 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck the size before you order\u003c\/h3\u003e\u003cp\u003eM1.4 x 2mm means a 1.4mm metric thread, 2mm long. This listing is for the screw used at: \u003cstrong\u003eDell XPS 14 9440 Power Button –\u003c\/strong\u003e. Laptops use several lengths of the same thread in different places, so match the location, not just the model. If you still have an original screw from the same spot, compare it, or measure the thread and length with calipers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA screw that is too long can press on the board, cable or battery underneath.\u003c\/li\u003e\n\u003cli\u003eA different thread size (for example M2 vs M2.5) will not hold and can strip the threaded insert.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMore help: \u003ca href=\"\/pages\/screw-size-guide\"\u003eHow to measure a laptop screw\u003c\/a\u003e · \u003ca href=\"\/pages\/laptop-screws-by-model\"\u003eLaptop screws by model\u003c\/a\u003e · \u003ca href=\"\/pages\/dell-xps-14-9440-screws\"\u003eDell XPS 14 9440 screw guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"Default Title","offer_id":44193917042762,"sku":"M14X2-PFH-CS-BLK-10PK-XPS9440PWR","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/s-l1600_34e3704c-7308-481e-8136-3fd1266aec63.webp?v=1774301963"},{"product_id":"m1-4-x-2mm-screws-for-dell-xps-13-9340-power-button-fingerprint-10-pack-black","title":"M1.4 x 2mm Screws for Dell XPS 13 9340 Power Button Fingerprint 10-Pack Black","description":"\u003cp\u003eReplacement \u003cstrong\u003eM1.4 x 2mm\u003c\/strong\u003e Phillips micro screws for the \u003cstrong\u003eDell XPS 13 9340\u003c\/strong\u003e power button with fingerprint reader. Sold as a 10-pack so you have spares for future repairs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e M1.4 thread × 2mm length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e Low-profile flat head — sits flush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 10 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck the size before you order\u003c\/h3\u003e\u003cp\u003eM1.4 x 2mm means a 1.4mm metric thread, 2mm long. This listing is for the screw used at: \u003cstrong\u003eDell XPS 13 9340 Power Button Fingerprint\u003c\/strong\u003e. Laptops use several lengths of the same thread in different places, so match the location, not just the model. If you still have an original screw from the same spot, compare it, or measure the thread and length with calipers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA screw that is too long can press on the board, cable or battery underneath.\u003c\/li\u003e\n\u003cli\u003eA different thread size (for example M2 vs M2.5) will not hold and can strip the threaded insert.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMore help: \u003ca href=\"\/pages\/screw-size-guide\"\u003eHow to measure a laptop screw\u003c\/a\u003e · \u003ca href=\"\/pages\/laptop-screws-by-model\"\u003eLaptop screws by model\u003c\/a\u003e · \u003ca href=\"\/pages\/dell-xps-13-9340-screws\"\u003eDell XPS 13 9340 screw guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"Default Title","offer_id":44193918091338,"sku":"M14X2-PFH-CS-BLK-10PK-9340PWR","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/s-l1600_34e3704c-7308-481e-8136-3fd1266aec63.webp?v=1774301963"},{"product_id":"m1-4-x-3mm-black-wafer-head-phillips-machine-screws-2-5mm-thin-flat-head-for-phone-tablet-micro-electronics","title":"M1.4 x 3mm Black Wafer Head Phillips Machine Screws (2.5mm Thin Flat Head) for Phone, Tablet \u0026 Micro Electronics","description":"\u003ch2\u003eM1.4 x 3mm Black Wafer Head Phillips Machine Screws (2.5mm thin flat head)\u003c\/h2\u003e\u003cp\u003eMetric M1.4 x 0.3mm machine screws, 3mm long, with a \u003cstrong\u003ewafer head\u003c\/strong\u003e: a wide, thin, flat-topped head (2.5mm across) that sits on the surface instead of sinking into a countersink, like the low-profile screws used inside laptops and electronics. Black carbon steel, Phillips drive. Packs of 10 \/ 50 \/ 100.\u003c\/p\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eMatch three things: the thread (M1.4), the length and the head. A countersunk (cone) screw in a flat seat sits loose; a pan head can be too tall for a tight cover. A wafer head spreads the load over a wide, thin bearing surface and keeps the profile low.