{"title":"M3 x 8mm Screws","description":"\u003cp\u003eEvery M3 x 8mm screw we carry, in two head styles. Black Phillips wafer head (low profile, flat underside) for PC case fans and radiators, RC chassis and resin 3D printer vats, and silver zinc-plated countersunk (DIN 965) packs of 10, 50 and 100 for countersunk holes in RC and 3D printer parts.\u003c\/p\u003e\u003ctable class=\"tsw-dim\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM3 x 0.5, 8 mm long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBlack head\u003c\/th\u003e\n\u003ctd\u003ePhillips wafer head, low profile, about 6 mm across, not countersunk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSilver head\u003c\/th\u003e\n\u003ctd\u003ePhillips flat head, countersunk, zinc plated (DIN 965); length measured overall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eHow to measure\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e the outside diameter of the threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e measured from under the head to the tip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMatch the head to the hole:\u003c\/strong\u003e a countersunk (cone-shaped) hole needs the silver flat head; a flat seat takes the black wafer head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e \u003ca href=\"\/collections\/m3-screws\"\u003eAll M3 screws\u003c\/a\u003e · \u003ca href=\"\/collections\/m3-x-6mm-screws\"\u003eM3 x 6mm\u003c\/a\u003e · \u003ca href=\"\/blogs\/news\/the-ultimate-guide-to-3d-printer-screws\"\u003e3D printer screw sizes\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"m3-x-8mm-screws-for-leather-spike-attachments-guitar-straps-10-pack","title":"M3 x 8mm Screws for Leather Spike Attachments Guitar Straps 10-Pack","description":"\u003ch2\u003eM3 x 8mm Screws for Leather Spike Attachments | Guitar Straps and Gauntlets | 10-Pack\u003c\/h2\u003e\u003cp\u003eM3 x 8mm Phillips wafer head screws for attaching metal spikes to thick leather guitar straps gauntlets belts and costume accessories.\u003c\/p\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eSpike attachments on thick leather require a longer screw for proper thread engagement. The 8mm length passes through thick leather without protruding excessively.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStripped threads and damaged housings\u003c\/li\u003e\n\u003cli\u003eLoose components causing poor performance or failure\u003c\/li\u003e\n\u003cli\u003ePermanent damage to delicate parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMetal spike attachment on leather guitar straps\u003c\/li\u003e\n\u003cli\u003ePunk and metal band gauntlet and wristband spikes\u003c\/li\u003e\n\u003cli\u003eLeather belt and accessory spike hardware\u003c\/li\u003e\n\u003cli\u003eCostume and cosplay armor spike attachment\u003c\/li\u003e\n\u003cli\u003eGeneral thick leather craft spike mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Type:\u003c\/strong\u003e Machine Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Phillips Wafer Head Low Profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Style:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard:\u003c\/strong\u003e Metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10 Screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e M3 screws are not compatible with M2 or M2.5 threaded holes. Please verify your thread size before ordering.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"Default Title","offer_id":43433437069386,"sku":"M3X8-PFH-CS-BLK-10PK-LTHR","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/s-l1600_4665c4c0-2fa9-4f1f-8a48-1292fd4b96fa.webp?v=1774301958"},{"product_id":"m3-x-8mm-phillips-flat-head-screw-for-pc-case-fan-radiator-install-single-replacement-black","title":"M3 x 8mm Phillips Wafer Head Screw for PC Case Fan \u0026 Radiator Install - Single Replacement Black","description":"\u003ch2\u003eM3 x 8mm Phillips Wafer Head Screw for PC Case Fan \u0026amp; Radiator Install\u003c\/h2\u003e\u003cp\u003eLost a single screw during a repair? This listing is for one (1) M3 x 8mm Phillips wafer head black oxide carbon steel screw, sized specifically for use in PC Case Fan \u0026amp; Radiator Install. Sold individually so you only buy what you actually need.