ASUS ZenBook 13 UX325UA screw size
M2 · 2 to 7 mm long
Our records put ASUS ZenBook 13 UX325UA on M2 screws in lengths from 2 to 7 mm.
There are 4 separate fitment records for it, including bottom case screws (M2), battery / internal bracket screws (M2) and motherboard and module screws (M2), plus 1 more in the table below.
4 of the 4 records are marked confirmed, drawn from 1 source (ASUS ZenBook 13 UX325UA Repair Manual).
An M2 screw is 2 mm in diameter with a 0.4 mm pitch, tapped with a 1.6 mm drill; imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
ASUS ZenBook 13 UX325UA screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 4 mm | 0.4 mm | not stated | not stated | bottom case screws | Confirmed |
| M2 | 7 mm | 0.4 mm | not stated | not stated | battery / internal bracket screws | Confirmed |
| M2 | 3.7 mm | 0.4 mm | not stated | not stated | motherboard and module screws | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | FPC cable bracket screws | Confirmed |
Fitment records and sources
bottom case screws
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
battery / internal bracket screws
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
motherboard and module screws
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
FPC cable bracket screws
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2–7 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2
- ASUS ROG Ally screw sizes circulating online (M2x16, M2x10) come from a community Q&A, not an ASUS manual — measure before ordering.
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2 x 4mm Phillips Wafer Head Machine Screws Black 50-Pack Laptop SSD Repair
$4.49 each · min. 2
-
M2 x 4mm Screws for Dell Latitude 5530 SSD Type-C Bracket 10-Pack Black
$4.99
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
-
Dell Latitude 5530 Replacement Screws Sold Individually – M2 x 3mm, M2 x 4mm, M2.5 x 5mm Phillips Wafer Head, Black
$0.10Choose size -
HP EliteBook 840 G8 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 4mm, M2.5 x 4mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with ASUS ZenBook 13 UX325UA, closest length match first.
- Lenovo IdeaPad Y580 also M2 × 4 mm
- Lenovo E49 also M2 × 2 mm
- Lenovo YOGA 500-14ISK also M2 × 4 mm
- Dell Latitude 3320 also M2 × 2 mm
- Dell Inspiron 14 5490 also M2 × 2 mm
- HP Compaq nx9420 also M2 × 4 mm
- Dell Alienware x15 R2 also M2 × 4 mm
- ASUS ROG Zephyrus M16 (GU603) also M2 × 4 mm
Questions about ASUS ZenBook 13 UX325UA screws
- What size screw does ASUS ZenBook 13 UX325UA use?
- M2 × 4 mm for bottom case screws; M2 × 7 mm for battery / internal bracket screws; M2 × 3.7 mm for motherboard and module screws; M2 × 2 mm for FPC cable bracket screws.
- How long are the screws in ASUS ZenBook 13 UX325UA?
- The records range from 2 to 7 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for ASUS ZenBook 13 UX325UA?
- The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for ASUS ZenBook 13 UX325UA?
- TechSpareWarehouse (our own store) lists M2 x 4mm and M2 x 2mm, which match lengths in the records above.