Dell 16 Plus DB16250 screw size
M1.6 / M2 / M2.5 · 1.5 to 4 mm long
The screws used on Dell 16 Plus DB16250 are M1.6, M2 and M2.5 in lengths from 1.5 to 4 mm.
There are 13 separate fitment records for it, including touchpad (qty 4) (M1.6), SSD (qty 1) (M2) and system board (qty 2) (M2), plus 10 more in the table below.
13 of the 13 records are marked confirmed, drawn from 1 source (dell.com).
For reference, M1.6 is 1.6 mm across the threads at 0.35 mm pitch. The imperial size people confuse it with: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent.
Dell 16 Plus DB16250 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.6 | 1.5 mm | 0.35 mm | not stated | not stated | Touchpad (qty 4) | Confirmed |
| M2 | 1.8 mm | 0.4 mm | not stated | not stated | SSD (qty 1) | Confirmed |
| M2 | 1.8 mm | 0.4 mm | not stated | not stated | System board (qty 2) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | I/O board (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Battery (qty 5) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Bracket (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Fan (qty 2) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Power button (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Touchpad (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Wireless card (qty 1) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Base cover (qty 7) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | USB-C board (qty 2) | Confirmed |
| M2.5 | 4 mm | 0.45 mm | not stated | not stated | Display (qty 6) | Confirmed |
Fitment records and sources
Touchpad (qty 4)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
SSD (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
I/O board (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Battery (qty 5)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Bracket (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Fan (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Power button (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Touchpad (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Base cover (qty 7)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
USB-C board (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display (qty 6)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
- Diameter: across the threads an M1.6 screw measures about 1.6 mm with calipers (usually a hair under). This device also uses M2 / M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.35 mm from one thread crest to the next (28.57 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 1.5–4 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M1.6 heads take PH00 for Phillips and T4–T5 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.6 is about 12-20 N·cm into metal threads and 6-10 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.6 / M2 / M2.5
- M1.6 is the most common laptop-internal micro screw after M2 — Dell XPS keyboards specifically call out M1.6 x 1.5mm, and generic M2 substitutes strip the bracket.
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
M2 x 4mm Phillips Wafer Head Machine Screws Black 50-Pack Laptop SSD Repair
$4.49 each · min. 2
-
M2 x 4mm Screws for Dell Latitude 5530 SSD Type-C Bracket 10-Pack Black
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Dell 16 Plus DB16250, closest length match first.
- Dell Latitude 7310 2-in-1 also M2.5 × 4 mm
- Lenovo 500w Gen 3 also M2 × 3 mm
- Lenovo Yoga 300 also M2 × 3 mm
- Lenovo ThinkPad T40p also M2 × 3 mm
- HP EliteBook 850 G5 also M2 × 3 mm
- Lenovo ideapad 510S-13IKB also M2 × 3 mm
- HP Pavilion 14 inch 14-ec0000 also M2 × 3 mm
- Lenovo ThinkPad E14 Gen 6 also M2 × 3 mm
Questions about Dell 16 Plus DB16250 screws
- What size screw does Dell 16 Plus DB16250 use?
- M1.6 × 1.5 mm for touchpad (qty 4); M2 × 1.8 mm for SSD (qty 1); M2 × 1.8 mm for system board (qty 2); M2 × 3 mm for I/O board (qty 1); M2 × 3 mm for battery (qty 5); M2 × 3 mm for bracket (qty 1); M2 × 3 mm for fan (qty 2); M2 × 3 mm for power button (qty 1); M2 × 3 mm for touchpad (qty 4); M2 × 3 mm for wireless card (qty 1); M2 × 4 mm for base cover (qty 7); M2 × 4 mm for USB-C board (qty 2); M2.5 × 4 mm for display (qty 6).
- How long are the screws in Dell 16 Plus DB16250?
- The records range from 1.5 to 4 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.6 screw?
- 0.35 mm (coarse), which is the standard pitch for M1.6 machine screws; a 0.2 mm fine pitch exists but is uncommon. The tap drill is 1.25 mm and the normal clearance hole is 1.8 mm.
- What screwdriver do I need for Dell 16 Plus DB16250?
- The sources do not name the drive. For M1.6, Phillips heads normally take PH00 and Torx heads T4–T5; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M1.6?
- No. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent. Use a true M1.6 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Dell 16 Plus DB16250?
- TechSpareWarehouse (our own store) lists M2 x 2mm, M2 x 3mm and M2 x 4mm, which match lengths in the records above.