\u003c\/p\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eUsing the wrong screw size can cause permanent damage to your hardware. A screw that is too long can puncture components, crack motherboards, or push through chassis. A screw too short will not hold, and the wrong thread diameter will strip threads in their seats and ruin standoffs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWrong length: punctured PCBs, cracked housings, broken battery cells\u003c\/li\u003e\n\u003cli\u003eWrong diameter: stripped threads in standoffs and inserts\u003c\/li\u003e\n\u003cli\u003eWrong drive type: cammed-out heads and unrecoverable fasteners\u003c\/li\u003e\n\u003cli\u003eWrong finish: corrosion and rust over time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQuantity: 1 (one) screw - sold individually\u003c\/li\u003e\n\u003cli\u003eThread: M3 (metric coarse, 0.5mm pitch)\u003c\/li\u003e\n\u003cli\u003eLength: 8mm under the head\u003c\/li\u003e\n\u003cli\u003eHead style: Phillips wafer head \u003c\/li\u003e\n\u003cli\u003eMaterial: carbon steel with black oxide finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThis M3 x 8mm screw is commonly used in:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePC Case Fan \u0026amp; Radiator Install\u003c\/li\u003e\n\u003cli\u003eCompatible models: Noctua, Corsair, Arctic 120\/140mm Fans\u003c\/li\u003e\n\u003cli\u003eOther equipment using M3 x 8mm Phillips wafer head fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eScrew size: M3 x 8mm\u003c\/li\u003e\n\u003cli\u003eThread diameter: 3mm\u003c\/li\u003e\n\u003cli\u003eThread pitch: 0.5mm (metric standard)\u003c\/li\u003e\n\u003cli\u003eLength: 8mm\u003c\/li\u003e\n\u003cli\u003eHead: flat \/  Phillips drive\u003c\/li\u003e\n\u003cli\u003eMaterial: carbon steel\u003c\/li\u003e\n\u003cli\u003eFinish: black oxide\u003c\/li\u003e\n\u003cli\u003eStandard: Metric\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Do not mix metric M-sizes. M2 and M2.5 look similar but have different thread diameters and pitches - using the wrong one will cross-thread or strip the seat. Always verify the original screw's diameter and length before installing.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"Default Title","offer_id":43542360227914,"sku":"M3X8-PFH-CS-BLK-1PK-PCFAN-057","price":0.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/s-l1600_c0462896-9dcf-4ec6-a01f-6e41ad4a62d5.webp?v=1777162956"},{"product_id":"m3-x-8mm-phillips-flat-head-screw-for-rc-cartruck-chassis-mount-single-replacement-black","title":"M3 x 8mm Phillips Wafer Head Screw for RC Car\/Truck Chassis Mount - Single Replacement Black","description":"\u003ch2\u003eM3 x 8mm Phillips Wafer Head Screw for RC Car\/Truck Chassis Mount\u003c\/h2\u003e\u003cp\u003eLost a single screw during a repair? This listing is for one (1) M3 x 8mm Phillips wafer head black oxide carbon steel screw, sized specifically for use in RC Car\/Truck Chassis Mount. Sold individually so you only buy what you actually need.\u003c\/p\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eUsing the wrong screw size can cause permanent damage to your hardware. A screw that is too long can puncture components, crack motherboards, or push through chassis. A screw too short will not hold, and the wrong thread diameter will strip threads in their seats and ruin standoffs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWrong length: punctured PCBs, cracked housings, broken battery cells\u003c\/li\u003e\n\u003cli\u003eWrong diameter: stripped threads in standoffs and inserts\u003c\/li\u003e\n\u003cli\u003eWrong drive type: cammed-out heads and unrecoverable fasteners\u003c\/li\u003e\n\u003cli\u003eWrong finish: corrosion and rust over time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQuantity: 1 (one) screw - sold individually\u003c\/li\u003e\n\u003cli\u003eThread: M3 (metric coarse, 0.5mm pitch)\u003c\/li\u003e\n\u003cli\u003eLength: 8mm under the head\u003c\/li\u003e\n\u003cli\u003eHead style: Phillips wafer head \u003c\/li\u003e\n\u003cli\u003eMaterial: carbon steel with black oxide finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThis M3 x 8mm screw is commonly used in:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRC Car\/Truck Chassis