\u003c\/p\u003e\u003ch3\u003eHow to Measure\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M1.4 measures about 1.3-1.4mm across the threads; pitch 0.3mm (metric coarse).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e for a wafer (non-countersunk) head, measure from \u003cem\u003eunder the head\u003c\/em\u003e to the tip: 3mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e flat, thin and 2.5mm across; flat underneath.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eTypical Uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmartphone internal brackets, board shields and sub-boards (M1.4 is the common Android phone thread)\u003c\/li\u003e\n\u003cli\u003eSmartwatches, compact cameras and small handheld electronics\u003c\/li\u003e\n\u003cli\u003eMicro electronics, PCB and model building\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo specific device model is claimed: compare with the screw you removed (thread, length and head) before ordering.\u003c\/p\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10\/50\/100 x M1.4 x 3mm black wafer head Phillips machine screws (choose the pack)\u003c\/li\u003e\n\u003cli\u003eBrand new, bagged and labelled\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M1.4 x 0.3mm (metric coarse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3mm (under the head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Wafer head (flat, low profile, not countersunk)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 2.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish \/ Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Metric\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e please verify the thread size, length and head before ordering. Metric M1.4 screws do not fit imperial (#-32 \/ UNC) holes, and other M sizes are not interchangeable.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"10-Pack","offer_id":67716531355722,"sku":"M1.4X3-WAF-BLK-10PK","price":4.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":67716531388490,"sku":"M1.4X3-WAF-BLK-50PK","price":6.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":67716531421258,"sku":"M1.4X3-WAF-BLK-100PK","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/ebour-m14x3-wafer-black.jpg?v=1792202898"},{"product_id":"m1-4-x-3-5mm-black-wafer-head-phillips-machine-screws-2-5mm-thin-flat-head-for-phone-tablet-micro-electronics","title":"M1.4 x 3.5mm Black Wafer Head Phillips Machine Screws (2.5mm Thin Flat Head) for Phone, Tablet \u0026 Micro Electronics","description":"\u003ch2\u003eM1.4 x 3.5mm Black Wafer Head Phillips Machine Screws (2.5mm thin flat head)\u003c\/h2\u003e\u003cp\u003eMetric M1.4 x 0.3mm machine screws, 3.5mm long, with a \u003cstrong\u003ewafer head\u003c\/strong\u003e: a wide, thin, flat-topped head (2.5mm across) that sits on the surface instead of sinking into a countersink, like the low-profile screws used inside laptops and electronics. Black carbon steel, Phillips drive. Packs of 10 \/ 50 \/ 100.\u003c\/p\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eMatch three things: the thread (M1.4), the length and the head. A countersunk (cone) screw in a flat seat sits loose; a pan head can be too tall for a tight cover. A wafer head spreads the load over a wide, thin bearing surface and keeps the profile low.\u003c\/p\u003e\u003ch3\u003eHow to Measure\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M1.4 measures about 1.3-1.4mm across the threads; pitch 0.3mm (metric coarse).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e for a wafer (non-countersunk) head, measure from \u003cem\u003eunder the head\u003c\/em\u003e to the tip: 3.5mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e flat, thin and 2.5mm across; flat underneath.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eTypical Uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmartphone internal brackets, board shields and sub-boards (M1.4 is the common Android phone thread)\u003c\/li\u003e\n\u003cli\u003eSmartwatches, compact cameras and small handheld electronics\u003c\/li\u003e\n\u003cli\u003eMicro electronics, PCB and model building\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo specific device model is claimed: compare with the screw you removed (thread, length and head) before ordering.