Acer TravelMate 3010 screw size
M1.6 / M2 / M2.5 / M3 · 2.5 to 4 mm long
Acer TravelMate 3010 takes M1.6, M2, M2.5 and M3 metric screws in lengths from 2.5 to 4 mm.
There are 5 separate fitment records for it, including memory (qty 1) (M1.6), memory (qty 4) (M2) and memory (qty 3) (M2), plus 2 more in the table below.
5 of the 5 records are marked confirmed, drawn from 1 source (tim.id.au).
M1.6 means a 1.6 mm nominal diameter with a 0.35 mm thread pitch. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent.
Acer TravelMate 3010 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.6 | 3 mm | 0.35 mm | not stated | not stated | Memory (qty 1) | Confirmed |
| M2 | 2.5 mm | 0.4 mm | not stated | not stated | Memory (qty 4) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Memory (qty 3) | Confirmed |
| M2.5 | 3 mm | 0.45 mm | not stated | not stated | Memory (qty 3) | Confirmed |
| M3 | 3.8 mm | 0.5 mm | not stated | not stated | Memory (qty 1) | Confirmed |
Fitment records and sources
Memory (qty 1)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Memory (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Memory (qty 3)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Memory (qty 3)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Memory (qty 1)
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M1.6 screw measures about 1.6 mm with calipers (usually a hair under). This device also uses M2 / M2.5 / M3, so measure each screw rather than assuming they match.
- Pitch: 0.35 mm from one thread crest to the next (28.57 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2.5–4 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M1.6 heads take PH00 for Phillips and T4–T5 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.6 is about 12-20 N·cm into metal threads and 6-10 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.6 / M2 / M2.5 / M3
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- M2.5 pitch is 0.45mm vs M3's 0.5mm and M2's 0.4mm — forcing the wrong one strips plastic bosses instantly.
- M3 (3.0mm, 0.5mm pitch) is not #6-32 UNC (~3.5mm) — they look identical and cross-thread, the single most common PC-building mistake.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M1.6 x 3mm Screws Compatible with Dell XPS 13 9340 Keyboard 10-Pack Black
$4.99 -
M1.6 x 3mm Screws for Dell XPS 13 9340 System Board Replacement 10-Pack Black
$4.99
-
M2 x 2.5mm Screws for Dell XPS 14 9440 M.2 SSD Drive – 10-Pack Black
$4.99 -
M2 x 2.5mm Screws for ASUS ROG Strix G17 G713 SSD WiFi Touchpad 10-Pack Black
$4.99
-
M2 x 4mm Phillips Wafer Head Machine Screws Black 50-Pack Laptop SSD Repair
$4.49 each · min. 2
-
M2 x 4mm Screws for Dell Latitude 5530 SSD Type-C Bracket 10-Pack Black
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Acer TravelMate 3010, closest length match first.
- Lenovo IdeaPad Y480 also M2 × 4 mm
- Dell 14 Plus 2-in-1 DB04250 also M2 × 2.5 mm
- Lenovo ThinkPad T410si also M2 × 4 mm
- Lenovo V17 Gen 3 also M2 × 2.5 mm
- Lenovo Flex 3-1470 (HSW) also M2 × 2.5 mm
- HP Pavilion dv2000 also M2 × 4 mm
- Lenovo V14 Gen 5 i also M2 × 4 mm
- HP Chromebook x360 11 G3 EE also M2.5 × 3 mm
Questions about Acer TravelMate 3010 screws
- What size screw does Acer TravelMate 3010 use?
- M1.6 × 3 mm for memory (qty 1); M2 × 2.5 mm for memory (qty 4); M2 × 4 mm for memory (qty 3); M2.5 × 3 mm for memory (qty 3); M3 × 3.8 mm for memory (qty 1).
- How long are the screws in Acer TravelMate 3010?
- The records range from 2.5 to 4 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.6 screw?
- 0.35 mm (coarse), which is the standard pitch for M1.6 machine screws; a 0.2 mm fine pitch exists but is uncommon. The tap drill is 1.25 mm and the normal clearance hole is 1.8 mm.
- What screwdriver do I need for Acer TravelMate 3010?
- The sources do not name the drive. For M1.6, Phillips heads normally take PH00 and Torx heads T4–T5; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M1.6?
- No. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent. Use a true M1.6 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Acer TravelMate 3010?
- TechSpareWarehouse (our own store) lists M1.6 x 3mm, M2 x 2.5mm and M2 x 4mm, which match lengths in the records above.