Acer TravelMate 5530 screw size
M2 / M2.5 / M3 · 3 to 8 mm long
If you are replacing a screw on Acer TravelMate 5530, the thread is M2, M2.5 and M3 in lengths from 3 to 8 mm.
There are 13 separate fitment records for it, including keyboard (qty 2, silver) (M2), power button (qty 2, silver) (M2) and speaker (qty 2, silver) (M2), plus 10 more in the table below.
13 of the 13 records are marked confirmed, drawn from 1 source (tim.id.au).
An M2 screw is 2 mm in diameter with a 0.4 mm pitch, tapped with a 1.6 mm drill; imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
Acer TravelMate 5530 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 3 mm | 0.4 mm | not stated | not stated | Keyboard (qty 2, silver) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Power button (qty 2, silver) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Speaker (qty 2, silver) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Display (qty 8, silver) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Heat sink (qty 2, silver) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | System board (qty 3, silver) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Unspecified (qty 2, silver) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Wireless card (qty 2, silver) | Confirmed |
| M2 | 8 mm | 0.4 mm | not stated | not stated | Display (qty 2, black)black finish | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | Display (qty 14, black)black finish | Confirmed |
| M2.5 | 6 mm | 0.45 mm | not stated | not stated | Display (qty 6, black)black finish | Confirmed |
| M2.5 | 6 mm | 0.45 mm | not stated | not stated | Display bezel (qty 4, black)black finish | Confirmed |
| M3 | 4 mm | 0.5 mm | not stated | not stated | Hard drive (qty 2, silver) | Confirmed |
Fitment records and sources
Keyboard (qty 2, silver)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Power button (qty 2, silver)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Speaker (qty 2, silver)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display (qty 8, silver)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Heat sink (qty 2, silver)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 3, silver)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 2, silver)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 2, silver)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display (qty 2, black)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display (qty 14, black)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display (qty 6, black)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display bezel (qty 4, black)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Hard drive (qty 2, silver)
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
How to check the screw before you buy
- Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). This device also uses M2.5 / M3, so measure each screw rather than assuming they match.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 3–8 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2 / M2.5 / M3
- M.2 SSD mounting screws (M2 x 3mm) are frequently mislabeled generically as 'M.2 screws' which can be confused with the M2 metric thread designation — they do coincide numerically here but are conceptually distinct (M.2 = card format, M2 = thread size).
- M2.5 and M3 look the same to the naked eye — you need calipers on the shank to tell them apart.
- LED strip clips strip easily — M3x12 into thin plastic should be hand-driven, never with a power driver.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
M2 x 4mm Phillips Wafer Head Machine Screws Black 50-Pack Laptop SSD Repair
$4.49 each · min. 2
-
M2 x 4mm Screws for Dell Latitude 5530 SSD Type-C Bracket 10-Pack Black
$4.99
-
M2 x 8mm Phillips Wafer Head Screw for Dell XPS 15 9560 Laptop Repair - Pack of 100 Black
$7.99 -
10x M2 x 8mm Phillips Screws for HP Fortis 14 G11 Chromebook Bottom Cover
$4.99 -
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Acer TravelMate 5530, closest length match first.
- Lenovo ThinkPad L410 also M2 × 3 mm
- Acer TravelMate 7720 also M2 × 3 mm
- Lenovo ideapad 110-17ACL also M2 × 3 mm
- Dell Latitude 7400 2-in-1 also M2 × 3 mm
- HP Spectre x360 13.5 inch 2-in-1 also M2 × 3 mm
- HP ProBook 430 G3 also M2 × 3 mm
- HP EliteBook 848 G4 also M2 × 3 mm
- Lenovo ThinkPad T60/p also M2 × 3 mm
Questions about Acer TravelMate 5530 screws
- What size screw does Acer TravelMate 5530 use?
- M2 × 3 mm for keyboard (qty 2, silver); M2 × 3 mm for power button (qty 2, silver); M2 × 3 mm for speaker (qty 2, silver); M2 × 4 mm for display (qty 8, silver); M2 × 4 mm for heat sink (qty 2, silver); M2 × 4 mm for system board (qty 3, silver); M2 × 4 mm for unspecified (qty 2, silver); M2 × 4 mm for wireless card (qty 2, silver); M2 × 8 mm for display (qty 2, black); M2.5 × 5 mm for display (qty 14, black); M2.5 × 6 mm for display (qty 6, black); M2.5 × 6 mm for display bezel (qty 4, black); M3 × 4 mm for hard drive (qty 2, silver).
- How long are the screws in Acer TravelMate 5530?
- The records range from 3 to 8 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for Acer TravelMate 5530?
- The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Acer TravelMate 5530?
- TechSpareWarehouse (our own store) lists M2 x 3mm, M2 x 4mm and M2 x 8mm, which match lengths in the records above.