Mount\u003c\/li\u003e\n\u003cli\u003eCompatible models: Traxxas, Arrma, Losi RC Vehicles\u003c\/li\u003e\n\u003cli\u003eOther equipment using M3 x 8mm Phillips wafer head fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eScrew size: M3 x 8mm\u003c\/li\u003e\n\u003cli\u003eThread diameter: 3mm\u003c\/li\u003e\n\u003cli\u003eThread pitch: 0.5mm (metric standard)\u003c\/li\u003e\n\u003cli\u003eLength: 8mm\u003c\/li\u003e\n\u003cli\u003eHead: flat \/  Phillips drive\u003c\/li\u003e\n\u003cli\u003eMaterial: carbon steel\u003c\/li\u003e\n\u003cli\u003eFinish: black oxide\u003c\/li\u003e\n\u003cli\u003eStandard: Metric\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Do not mix metric M-sizes. M2 and M2.5 look similar but have different thread diameters and pitches - using the wrong one will cross-thread or strip the seat. Always verify the original screw's diameter and length before installing.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"Default Title","offer_id":43542360981578,"sku":"M3X8-PFH-CS-BLK-1PK-RCCAR-081","price":0.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/s-l1600_d90c491a-83c5-43fe-b44d-eb56d9d622fb.webp?v=1777162977"},{"product_id":"m3-x-8mm-phillips-flat-head-screw-for-sla-resin-3d-printer-vat-film-single-replacement-black","title":"M3 x 8mm Phillips Wafer Head Screw for SLA Resin 3D Printer VAT Film - Single Replacement Black","description":"\u003ch2\u003eM3 x 8mm Phillips Wafer Head Screw for SLA Resin 3D Printer VAT Film\u003c\/h2\u003e\u003cp\u003eLost a single screw during a repair? This listing is for one (1) M3 x 8mm Phillips wafer head black oxide carbon steel screw, sized specifically for use in SLA Resin 3D Printer VAT Film. Sold individually so you only buy what you actually need.\u003c\/p\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eUsing the wrong screw size can cause permanent damage to your hardware. A screw that is too long can puncture components, crack motherboards, or push through chassis. A screw too short will not hold, and the wrong thread diameter will strip threads in their seats and ruin standoffs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWrong length: punctured PCBs, cracked housings, broken battery cells\u003c\/li\u003e\n\u003cli\u003eWrong diameter: stripped threads in standoffs and inserts\u003c\/li\u003e\n\u003cli\u003eWrong drive type: cammed-out heads and unrecoverable fasteners\u003c\/li\u003e\n\u003cli\u003eWrong finish: corrosion and rust over time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQuantity: 1 (one) screw - sold individually\u003c\/li\u003e\n\u003cli\u003eThread: M3 (metric coarse, 0.5mm pitch)\u003c\/li\u003e\n\u003cli\u003eLength: 8mm under the head\u003c\/li\u003e\n\u003cli\u003eHead style: Phillips wafer head \u003c\/li\u003e\n\u003cli\u003eMaterial: carbon steel with black oxide finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThis M3 x 8mm screw is commonly used in:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSLA Resin 3D Printer VAT Film\u003c\/li\u003e\n\u003cli\u003eCompatible models: Elegoo Mars, Anycubic Photon, etc.\u003c\/li\u003e\n\u003cli\u003eOther equipment using M3 x 8mm Phillips wafer head fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eScrew size: M3 x 8mm\u003c\/li\u003e\n\u003cli\u003eThread diameter: 3mm\u003c\/li\u003e\n\u003cli\u003eThread pitch: 0.5mm (metric standard)\u003c\/li\u003e\n\u003cli\u003eLength: 8mm\u003c\/li\u003e\n\u003cli\u003eHead: flat \/  Phillips drive\u003c\/li\u003e\n\u003cli\u003eMaterial: carbon steel\u003c\/li\u003e\n\u003cli\u003eFinish: black oxide\u003c\/li\u003e\n\u003cli\u003eStandard: Metric\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Do not mix metric M-sizes. M2 and M2.5 look similar but have different thread diameters and pitches - using the wrong one will cross-thread or strip the seat. Always verify the original screw's diameter and length before installing.\u003c\/p\u003e","brand":"TechSpareWarehouse","offers":[{"title":"Default Title","offer_id":43542361112650,"sku":"M3X8-PFH-CS-BLK-1PK-RESVAT-085","price":0.