Acer TravelMate 4100 screw size
M2.5 · 6 mm long
The screws used on Acer TravelMate 4100 are M2.5, 6 mm long.
There are 4 separate fitment records for it, including I/O bezel (qty 2) (M2.5), base cover (qty 14) (M2.5) and hard drive (qty 1) (M2.5), plus 1 more in the table below.
4 of the 4 records are marked confirmed, drawn from 1 source (tim.id.au).
An M2.5 screw is 2.5 mm in diameter with a 0.45 mm pitch, tapped with a 2.05 mm drill; imperial look-alike: #3-48 / #4-40 (2.51 / 2.84 mm) — #4-40 is the common US stand-in and it will NOT thread in.
Acer TravelMate 4100 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2.5 | 6 mm | 0.45 mm | not stated | not stated | I/O bezel (qty 2) | Confirmed |
| M2.5 | 6 mm | 0.45 mm | not stated | not stated | Base cover (qty 14) | Confirmed |
| M2.5 | 6 mm | 0.45 mm | not stated | not stated | Hard drive (qty 1) | Confirmed |
| M2.5 | 6 mm | 0.45 mm | not stated | not stated | Heat sink (qty 1) | Confirmed |
Fitment records and sources
I/O bezel (qty 2)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Base cover (qty 14)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Hard drive (qty 1)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Heat sink (qty 1)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
- Diameter: across the threads an M2.5 screw measures about 2.5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.45 mm from one thread crest to the next (22.22 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 6 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M2.5 heads take PH1 for Phillips and T8 for Torx, and a 2 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2.5 is about 45-70 N·cm into metal threads and 20-35 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2.5
- M2.5 pitch is 0.45mm vs M3's 0.5mm and M2's 0.4mm — forcing the wrong one strips plastic bosses instantly.
- M2.5 and M3 look the same to the naked eye — you need calipers on the shank to tell them apart.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2.5 x 6mm Laptop Motherboard Replacement Screws Wafer Head 10-Pack Black
$4.99 -
10x M2.5 x 6mm Phillips Screws for Lenovo ThinkPad X131e Chromebook LCD Hinge
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
-
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Acer TravelMate 4100, closest length match first.
- HP ProBook 4320s also M2.5 × 6 mm
- Dell Latitude 7390 also M2.5 × 6 mm
- Acer Aspire 5930Z also M2.5 × 6 mm
- HP 240 G5 also M2.5 × 6 mm
- Lenovo E50-80 also M2.5 × 6 mm
- HP ProBook 6570b also M2.5 × 6 mm
- HP 240 G4 also M2.5 × 6 mm
- Dell Inspiron 5160 also M2.5 × 6 mm
Questions about Acer TravelMate 4100 screws
- What size screw does Acer TravelMate 4100 use?
- M2.5 × 6 mm for I/O bezel (qty 2); M2.5 × 6 mm for base cover (qty 14); M2.5 × 6 mm for hard drive (qty 1); M2.5 × 6 mm for heat sink (qty 1).
- How long are the screws in Acer TravelMate 4100?
- The record gives 6 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M2.5 screw?
- 0.45 mm (coarse), which is the standard pitch for M2.5 machine screws; a 0.35 mm fine pitch exists but is uncommon. The tap drill is 2.05 mm and the normal clearance hole is 2.9 mm.
- What screwdriver do I need for Acer TravelMate 4100?
- The sources do not name the drive. For M2.5, Phillips heads normally take PH1 and Torx heads T8; socket heads take a 2 mm hex key.
- Can I use an imperial screw instead of M2.5?
- No. Imperial look-alike: #3-48 / #4-40 (2.51 / 2.84 mm) — #4-40 is the common US stand-in and it will NOT thread in. Use a true M2.5 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Acer TravelMate 4100?
- TechSpareWarehouse (our own store) lists M2.5 x 6mm, which matches the length in the records above.