\u003c\/p\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10\/50\/100 x M1.4 x 3.5mm black wafer head Phillips machine screws (choose the pack)\u003c\/li\u003e\n\u003cli\u003eBrand new, bagged and labelled\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M1.4 x 0.3mm (metric coarse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3.5mm (under the head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Wafer head (flat, low profile, not countersunk)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 2.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish \/ Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Metric\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e please verify the thread size, length and head before ordering. Metric M1.4 screws do not fit imperial (#-32 \/ UNC) holes, and other M sizes are not interchangeable.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"10-Pack","offer_id":67716531945546,"sku":"M1.4X3.5-WAF-BLK-10PK","price":4.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":67716531978314,"sku":"M1.4X3.5-WAF-BLK-50PK","price":6.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":67716532011082,"sku":"M1.4X3.5-WAF-BLK-100PK","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/ebour-m14x35-wafer-black.jpg?v=1792202904"},{"product_id":"m1-4-x-3-5mm-black-wafer-head-internal-screws-for-samsung-galaxy-s21-s20-a54-a53-note-10-20-pack-replacement","title":"M1.4 x 3.5mm Black Wafer Head Internal Screws for Samsung Galaxy S21, S20, A54, A53, Note 10 – 20-Pack Replacement","description":"\u003ch2\u003eM1.4 x 3.5mm Black Wafer Head Internal Screws for Samsung Galaxy S21, S20, A54, A53, Note 10 – 20-Pack Replacement\u003c\/h2\u003e\u003cp\u003e20 replacement M1.4 x 3.5mm black wafer head Phillips screws for Samsung Galaxy S20 \/ S21, S9 \/ S10, A50-A55 and Note 9 \/ Note 10 internal screws. Compatible size: a parts reseller sells Samsung service parts named \"Screw M1.4 L3.5\" (6001-003227 \/ 6001-003373) for these Galaxy models, and iFixit's S21 guides show 3.5 mm Phillips screws. The documents do not give head size or colour.\u003c\/p\u003e\u003ch3\u003eFits these models\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDevice\u003c\/th\u003e\n\u003cth\u003eWhere it goes\u003c\/th\u003e\n\u003cth\u003eQty per unit\u003c\/th\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSamsung Galaxy A35, A53, A55, S21, S21+, S21 Ultra, S21 FE, M23, M54, S23 FE, S24 FE\u003c\/td\u003e\n\u003ctd\u003einternal screw\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/2repair.parts\/product\/samsung-screw-m1-4-l3-5-50921\"\u003e2repair.parts listing of Samsung service part (reseller)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSamsung Galaxy A15, A16, A23, A34, A54, S20, S20+, S20 Ultra, Note 10, Note 10+, S10 Lite, S10 5G, XCover 6 Pro \/ 7\u003c\/td\u003e\n\u003ctd\u003einternal screw\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/2repair.parts\/product\/samsung-screw-m1-4-l3-5-50917\"\u003e2repair.parts listing of Samsung service part (reseller)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSamsung Galaxy S9, S9+, S10e, S10, S10+, Note 9, A50, A51, A70, S20 FE, Fold\u003c\/td\u003e\n\u003ctd\u003einternal screw\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/2repair.parts\/product\/samsung-screw-m1-4-l3-5-6976\"\u003e2repair.parts listing of Samsung service part (reseller)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSamsung Galaxy S24\u003c\/td\u003e\n\u003ctd\u003emedium frame \/ camera module screw (M1.4 x 3.5, 2.5 mm head)\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/teamplush.by\/en\/product\/samsung-galaxy-s24\/\"\u003eteamplush.by S24 parts listing, via screwfitmentdatabase.com (confirmed record)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSamsung Galaxy S21\u003c\/td\u003e\n\u003ctd\u003edaughterboard and 5G antenna brackets (3.5 mm Phillips, length only)\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/www.ifixit.com\/Guide\/Samsung+Galaxy+S21+Daughterboard+Replacement\/148688\"\u003eiFixit Galaxy S21 daughterboard guide\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eFull fitment details: \u003ca href=\"https:\/\/screwfitmentdatabase.com\/fits\/samsung-galaxy-s24\"\u003escrewfitmentdatabase.com\/fits\/samsung-galaxy-s24\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eCheck Before Ordering\u003c\/h3\u003e\u003cp\u003eCheck before ordering: our screw is M1.4 x 0.3 mm thread, 3.5 mm long measured under the head, with a 2.5 mm wide thin flat (wafer) head that is not countersunk; black, Phillips drive. Compare with the screw you removed (thread, length and head).