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/s-l1600_e10ebe3f-561f-4bc0-9967-f1837f3a07fe.webp?v=1777162981"},{"product_id":"m3-x-8mm-phillips-flat-head-countersunk-machine-screws-zinc-silver-10-pack-for-rc-3d-printers","title":"M3 x 8mm Phillips Flat Head Countersunk Machine Screws Zinc Silver 10-Pack for RC \u0026 3D Printers","description":"\u003ch2\u003eM3 x 8mm Phillips Flat Head Countersunk Machine Screws | Zinc Plated Silver | 10-Pack\u003c\/h2\u003e\u003cp\u003e10 M3 x 8mm Phillips flat head machine screws to DIN 965: metric M3 x 0.5mm coarse thread, 90° countersunk head that sits flush, class 4.8 steel with clear (silver) zinc plating. For RC models, 3D printers, electronics enclosures, mounts and laptop or device repairs that use a countersunk M3 screw.\u003c\/p\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eA flat head screw has to match three things: the thread, the overall length and the 90° head. Too long and it can bottom out or touch a board; too short and it will not hold; the wrong head sits proud or pulls through.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWrong thread (M2 vs M2.5 vs M3): stripped holes and inserts\u003c\/li\u003e\n\u003cli\u003eWrong length: punctured parts or loose panels\u003c\/li\u003e\n\u003cli\u003ePan or wafer head in a countersunk hole: the head sticks up and snags\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 x M3 x 8mm Phillips flat head (countersunk) machine screws\u003c\/li\u003e\n\u003cli\u003eClear zinc plated (trivalent, RoHS) carbon steel, class 4.8; magnetic\u003c\/li\u003e\n\u003cli\u003eBrand new\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Check Your Screw\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M3 measures about 2.9-3mm across the threads; pitch 0.5mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e on a flat head screw, measure from the \u003cem\u003etop of the head\u003c\/em\u003e to the tip: 8mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e cone-shaped, 5.6mm across, sits flush in a 90° countersink. If your original is flat underneath (pan or wafer head), this is not the right screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e Phillips PH1.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Type:\u003c\/strong\u003e Machine Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M3 x 0.5mm (metric coarse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8mm overall (includes the head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head, Countersunk 90°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 5.6mm max; head height 1.65mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Style:\u003c\/strong\u003e Phillips PH1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e DIN 965 (ISO 7046 equivalent)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel, property class 4.8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Clear zinc plated (Cr3+, RoHS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10 Screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Please verify your thread size before ordering. M3 screws are not interchangeable with other M sizes.\u003c\/p\u003e\n\n\u003c!-- tsw-fits:start --\u003e\u003cdiv class=\"tsw-fits\"\u003e\n\u003ch3\u003eFits \/ replaces flat head screws in\u003c\/h3\u003e\n\u003cp\u003eEach row comes from a parts list, manual or maker's spec that calls for an \u003cb\u003eM3 x 8mm countersunk (flat head)\u003c\/b\u003e screw. Where the original has a hex or Torx drive, this Phillips screw has the same thread, length and head shape.\u003c\/p\u003e\n\u003ctable class=\"tsw-fits-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDevice \/ model\u003c\/th\u003e\n\u003cth\u003eWhere the screw goes\u003c\/th\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraxxas T-Maxx, E-Maxx, Revo and Jato RC trucks\u003c\/td\u003e\n\u003ctd\u003e3x8mm countersunk machine screws (Traxxas 2550; the original is hex drive)\u003c\/td\u003e\n\u003ctd\u003etuah.wrekd.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoron StealthChanger toolhead backplates\u003c\/td\u003e\n\u003ctd\u003em3x6 or m3x8 flat head countersunk screws that must be magnetic (no stainless) for Tap; these zinc-plated steel screws are magnetic\u003c\/td\u003e\n\u003ctd\u003egithub.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen red dot sights on adapter plates (airsoft and optics)\u003c\/td\u003e\n\u003ctd\u003eM3 flat head screws in the M3x7.5 to M3x10 range fix the sight to the mount; M3x8 is a common length\u003c\/td\u003e\n\u003ctd\u003eredwolfairsoft.