Dell Inspiron 15 7572 screw size
M2 / M2.5 / M3 · 2 to 5 mm long
If you are replacing a screw on Dell Inspiron 15 7572, the thread is M2, M2.5 and M3 in lengths from 2 to 5 mm.
There are 16 separate fitment records for it, including touchpad (qty 4) (M2), I/O board (qty 2) (M2) and LED board (qty 1) (M2), plus 13 more in the table below.
16 of the 16 records are marked confirmed, drawn from 1 source (dl.dell.com).
An M2 screw is 2 mm in diameter with a 0.4 mm pitch, tapped with a 1.6 mm drill; imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
Dell Inspiron 15 7572 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 2 mm | 0.4 mm | not stated | not stated | Touchpad (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | I/O board (qty 2) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | LED board (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Battery (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Bracket (qty 3) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | DC-in (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Fan (qty 2) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Hard drive (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Heat sink (qty 3) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | System board (qty 5) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Wireless card (qty 1) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | Base cover (qty 8) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | Display (qty 4) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | Hinge (qty 4) | Confirmed |
| M3 | 3 mm | 0.5 mm | not stated | not stated | Hard drive (qty 4) | Confirmed |
| M3 | 3 mm | 0.5 mm | not stated | not stated | SSD (qty 1) | Confirmed |
Fitment records and sources
Touchpad (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
I/O board (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
LED board (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Battery (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Bracket (qty 3)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
DC-in (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Fan (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Hard drive (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Heat sink (qty 3)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 5)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Base cover (qty 8)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display (qty 4)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Hinge (qty 4)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Hard drive (qty 4)
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
SSD (qty 1)
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
How to check the screw before you buy
- Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). This device also uses M2.5 / M3, so measure each screw rather than assuming they match.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2–5 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2 / M2.5 / M3
- M.2 SSD mounting screws (M2 x 3mm) are frequently mislabeled generically as 'M.2 screws' which can be confused with the M2 metric thread designation — they do coincide numerically here but are conceptually distinct (M.2 = card format, M2 = thread size).
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
- 3.5in desktop and enterprise hard drives are 6-32 UNC imperial, not M3 - only the 2.5in form factor is metric.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
M2.5 x 5mm Screws Compatible with Dell XPS 14 9440 Display Assembly 10-Pack
$4.99 -
M2.5 x 5mm Phillips Wafer Head Screw for Action Camera Protective Housing - Pack of 50 Black
$4.79 each · min. 2
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Dell Inspiron 15 7572, closest length match first.
- Lenovo ThinkPad X260 also M2 × 3 mm
- Lenovo ThinkPad S14 also M2 × 2 mm
- Dell Vostro 14 3490 also M2 × 2 mm
- HP Compaq Presario V3000 also M2 × 2 mm
- Dell Inspiron 15 3583 also M2 × 2 mm
- Acer Extensa 5230 also M2 × 3 mm
- Chromebook bottom case also M2 × 3 mm
- Lenovo ThinkPad 4 also M2 × 3 mm
Questions about Dell Inspiron 15 7572 screws
- What size screw does Dell Inspiron 15 7572 use?
- M2 × 2 mm for touchpad (qty 4); M2 × 3 mm for I/O board (qty 2); M2 × 3 mm for LED board (qty 1); M2 × 3 mm for battery (qty 4); M2 × 3 mm for bracket (qty 3); M2 × 3 mm for DC-in (qty 1); M2 × 3 mm for fan (qty 2); M2 × 3 mm for hard drive (qty 4); M2 × 3 mm for heat sink (qty 3); M2 × 3 mm for system board (qty 5); M2 × 3 mm for wireless card (qty 1); M2.5 × 5 mm for base cover (qty 8); M2.5 × 5 mm for display (qty 4); M2.5 × 5 mm for hinge (qty 4); M3 × 3 mm for hard drive (qty 4); M3 × 3 mm for SSD (qty 1).
- How long are the screws in Dell Inspiron 15 7572?
- The records range from 2 to 5 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for Dell Inspiron 15 7572?
- The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Dell Inspiron 15 7572?
- TechSpareWarehouse (our own store) lists M2 x 2mm, M2 x 3mm and M2.5 x 5mm, which match lengths in the records above.