\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHead is 2.5 mm wide; compare with your original.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eThread, length and head all have to match. A screw that is too long can push into the parts behind it; one that is too short or has the wrong head will not hold. This is a flat wafer head that sits on the surface, for flat seats only (not countersunk holes).\u003c\/p\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20 x M1.4 x 3.5mm black wafer head Phillips machine screws\u003c\/li\u003e\n\u003cli\u003eBrand new, bagged and labelled\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M1.4 x 0.3mm (metric coarse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3.5mm (under the head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Wafer head (thin, flat, not countersunk)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 2.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 20 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e compatible-size replacement screws, not genuine Samsung parts. Brand and model names are used only to describe fit. Please verify the size against your device's manual or the original screw before ordering.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"20-Pack","offer_id":67717620826186,"sku":"M1.4X3.5-WAF-BLK-20PK-SAM-S21","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/ebour-m14x35-wafer-black_5f515d7c-fd51-4082-ab31-bd962359444c.jpg?v=1792210838"},{"product_id":"m1-4-x-3mm-black-wafer-head-internal-screws-for-samsung-galaxy-s20-z-flip-z-fold2-s7-tab-s4-20-pack-replacement","title":"M1.4 x 3mm Black Wafer Head Internal Screws for Samsung Galaxy S20+, Z Flip, Z Fold2, S7, Tab S4 – 20-Pack Replacement","description":"\u003ch2\u003eM1.4 x 3mm Black Wafer Head Internal Screws for Samsung Galaxy S20+, Z Flip, Z Fold2, S7, Tab S4 – 20-Pack Replacement\u003c\/h2\u003e\u003cp\u003e20 replacement M1.4 x 3mm black wafer head Phillips screws for Samsung Galaxy S20+, Z Flip \/ Z Fold2, S6 \/ S7, Note 8 and Tab S4 10.5 internal screws. Compatible size: a parts reseller sells the Samsung service part \"Screw M1.4 L3\" (6001-003226) for these Galaxy models. The listing does not give head size or colour.\u003c\/p\u003e\u003ch3\u003eFits these models\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDevice\u003c\/th\u003e\n\u003cth\u003eWhere it goes\u003c\/th\u003e\n\u003cth\u003eQty per unit\u003c\/th\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSamsung Galaxy S20+\u003c\/td\u003e\n\u003ctd\u003einternal screw\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/2repair.parts\/product\/samsung-screw-m1-4-l3-34925\"\u003e2repair.parts listing of Samsung service part (reseller)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSamsung Galaxy Z Flip, Z Flip 5G, Z Fold2 5G\u003c\/td\u003e\n\u003ctd\u003einternal screw\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/2repair.parts\/product\/samsung-screw-m1-4-l3-50918\"\u003e2repair.parts listing of Samsung service part (reseller)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSamsung Galaxy S6, S7, S7 Edge, Note 8, A3\/A5\/A7 (2016-2017), A51, A71, Tab S4 10.5, Tab Active2, Buds Live\u003c\/td\u003e\n\u003ctd\u003einternal screw\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/2repair.parts\/product\/samsung-screw-m1-4-l3-2870\"\u003e2repair.parts listing of Samsung service part (reseller)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eFull fitment details: \u003ca href=\"https:\/\/screwfitmentdatabase.com\/screws\/m1-4\"\u003escrewfitmentdatabase.com\/screws\/m1-4\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eCheck Before Ordering\u003c\/h3\u003e\u003cp\u003eCheck before ordering: our screw is M1.4 x 0.3 mm thread, 3 mm long measured under the head, with a 2.5 mm wide thin flat (wafer) head that is not countersunk; black, Phillips drive. Compare with the screw you removed (thread, length and head).\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHead is 2.5 mm wide; compare with your original.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eThread, length and head all have to match. A screw that is too long can push into the parts behind it; one that is too short or has the wrong head will not hold. This is a flat wafer head that sits on the surface, for flat seats only (not countersunk holes).