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eThe same M3 x 8mm size is also called out in (check the head first)\u003c\/h4\u003e\n\u003cp\u003eThese service documents list an M3 x 8mm screw, but the original head may be a pan, wafer or cap head. A flat head only sits flush in a countersunk (cone-shaped) hole, so compare with the screw you removed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHP LaserJet 9000 \/ 9040 \/ 9050 printers: parts list: Screw, M3 by 8 (XA9-1200-000CN) (qcs1.com)\u003c\/li\u003e\n\u003cli\u003eBixolon SRP-B300II receipt printer: cover, frame and mechanism screws M3x4 \/ M3x6 \/ M3x8 (bixolon.com)\u003c\/li\u003e\n\u003cli\u003eTSC MH241 \/ MH341 \/ MH641 label printers: parts list machine screws M3*5, M3*6, M3*8 (tsc-drucker.com)\u003c\/li\u003e\n\u003cli\u003eVivotek IT9389-H dome camera: camera-to-bracket screws on the AM-21M mount (vivotek.com)\u003c\/li\u003e\n\u003cli\u003eVerifone P400 PIN pad: front mounting plate screws (onlinehelp.ncrvoyix.com)\u003c\/li\u003e\n\u003cli\u003eStar Micronics mPOP under-counter mount CM-POP1: mount frame to the mPOP (starasia.com)\u003c\/li\u003e\n\u003cli\u003eQualGear QG-KIT-VA-3IN-B projector mount kit: universal plate hardware (media.digikey.com)\u003c\/li\u003e\n\u003cli\u003eHammond 1591 \/ 1555 enclosures: M3-0.5 x 8mm panel and PCB mounting screw (Hammond 1591MM100) (media.ic-find.com)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat does an M3 x 8mm flat head screw fit?\u003c\/h4\u003e\n\u003cp\u003eSources that call for an M3 x 8mm countersunk (flat head) screw include: Traxxas T-Maxx, E-Maxx, Revo and Jato RC trucks; Voron StealthChanger toolhead backplates; Open red dot sights on adapter plates (airsoft and optics). Measure your original screw first: M3 thread, 8mm long measured from the top of the head, cone-shaped head.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does an M3 x 8mm flat head screw fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Sources that call for an M3 x 8mm countersunk (flat head) screw include: Traxxas T-Maxx, E-Maxx, Revo and Jato RC trucks; Voron StealthChanger toolhead backplates; Open red dot sights on adapter plates (airsoft and optics). Measure your original screw first: M3 thread, 8mm long measured from the top of the head, cone-shaped head.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e\u003c!-- tsw-fits:end --\u003e","brand":"TechSpareWarehouse","offers":[{"title":"Default Title","offer_id":67693132972106,"sku":"M3X8-PFH-CS-SLV-10PK","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/m3x8-photo.jpg?v=1792031814"},{"product_id":"m3-x-8mm-phillips-flat-head-countersunk-machine-screws-zinc-silver-50-pack-for-rc-3d-printers","title":"M3 x 8mm Phillips Flat Head Countersunk Machine Screws Zinc Silver 50-Pack for RC \u0026 3D Printers","description":"\u003ch2\u003eM3 x 8mm Phillips Flat Head Countersunk Machine Screws | Zinc Plated Silver | 50-Pack\u003c\/h2\u003e\u003cp\u003e50 M3 x 8mm Phillips flat head machine screws to DIN 965: metric M3 x 0.5mm coarse thread, 90° countersunk head that sits flush, class 4.8 steel with clear (silver) zinc plating. For RC models, 3D printers, electronics enclosures, mounts and laptop or device repairs that use a countersunk M3 screw.\u003c\/p\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eA flat head screw has to match three things: the thread, the overall length and the 90° head. Too long and it can bottom out or touch a board; too short and it will not hold; the wrong head sits proud or pulls through.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWrong thread (M2 vs M2.5 vs M3): stripped holes and inserts\u003c\/li\u003e\n\u003cli\u003eWrong length: punctured parts or loose panels\u003c\/li\u003e\n\u003cli\u003ePan or wafer head in a countersunk hole: the head sticks up and snags\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e50 x M3 x 8mm Phillips flat head (countersunk) machine screws\u003c\/li\u003e\n\u003cli\u003eClear zinc plated (trivalent, RoHS) carbon steel, class 4.8; magnetic\u003c\/li\u003e\n\u003cli\u003eBrand new\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Check Your Screw\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M3 measures about 2.9-3mm across the threads; pitch 0.5mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e on a flat head screw, measure from the \u003cem\u003etop of the head\u003c\/em\u003e to the tip: 8mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e cone-shaped, 5.6mm across, sits flush in a 90° countersink. If your original is flat underneath (pan or wafer head), this is not the right screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e Phillips PH1.