Berkel 330M Slicer carriage/guard fastener screw size
M5 · 10 mm long
Berkel 330M Slicer carriage/guard fastener takes M5 metric screws, 10 mm long.
It is listed for stainless steel screw, appears in multiple assemblies of the 330M parts catalog.
This entry is marked confirmed and comes from berkelequipment.com.
An M5 screw is 5 mm in diameter with a 0.8 mm pitch, tapped with a 4.2 mm drill; imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing.
Berkel 330M Slicer carriage/guard fastener screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M5 | 10 mm | 0.8 mm | not stated | not stated | Stainless steel screw, appears in multiple assemblies of the 330M parts catalogstainless | Confirmed |
Fitment records and sources
Stainless steel screw, appears in multiple assemblies of the 330M parts catalog
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
How to check the screw before you buy
- Where the manufacturer publishes a torque value, use a torque driver rather than feel.
- Diameter: across the threads an M5 screw measures about 5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.8 mm from one thread crest to the next (12.5 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 10 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M5 heads take PH2 for Phillips and T25 for Torx, and a 4 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M5 is about 4.0-6.0 N·m into metal threads and 1.5-2.5 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M5
- Espresso/coffee-equipment M5 and M6 socket-head screws (DIN 7984/UNI 9327) are cross-brand standard fasteners shared across CMA, Astoria, and La Cimbali brewing-group hardware, so a single screw often services multiple manufacturers' machines.
- Wheelchair and mobility OEM screws specify an exact standard and strength class (ISO 7045 CL4.8, ISO 4762 CL12.9). Matching only the thread size can cause a failure under load.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M5 x 10mm Black Wafer Head Bike Fender & Rack Screws for Tern MTR Fenders, Blackburn EX-1 Rack, ENVO Stax & René Herse Fender Set – 10-Pack Replacement
$5.99Choose size -
M5 x 10mm Black Wafer Head Folding Mechanism Screws for GOTRAX GXL V2, Rival, XR Ultra & XR Elite – 10-Pack Replacement
$5.99Choose size
More in Vehicles, Marine & Mobility
ABB Terra DC Wallbox (3-phase UL)Adjustable Picatinny rail threaded insertAdult e-scootersAftermarket car stereo cageAirgun scope/rail mount replacement screwsAlpine Head UnitsAnalogis phono cartridge screw setArduino UNO / full-size Arduino boardsAudio MusiKraft cartridge mounting screw kitAudio MusiKraft cartridge/headshell mounting kitBar-end plug or bar-end shifterBicycle 6-bolt disc brake rotors (Shimano/SRAM/Magura)
Browse all 171 in Vehicles, Marine & Mobility →The same screw also fits
Devices whose records share a thread with Berkel 330M Slicer carriage/guard fastener, closest length match first.
- Bicycle bottle cage boss also M5 × 10 mm
- Car door trim panel also M5 × 10 mm
- Kick scooter clamp and folding hardware also M5 × 10 mm
- Six-bolt disc brake rotor also M5 × 10 mm
- SPD-SL / Look 3-hole cycling cleats also M5 × 10 mm
- EVBox Troniq Compact Modular also M5 × 10 mm
- Aftermarket car stereo cage also M5 × 10 mm
- Xiaomi M365 / Ninebot deck cover also M5 × 10 mm
Questions about Berkel 330M Slicer carriage/guard fastener screws
- What size screw does Berkel 330M Slicer carriage/guard fastener use?
- M5 × 10 mm for stainless steel screw, appears in multiple assemblies of the 330M parts catalog.
- How long are the screws in Berkel 330M Slicer carriage/guard fastener?
- The record gives 10 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M5 screw?
- 0.8 mm (coarse), which is the standard pitch for M5 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 4.2 mm and the normal clearance hole is 5.5 mm.
- What screwdriver do I need for Berkel 330M Slicer carriage/guard fastener?
- The sources do not name the drive. For M5, Phillips heads normally take PH2 and Torx heads T25; socket heads take a 4 mm hex key.
- Can I use an imperial screw instead of M5?
- No. Imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing. Use a true M5 screw so it does not cross-thread or strip the hole.