\u003c\/p\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20 x M1.4 x 3mm black wafer head Phillips machine screws\u003c\/li\u003e\n\u003cli\u003eBrand new, bagged and labelled\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M1.4 x 0.3mm (metric coarse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3mm (under the head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Wafer head (thin, flat, not countersunk)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 2.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 20 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e compatible-size replacement screws, not genuine Samsung parts. Brand and model names are used only to describe fit. Please verify the size against your device's manual or the original screw before ordering.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"20-Pack","offer_id":67717621022794,"sku":"M1.4X3-WAF-BLK-20PK-SAM-S20P","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/ebour-m14x3-wafer-black_1436fbc5-2682-4888-a14f-b3b72c0fb2dd.jpg?v=1792210846"},{"product_id":"m1-4-x-3mm-black-wafer-head-i-o-board-screws-for-asus-rog-ally-rc71l-20-pack-replacement","title":"M1.4 x 3mm Black Wafer Head I\/O Board Screws for ASUS ROG Ally RC71L – 20-Pack Replacement","description":"\u003ch2\u003eM1.4 x 3mm Black Wafer Head I\/O Board Screws for ASUS ROG Ally RC71L – 20-Pack Replacement\u003c\/h2\u003e\u003cp\u003e20 replacement M1.4 x 3mm black wafer head Phillips screws for ASUS ROG Ally (RC71L) I\/O board \/ analog stick and haptic motor section. ASUS's ROG Ally RC71L service manual lists M1.4 X 3.0L screws (4) in the I\/O board (analog sticks and haptic motors) section.\u003c\/p\u003e\u003ch3\u003eFits these models\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDevice\u003c\/th\u003e\n\u003cth\u003eWhere it goes\u003c\/th\u003e\n\u003cth\u003eQty per unit\u003c\/th\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASUS ROG Ally RC71L\u003c\/td\u003e\n\u003ctd\u003eI\/O board (analog sticks and haptic motors)\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/dlcdnets.asus.com\/pub\/ASUS\/GamingNB\/RC71L\/E22604_NR2301L_SM_V3_WEB.pdf\"\u003eASUS ROG Ally RC71L service manual E22604 V3 (dlcdnets.asus.com)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eFull fitment details: \u003ca href=\"https:\/\/screwfitmentdatabase.com\/fits\/asus-rog-ally-rc71l\"\u003escrewfitmentdatabase.com\/fits\/asus-rog-ally-rc71l\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eCheck Before Ordering\u003c\/h3\u003e\u003cp\u003eCheck before ordering: our screw is M1.4 x 0.3 mm thread, 3 mm long measured under the head, with a 2.5 mm wide thin flat (wafer) head that is not countersunk; black, Phillips drive. Compare with the screw you removed (thread, length and head).\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHead is 2.5 mm wide; compare with your original. The battery uses M1.6 screws, not these.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eThread, length and head all have to match. A screw that is too long can push into the parts behind it; one that is too short or has the wrong head will not hold. This is a flat wafer head that sits on the surface, for flat seats only (not countersunk holes).\u003c\/p\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20 x M1.4 x 3mm black wafer head Phillips machine screws\u003c\/li\u003e\n\u003cli\u003eBrand new, bagged and labelled\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M1.4 x 0.3mm (metric coarse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3mm (under the head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Wafer head (thin, flat, not countersunk)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 2.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 20 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e compatible-size replacement screws, not genuine ASUS parts. Brand and model names are used only to describe fit. Please verify the size against your device's manual or the original screw before ordering.