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Type:\u003c\/strong\u003e Machine Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M3 x 0.5mm (metric coarse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8mm overall (includes the head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head, Countersunk 90°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 5.6mm max; head height 1.65mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Style:\u003c\/strong\u003e Phillips PH1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e DIN 965 (ISO 7046 equivalent)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel, property class 4.8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Clear zinc plated (Cr3+, RoHS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 50 Screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Please verify your thread size before ordering. M3 screws are not interchangeable with other M sizes.\u003c\/p\u003e\n\n\u003c!-- tsw-fits:start --\u003e\u003cdiv class=\"tsw-fits\"\u003e\n\u003ch3\u003eFits \/ replaces flat head screws in\u003c\/h3\u003e\n\u003cp\u003eEach row comes from a parts list, manual or maker's spec that calls for an \u003cb\u003eM3 x 8mm countersunk (flat head)\u003c\/b\u003e screw. Where the original has a hex or Torx drive, this Phillips screw has the same thread, length and head shape.\u003c\/p\u003e\n\u003ctable class=\"tsw-fits-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDevice \/ model\u003c\/th\u003e\n\u003cth\u003eWhere the screw goes\u003c\/th\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraxxas T-Maxx, E-Maxx, Revo and Jato RC trucks\u003c\/td\u003e\n\u003ctd\u003e3x8mm countersunk machine screws (Traxxas 2550; the original is hex drive)\u003c\/td\u003e\n\u003ctd\u003etuah.wrekd.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoron StealthChanger toolhead backplates\u003c\/td\u003e\n\u003ctd\u003em3x6 or m3x8 flat head countersunk screws that must be magnetic (no stainless) for Tap; these zinc-plated steel screws are magnetic\u003c\/td\u003e\n\u003ctd\u003egithub.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen red dot sights on adapter plates (airsoft and optics)\u003c\/td\u003e\n\u003ctd\u003eM3 flat head screws in the M3x7.5 to M3x10 range fix the sight to the mount; M3x8 is a common length\u003c\/td\u003e\n\u003ctd\u003eredwolfairsoft.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eThe same M3 x 8mm size is also called out in (check the head first)\u003c\/h4\u003e\n\u003cp\u003eThese service documents list an M3 x 8mm screw, but the original head may be a pan, wafer or cap head. A flat head only sits flush in a countersunk (cone-shaped) hole, so compare with the screw you removed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHP LaserJet 9000 \/ 9040 \/ 9050 printers: parts list: Screw, M3 by 8 (XA9-1200-000CN) (qcs1.com)\u003c\/li\u003e\n\u003cli\u003eBixolon SRP-B300II receipt printer: cover, frame and mechanism screws M3x4 \/ M3x6 \/ M3x8 (bixolon.com)\u003c\/li\u003e\n\u003cli\u003eTSC MH241 \/ MH341 \/ MH641 label printers: parts list machine screws M3*5, M3*6, M3*8 (tsc-drucker.com)\u003c\/li\u003e\n\u003cli\u003eVivotek IT9389-H dome camera: camera-to-bracket screws on the AM-21M mount (vivotek.com)\u003c\/li\u003e\n\u003cli\u003eVerifone P400 PIN pad: front mounting plate screws (onlinehelp.ncrvoyix.com)\u003c\/li\u003e\n\u003cli\u003eStar Micronics mPOP under-counter mount CM-POP1: mount frame to the mPOP (starasia.com)\u003c\/li\u003e\n\u003cli\u003eQualGear QG-KIT-VA-3IN-B projector mount kit: universal plate hardware (media.digikey.com)\u003c\/li\u003e\n\u003cli\u003eHammond 1591 \/ 1555 enclosures: M3-0.5 x 8mm panel and PCB mounting screw (Hammond 1591MM100) (media.ic-find.com)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat does an M3 x 8mm flat head screw fit?