D-series audio rack panel screw kit screw size
M2.5 · 8 mm long
Our records put D-series audio rack panel screw kit on M2.5 screws, 8 mm long.
Where it is used: M2.5x8mm stainless panel screws and nuts sold for D-series audio rack and server panels.
This entry is marked likely and comes from retromagazine.net.
An M2.5 screw is 2.5 mm in diameter with a 0.45 mm pitch, tapped with a 2.05 mm drill; imperial look-alike: #3-48 / #4-40 (2.51 / 2.84 mm) — #4-40 is the common US stand-in and it will NOT thread in.
D-series audio rack panel screw kit screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2.5 | 8 mm | 0.45 mm | not stated | not stated | M2.5x8mm stainless panel screws and nuts sold for D-series audio rack and server panelsstainless | Likely |
Fitment records and sources
M2.5x8mm stainless panel screws and nuts sold for D-series audio rack and server panels
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- Rack and enclosure hardware mixes metric and imperial (#8-32, #10-32, #6-32), so confirm the thread before forcing a screw.
- Diameter: across the threads an M2.5 screw measures about 2.5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.45 mm from one thread crest to the next (22.22 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 8 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M2.5 heads take PH1 for Phillips and T8 for Torx, and a 2 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2.5 is about 45-70 N·cm into metal threads and 20-35 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2.5
- M2.5 pitch is 0.45mm vs M3's 0.5mm and M2's 0.4mm — forcing the wrong one strips plastic bosses instantly.
- M2.5 and M3 look the same to the naked eye — you need calipers on the shank to tell them apart.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2.5 x 8mm Screws for Retevis RT27 Radio Belt Clip 10-Pack Black Phillips
$4.99 -
M2.5 x 8mm Screws for Raspberry Pi 5 Case and PoE HAT 10-Pack Black
$4.99 -
25x M2.5 x 8mm Phillips Screws for Acer Nitro 5 LCD Hinge Assembly
$5.99 -
M2.5 x 8mm Black Wafer Head Screws for Lenovo ThinkPad X131e Chromebook Palmrest Replacement – 10-Pack Black
$4.99Choose size
More in Electronics, Racks & Enclosures
19-inch rack cage nut (light equipment)19-inch rack cage nut (metric square-hole rails)19-inch rack cage nut (mid size)19-inch rack cage nut and panel screw19-inch rack network and AV gear19-inch rack-mount audio/AV equipment19-inch server racks19in / 10in server rack cage nut and screw kit19in equipment rack (Kendall Howard cage nuts)19in rack cage nuts (alternate metric)19in rack cage nuts (metric)1U rack-mount PDU (American Denki)
Browse all 357 in Electronics, Racks & Enclosures →The same screw also fits
Devices whose records share a thread with D-series audio rack panel screw kit, closest length match first.
- Eurorack module-to-rail mounting screws (Vector/SynthRacks rails) also M2.5 × 8 mm
- Wurth Elektronik WA-SSTIE steel spacer stud also M2.5 × 8 mm
- Wurth Elektronik WA-SPAIE plastic spacer stud also M2.5 × 8 mm
- PW-Sat2 CubeSat secondary structure and panels also M2.5 × 8 mm
- Eurorack module/rail mounting screw also M2.5 × 8 mm
- GE Healthcare Maternal Infant Care service part 6600-0715-403 also M2.5 × 8 mm
- NVIDIA Jetson Nano carrier board also M2.5 × 8 mm
- Dell Latitude D520 also M2.5 × 8 mm
Questions about D-series audio rack panel screw kit screws
- What size screw does D-series audio rack panel screw kit use?
- M2.5 × 8 mm for M2.5x8mm stainless panel screws and nuts sold for D-series audio rack and server panels.
- How long are the screws in D-series audio rack panel screw kit?
- The record gives 8 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M2.5 screw?
- 0.45 mm (coarse), which is the standard pitch for M2.5 machine screws; a 0.35 mm fine pitch exists but is uncommon. The tap drill is 2.05 mm and the normal clearance hole is 2.9 mm.
- What screwdriver do I need for D-series audio rack panel screw kit?
- The sources do not name the drive. For M2.5, Phillips heads normally take PH1 and Torx heads T8; socket heads take a 2 mm hex key.
- Can I use an imperial screw instead of M2.5?
- No. Imperial look-alike: #3-48 / #4-40 (2.51 / 2.84 mm) — #4-40 is the common US stand-in and it will NOT thread in. Use a true M2.5 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for D-series audio rack panel screw kit?
- TechSpareWarehouse (our own store) lists M2.5 x 8mm, which matches the length in the records above.