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"20-Pack","offer_id":67717697208394,"sku":"M1.4X3-WAF-BLK-20PK-ROG-ALLY","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/ebour-m14x3-wafer-black_e72145fa-1228-4446-83ea-e4ade09b0567.jpg?v=1792212239"},{"product_id":"m1-4-x-3mm-black-wafer-head-whoop-motor-screws-for-betafpv-meteor65-meteor75-air75-ii-cetus-pro-20-pack-replacement","title":"M1.4 x 3mm Black Wafer Head Whoop Motor Screws for BetaFPV Meteor65, Meteor75, Air75 II \u0026 Cetus Pro – 20-Pack Replacement","description":"\u003ch2\u003eM1.4 x 3mm Black Wafer Head Whoop Motor Screws for BetaFPV Meteor65, Meteor75, Air75 II \u0026amp; Cetus Pro – 20-Pack Replacement\u003c\/h2\u003e\u003cp\u003e20 replacement M1.4 x 3mm black wafer head Phillips screws for BETAFPV Meteor65 \/ Meteor75 (Pro), Air75 II, Cetus Pro and 1102 \/ 0802 \/ 0802SE brushless whoop motors. BETAFPV's own screw pack lists M1.4*3 as the motor fixing screw for the Air75 II, Air75 II frame, 0802 brushless motors (2026), Meteor65, Meteor65 Pro, Meteor75, Meteor75 Pro, Cetus Pro drone and frames, 1102 and 0802SE motors. 20 screws = a full set of 4 motors with spares.\u003c\/p\u003e\u003ch3\u003eFits these models\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDevice\u003c\/th\u003e\n\u003cth\u003eWhere it goes\u003c\/th\u003e\n\u003cth\u003eQty per unit\u003c\/th\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBETAFPV Meteor65 \/ Meteor65 Pro\u003c\/td\u003e\n\u003ctd\u003emotor to frame\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/betafpv.com\/products\/meteor-series-motor-fixing-screws-pack-40pcs\"\u003eBETAFPV Meteor\/Air Series Motor Fixing Screws Pack (betafpv.com)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBETAFPV Meteor75 \/ Meteor75 Pro\u003c\/td\u003e\n\u003ctd\u003emotor to frame\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/betafpv.com\/products\/meteor-series-motor-fixing-screws-pack-40pcs\"\u003eBETAFPV Meteor\/Air Series Motor Fixing Screws Pack (betafpv.com)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBETAFPV Air75 II\u003c\/td\u003e\n\u003ctd\u003emotor to frame\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/betafpv.com\/products\/meteor-series-motor-fixing-screws-pack-40pcs\"\u003eBETAFPV Meteor\/Air Series Motor Fixing Screws Pack (betafpv.com)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBETAFPV Cetus Pro\u003c\/td\u003e\n\u003ctd\u003emotor to frame\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/betafpv.com\/products\/meteor-series-motor-fixing-screws-pack-40pcs\"\u003eBETAFPV Meteor\/Air Series Motor Fixing Screws Pack (betafpv.com)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eFull fitment details: \u003ca href=\"https:\/\/screwfitmentdatabase.com\/fits\/betafpv-meteor-cetus-whoop-motor-screws\"\u003escrewfitmentdatabase.com\/fits\/betafpv-meteor-cetus-whoop-motor-screws\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eCheck Before Ordering\u003c\/h3\u003e\u003cp\u003eCheck before ordering: our screw is M1.4 x 0.3 mm thread, 3 mm long measured under the head, with a 2.5 mm wide thin flat (wafer) head that is not countersunk; black, Phillips drive. Compare with the screw you removed (thread, length and head).\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSteel screws (heavier than PEEK). Head is 2.5 mm wide.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eThread, length and head all have to match. A screw that is too long can push into the parts behind it; one that is too short or has the wrong head will not hold. This is a flat wafer head that sits on the surface, for flat seats only (not countersunk holes).\u003c\/p\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20 x M1.4 x 3mm black wafer head Phillips machine screws\u003c\/li\u003e\n\u003cli\u003eBrand new, bagged and labelled\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M1.4 x 0.3mm (metric coarse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3mm (under the head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Wafer head (thin, flat, not countersunk)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 2.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 20 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e compatible-size replacement screws, not genuine BETAFPV parts. Brand and model names are used only to describe fit. Please verify the size against your device's manual or the original screw before ordering.