\u003c\/h4\u003e\n\u003cp\u003eSources that call for an M3 x 8mm countersunk (flat head) screw include: Traxxas T-Maxx, E-Maxx, Revo and Jato RC trucks; Voron StealthChanger toolhead backplates; Open red dot sights on adapter plates (airsoft and optics). Measure your original screw first: M3 thread, 8mm long measured from the top of the head, cone-shaped head.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does an M3 x 8mm flat head screw fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Sources that call for an M3 x 8mm countersunk (flat head) screw include: Traxxas T-Maxx, E-Maxx, Revo and Jato RC trucks; Voron StealthChanger toolhead backplates; Open red dot sights on adapter plates (airsoft and optics). Measure your original screw first: M3 thread, 8mm long measured from the top of the head, cone-shaped head.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e\u003c!-- tsw-fits:end --\u003e","brand":"TechSpareWarehouse","offers":[{"title":"Default Title","offer_id":67693133234250,"sku":"M3X8-PFH-CS-SLV-50PK","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/m3x8-photo_9edc1664-8423-4a26-aaaa-79f46fb67bd9.jpg?v=1792031816"},{"product_id":"m3-x-8mm-phillips-flat-head-countersunk-machine-screws-zinc-silver-100-pack-for-rc-3d-printers","title":"M3 x 8mm Phillips Flat Head Countersunk Machine Screws Zinc Silver 100-Pack for RC \u0026 3D Printers","description":"\u003ch2\u003eM3 x 8mm Phillips Flat Head Countersunk Machine Screws | Zinc Plated Silver | 100-Pack\u003c\/h2\u003e\u003cp\u003e100 M3 x 8mm Phillips flat head machine screws to DIN 965: metric M3 x 0.5mm coarse thread, 90° countersunk head that sits flush, class 4.8 steel with clear (silver) zinc plating. For RC models, 3D printers, electronics enclosures, mounts and laptop or device repairs that use a countersunk M3 screw.\u003c\/p\u003e\u003ch3\u003eWhy the Right Screw Matters\u003c\/h3\u003e\u003cp\u003eA flat head screw has to match three things: the thread, the overall length and the 90° head. Too long and it can bottom out or touch a board; too short and it will not hold; the wrong head sits proud or pulls through.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWrong thread (M2 vs M2.5 vs M3): stripped holes and inserts\u003c\/li\u003e\n\u003cli\u003eWrong length: punctured parts or loose panels\u003c\/li\u003e\n\u003cli\u003ePan or wafer head in a countersunk hole: the head sticks up and snags\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e100 x M3 x 8mm Phillips flat head (countersunk) machine screws\u003c\/li\u003e\n\u003cli\u003eClear zinc plated (trivalent, RoHS) carbon steel, class 4.8; magnetic\u003c\/li\u003e\n\u003cli\u003eBrand new\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Check Your Screw\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M3 measures about 2.9-3mm across the threads; pitch 0.5mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e on a flat head screw, measure from the \u003cem\u003etop of the head\u003c\/em\u003e to the tip: 8mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e cone-shaped, 5.6mm across, sits flush in a 90° countersink. If your original is flat underneath (pan or wafer head), this is not the right screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e Phillips PH1.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Type:\u003c\/strong\u003e Machine Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M3 x 0.5mm (metric coarse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8mm overall (includes the head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head, Countersunk 90°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 5.6mm max; head height 1.65mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Style:\u003c\/strong\u003e Phillips PH1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e DIN 965 (ISO 7046 equivalent)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel, property class 4.8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Clear zinc plated (Cr3+, RoHS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 100 Screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Please verify your thread size before ordering. M3 screws are not interchangeable with other M sizes.