A guide to turntable cartridge mounting screws: the half-inch mount standard, M2.5 and 2-56 threads, choosing a length for your cartridge and headshell, and how to fit them.
TechSpareWarehouse |
RC car screw sizes explained by scale, how to measure a missing screw, where flat heads and button heads go on a chassis, and how to avoid stripping plastic parts.
TechSpareWarehouse |
A guide to drone screw sizes: what M1.2, M1.4, M2 and M3 screws do on FPV and mini drones, how to choose screw length, and the motor-screw mistake to avoid.
TechSpareWarehouse |
A practical chart matching precision Phillips, Torx and pentalobe bits to M1.2 to M3 electronics screws, plus how to avoid stripping small screw heads.
TechSpareWarehouse |
A guide to laptop key hinge types: how scissor, butterfly and stabilizer mechanisms differ, how to identify yours, and how to fit a keycap and hinge clip without damage.
TechSpareWarehouse |
6-32 UNC and M3 screws compared: the measurements that tell them apart, which PC parts use which, and how to sort a mixed bag without damaging threads.
TechSpareWarehouse |
Countersunk (flat head) and pan head screws compared for electronics repair: how to identify them, how length is measured on each, and why swapping one for the other causes problems.
TechSpareWarehouse |
Raspberry Pi boards use M2.5 screws. The Pi 5's mounting holes are 2.7mm on a 58 x 49mm rectangle, and cases and PoE HATs use M2.5 x 8mm. Sizes, lengths...
TechSpareWarehouse |
The number is the thread diameter in mm: M2 = 2.0mm, M2.5 = 2.5mm, M3 = 3.0mm, with 0.4, 0.45 and 0.5mm pitch. How to tell them apart, measure length,...
TechSpareWarehouse |
Fit standoffs only where your motherboard has holes, thread them by hand, and snug them gently. For M.2 SSDs, move the standoff to the hole for your drive length and...
TechSpareWarehouse |
2.5" hard drives and SATA SSDs use M3 screws, usually M3 x 3mm or M3 x 4mm in laptop caddies. 3.5" desktop drives use 6-32. Exact sizes by device, how...
TechSpareWarehouse |
Order a single replacement laptop key the first time: find your model number, match the listing, choose Type 1 or Type 2 retainer, and pick the key.
TechSpareWarehouse |
Bottom cover screw sizes for Dell XPS, Inspiron, ASUS ROG Strix, Acer Nitro 5, HP Fortis and MacBook Pro, plus how to identify M2 vs M2.5 and pick singles, packs...
TechSpareWarehouse |