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"20-Pack","offer_id":67717697339466,"sku":"M1.4X3-WAF-BLK-20PK-BETAFPV","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/ebour-m14x3-wafer-black_9fcbdc4b-dd89-4c64-b683-97f5da18e132.jpg?v=1792212246"},{"product_id":"m1-4-x-3-5mm-black-wafer-head-headphone-housing-screws-for-sennheiser-momentum-on-ear-m2-oebt-oeg-oei-20-pack-replacement","title":"M1.4 x 3.5mm Black Wafer Head Headphone Housing Screws for Sennheiser MOMENTUM On-Ear, M2 OEBT, OEG \u0026 OEi – 20-Pack Replacement","description":"\u003ch2\u003eM1.4 x 3.5mm Black Wafer Head Headphone Housing Screws for Sennheiser MOMENTUM On-Ear, M2 OEBT, OEG \u0026amp; OEi – 20-Pack Replacement\u003c\/h2\u003e\u003cp\u003e20 replacement M1.4 x 3.5mm black wafer head Phillips screws for Sennheiser MOMENTUM On-Ear and MOMENTUM M2 OEBT \/ OEG \/ OEi headphones. Compatible size: a parts retailer sells Sennheiser part 556939 \"Screw 1.4x3.5\" for these MOMENTUM On-Ear headphones. The listing does not give head size or colour.\u003c\/p\u003e\u003ch3\u003eFits these models\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDevice\u003c\/th\u003e\n\u003cth\u003eWhere it goes\u003c\/th\u003e\n\u003cth\u003eQty per unit\u003c\/th\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSennheiser MOMENTUM M2 OEBT\u003c\/td\u003e\n\u003ctd\u003eheadphone housing\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/artaudioparts.eu\/products\/screw-1-4x3-5-for-sennheiser-momentum-m2-oebt-oeg-oei-momentum-on-ear\"\u003eSennheiser spare part 556939 \"Screw 1.4x3.5\" (parts retailer artaudioparts.eu)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSennheiser MOMENTUM M2 OEG\u003c\/td\u003e\n\u003ctd\u003eheadphone housing\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/artaudioparts.eu\/products\/screw-1-4x3-5-for-sennheiser-momentum-m2-oebt-oeg-oei-momentum-on-ear\"\u003eSennheiser spare part 556939 \"Screw 1.4x3.5\" (parts retailer artaudioparts.eu)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSennheiser MOMENTUM M2 OEi\u003c\/td\u003e\n\u003ctd\u003eheadphone housing\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/artaudioparts.eu\/products\/screw-1-4x3-5-for-sennheiser-momentum-m2-oebt-oeg-oei-momentum-on-ear\"\u003eSennheiser spare part 556939 \"Screw 1.4x3.5\" (parts retailer artaudioparts.eu)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSennheiser MOMENTUM On-Ear\u003c\/td\u003e\n\u003ctd\u003eheadphone housing\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/artaudioparts.eu\/products\/screw-1-4x3-5-for-sennheiser-momentum-m2-oebt-oeg-oei-momentum-on-ear\"\u003eSennheiser spare part 556939 \"Screw 1.4x3.5\" (parts retailer artaudioparts.eu)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eFull fitment details: \u003ca href=\"https:\/\/screwfitmentdatabase.com\/fits\/sennheiser-momentum-m2-on-ear-headphone\"\u003escrewfitmentdatabase.com\/fits\/sennheiser-momentum-m2-on-ear-headphone\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eCheck Before Ordering\u003c\/h3\u003e\u003cp\u003eCheck before ordering: our screw is M1.4 x 0.3 mm thread, 3.5 mm long measured under the head, with a 2.5 mm wide thin flat (wafer) head that is not countersunk; black, Phillips drive. Compare with the screw you removed (thread, length and head).\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHead is 2.5 mm wide; compare with your original.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eThread, length and head all have to match. A screw that is too long can push into the parts behind it; one that is too short or has the wrong head will not hold. This is a flat wafer head that sits on the surface, for flat seats only (not countersunk holes).\u003c\/p\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20 x M1.4 x 3.5mm black wafer head Phillips machine screws\u003c\/li\u003e\n\u003cli\u003eBrand new, bagged and labelled\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M1.4 x 0.3mm (metric coarse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3.5mm (under the head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Wafer head (thin, flat, not countersunk)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 2.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 20 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e compatible-size replacement screws, not genuine Sennheiser parts. Brand and model names are used only to describe fit. Please verify the size against your device's manual or the original screw before ordering.