\u003c\/p\u003e\n\n\u003c!-- tsw-fits:start --\u003e\u003cdiv class=\"tsw-fits\"\u003e\n\u003ch3\u003eFits \/ replaces flat head screws in\u003c\/h3\u003e\n\u003cp\u003eEach row comes from a parts list, manual or maker's spec that calls for an \u003cb\u003eM3 x 8mm countersunk (flat head)\u003c\/b\u003e screw. Where the original has a hex or Torx drive, this Phillips screw has the same thread, length and head shape.\u003c\/p\u003e\n\u003ctable class=\"tsw-fits-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDevice \/ model\u003c\/th\u003e\n\u003cth\u003eWhere the screw goes\u003c\/th\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraxxas T-Maxx, E-Maxx, Revo and Jato RC trucks\u003c\/td\u003e\n\u003ctd\u003e3x8mm countersunk machine screws (Traxxas 2550; the original is hex drive)\u003c\/td\u003e\n\u003ctd\u003etuah.wrekd.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoron StealthChanger toolhead backplates\u003c\/td\u003e\n\u003ctd\u003em3x6 or m3x8 flat head countersunk screws that must be magnetic (no stainless) for Tap; these zinc-plated steel screws are magnetic\u003c\/td\u003e\n\u003ctd\u003egithub.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen red dot sights on adapter plates (airsoft and optics)\u003c\/td\u003e\n\u003ctd\u003eM3 flat head screws in the M3x7.5 to M3x10 range fix the sight to the mount; M3x8 is a common length\u003c\/td\u003e\n\u003ctd\u003eredwolfairsoft.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eThe same M3 x 8mm size is also called out in (check the head first)\u003c\/h4\u003e\n\u003cp\u003eThese service documents list an M3 x 8mm screw, but the original head may be a pan, wafer or cap head. A flat head only sits flush in a countersunk (cone-shaped) hole, so compare with the screw you removed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHP LaserJet 9000 \/ 9040 \/ 9050 printers: parts list: Screw, M3 by 8 (XA9-1200-000CN) (qcs1.com)\u003c\/li\u003e\n\u003cli\u003eBixolon SRP-B300II receipt printer: cover, frame and mechanism screws M3x4 \/ M3x6 \/ M3x8 (bixolon.com)\u003c\/li\u003e\n\u003cli\u003eTSC MH241 \/ MH341 \/ MH641 label printers: parts list machine screws M3*5, M3*6, M3*8 (tsc-drucker.com)\u003c\/li\u003e\n\u003cli\u003eVivotek IT9389-H dome camera: camera-to-bracket screws on the AM-21M mount (vivotek.com)\u003c\/li\u003e\n\u003cli\u003eVerifone P400 PIN pad: front mounting plate screws (onlinehelp.ncrvoyix.com)\u003c\/li\u003e\n\u003cli\u003eStar Micronics mPOP under-counter mount CM-POP1: mount frame to the mPOP (starasia.com)\u003c\/li\u003e\n\u003cli\u003eQualGear QG-KIT-VA-3IN-B projector mount kit: universal plate hardware (media.digikey.com)\u003c\/li\u003e\n\u003cli\u003eHammond 1591 \/ 1555 enclosures: M3-0.5 x 8mm panel and PCB mounting screw (Hammond 1591MM100) (media.ic-find.com)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat does an M3 x 8mm flat head screw fit?\u003c\/h4\u003e\n\u003cp\u003eSources that call for an M3 x 8mm countersunk (flat head) screw include: Traxxas T-Maxx, E-Maxx, Revo and Jato RC trucks; Voron StealthChanger toolhead backplates; Open red dot sights on adapter plates (airsoft and optics). Measure your original screw first: M3 thread, 8mm long measured from the top of the head, cone-shaped head.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does an M3 x 8mm flat head screw fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Sources that call for an M3 x 8mm countersunk (flat head) screw include: Traxxas T-Maxx, E-Maxx, Revo and Jato RC trucks; Voron StealthChanger toolhead backplates; Open red dot sights on adapter plates (airsoft and optics). Measure your original screw first: M3 thread, 8mm long measured from the top of the head, cone-shaped head.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e\u003c!-- tsw-fits:end --\u003e","brand":"TechSpareWarehouse","offers":[{"title":"Default Title","offer_id":67693133561930,"sku":"M3X8-PFH-CS-SLV-100PK","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/7351\/0218\/files\/m3x8-photo_4f74489b-fe45-433c-891d-3c4eb142ff4b.jpg?v=1792031818"}],"url":"https:\/\/techsparewarehouse.com\/collections\/m3-x-8mm-screws.oembed","provider":"Techsparewarehouse","version":"1.0","type":"link"}