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"20-Pack","offer_id":67717697699914,"sku":"M1.4X3.5-WAF-BLK-20PK-SENN-MOM","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/ebour-m14x35-wafer-black_e23e8cec-780c-4d9a-9b4b-44858ff48212.jpg?v=1792212268"},{"product_id":"m1-4-x-3mm-black-wafer-head-battery-lock-screws-for-sennheiser-mkh800-sk6000-sk5012-20-pack-replacement","title":"M1.4 x 3mm Black Wafer Head Battery Lock Screws for Sennheiser MKH800, SK6000 \u0026 SK5012 – 20-Pack Replacement","description":"\u003ch2\u003eM1.4 x 3mm Black Wafer Head Battery Lock Screws for Sennheiser MKH800, SK6000 \u0026amp; SK5012 – 20-Pack Replacement\u003c\/h2\u003e\u003cp\u003e20 replacement M1.4 x 3mm black wafer head Phillips screws for Sennheiser MKH800 button and SK6000 \/ SK5012 bodypack battery-locking mechanism. Compatible size: Sennheiser spare part 589026 is sold as \"Screw M1.4 x 3\" (small black cross-head screw) for the MKH800 button, the SK6000 battery-locking mechanism and the SK5012.\u003c\/p\u003e\u003ch3\u003eFits these models\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDevice\u003c\/th\u003e\n\u003cth\u003eWhere it goes\u003c\/th\u003e\n\u003cth\u003eQty per unit\u003c\/th\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSennheiser MKH800\u003c\/td\u003e\n\u003ctd\u003ebutton\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/www.sennprospares.co.uk\/shop\/Screw-M1-4-x-3-for-MKH800-SK6000-and-other-products-p643752955\"\u003eSennheiser spare part 589026 \"Screw M1.4 x 3\" (Sennheiser spares retailer sennprospares.co.uk)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSennheiser SK6000\u003c\/td\u003e\n\u003ctd\u003ebattery-locking mechanism\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/www.sennprospares.co.uk\/shop\/Screw-M1-4-x-3-for-MKH800-SK6000-and-other-products-p643752955\"\u003eSennheiser spare part 589026 \"Screw M1.4 x 3\" (Sennheiser spares retailer sennprospares.co.uk)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSennheiser SK5012\u003c\/td\u003e\n\u003ctd\u003ebattery-locking mechanism\u003c\/td\u003e\n\u003ctd\u003enot stated\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/www.sennprospares.co.uk\/shop\/Screw-M1-4-x-3-for-MKH800-SK6000-and-other-products-p643752955\"\u003eSennheiser spare part 589026 \"Screw M1.4 x 3\" (Sennheiser spares retailer sennprospares.co.uk)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eFull fitment details: \u003ca href=\"https:\/\/screwfitmentdatabase.com\/fits\/sennheiser-sk6000-mkh800-battery-lock\"\u003escrewfitmentdatabase.com\/fits\/sennheiser-sk6000-mkh800-battery-lock\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eCheck Before Ordering\u003c\/h3\u003e\u003cp\u003eCheck before ordering: our screw is M1.4 x 0.3 mm thread, 3 mm long measured under the head, with a 2.5 mm wide thin flat (wafer) head that is not countersunk; black, Phillips drive. Compare with the screw you removed (thread, length and head).\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHead is 2.5 mm wide; compare with your original.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eThread, length and head all have to match. A screw that is too long can push into the parts behind it; one that is too short or has the wrong head will not hold. This is a flat wafer head that sits on the surface, for flat seats only (not countersunk holes).\u003c\/p\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20 x M1.4 x 3mm black wafer head Phillips machine screws\u003c\/li\u003e\n\u003cli\u003eBrand new, bagged and labelled\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M1.4 x 0.3mm (metric coarse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3mm (under the head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Wafer head (thin, flat, not countersunk)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 2.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 20 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e compatible-size replacement screws, not genuine Sennheiser parts. Brand and model names are used only to describe fit. Please verify the size against your device's manual or the original screw before ordering.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"20-Pack","offer_id":67717697830986,"sku":"M1.4X3-WAF-BLK-20PK-SENN-MKH","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/ebour-m14x3-wafer-black_4ff3abb4-d7f5-4484-a4c6-3d7ba12ae0eb.jpg?v=1792212276"}],"url":"https:\/\/techsparewarehouse.com\/collections\/m1-4-screws.oembed","provider":"Techsparewarehouse","version":"1.0","type":"link"}