Dell Latitude 7210 screw size
M1.6 / M2 · 1.1 to 4 mm long
The screws used on Dell Latitude 7210 are M1.6 and M2 in lengths from 1.1 to 4 mm.
There are 14 separate fitment records for it, including camera (qty 2) (M1.6), display (qty 6) (M1.6) and unspecified (qty 4) (M1.6), plus 11 more in the table below.
14 of the 14 records are marked confirmed, drawn from 1 source (dell.com).
M1.6 means a 1.6 mm nominal diameter with a 0.35 mm thread pitch. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent.
Dell Latitude 7210 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.6 | 3 mm | 0.35 mm | not stated | not stated | Camera (qty 2) | Confirmed |
| M1.6 | 3 mm | 0.35 mm | not stated | not stated | Display (qty 6) | Confirmed |
| M1.6 | 3 mm | 0.35 mm | not stated | not stated | Unspecified (qty 4) | Confirmed |
| M1.6 | 3 mm | 0.35 mm | not stated | not stated | Wireless card (qty 1) | Confirmed |
| M2 | 1.1 mm | 0.4 mm | not stated | not stated | Unspecified (qty 3) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | Bracket (qty 2) | Confirmed |
| M2 | 2.5 mm | 0.4 mm | not stated | not stated | Card reader (qty 3) | Confirmed |
| M2 | 2.5 mm | 0.4 mm | not stated | not stated | Heat sink (qty 4) | Confirmed |
| M2 | 2.5 mm | 0.4 mm | not stated | not stated | SSD (qty 1) | Confirmed |
| M2 | 2.5 mm | 0.4 mm | not stated | not stated | System board (qty 4) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | Wireless card (qty 1) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Battery (qty 4) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Fan (qty 2) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Hinge (qty 4) | Confirmed |
Fitment records and sources
Camera (qty 2)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Display (qty 6)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Unspecified (qty 4)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Wireless card (qty 1)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Unspecified (qty 3)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Bracket (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Card reader (qty 3)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Heat sink (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
SSD (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Battery (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Fan (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Hinge (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
How to check the screw before you buy
- Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
- Diameter: across the threads an M1.6 screw measures about 1.6 mm with calipers (usually a hair under). This device also uses M2, so measure each screw rather than assuming they match.
- Pitch: 0.35 mm from one thread crest to the next (28.57 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 1.1–4 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M1.6 heads take PH00 for Phillips and T4–T5 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.6 is about 12-20 N·cm into metal threads and 6-10 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.6 / M2
- M1.6 is the most common laptop-internal micro screw after M2 — Dell XPS keyboards specifically call out M1.6 x 1.5mm, and generic M2 substitutes strip the bracket.
- Headphone hinge screw sizes are usually quoted from screwdriver bit size, not an actual thread spec - measure before buying.
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- M.2 SSD mounting screws (M2 x 3mm) are frequently mislabeled generically as 'M.2 screws' which can be confused with the M2 metric thread designation — they do coincide numerically here but are conceptually distinct (M.2 = card format, M2 = thread size).
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M1.6 x 3mm Screws Compatible with Dell XPS 13 9340 Keyboard 10-Pack Black
$4.99 -
M1.6 x 3mm Screws for Dell XPS 13 9340 System Board Replacement 10-Pack Black
$4.99
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 2.5mm Screws for Dell XPS 14 9440 M.2 SSD Drive – 10-Pack Black
$4.99 -
M2 x 2.5mm Screws for ASUS ROG Strix G17 G713 SSD WiFi Touchpad 10-Pack Black
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Dell Latitude 7210, closest length match first.
- Acer TravelMate 5230 also M2 × 4 mm
- Dell Latitude 7530 also M2 × 2 mm
- LG LW70 also M2 × 3.5 mm
- HP Pavilion x360 14 also M2 × 2 mm
- Dell Vostro 15 7580 also M2 × 2 mm
- HP ProBook 450 G8 also M2 × 2 mm
- Toshiba Satellite M50 also M2 × 4 mm
- Lenovo IdeaPad S415 Touch also M2 × 2 mm
Questions about Dell Latitude 7210 screws
- What size screw does Dell Latitude 7210 use?
- M1.6 × 3 mm for camera (qty 2); M1.6 × 3 mm for display (qty 6); M1.6 × 3 mm for unspecified (qty 4); M1.6 × 3 mm for wireless card (qty 1); M2 × 1.1 mm for unspecified (qty 3); M2 × 2 mm for bracket (qty 2); M2 × 2.5 mm for card reader (qty 3); M2 × 2.5 mm for heat sink (qty 4); M2 × 2.5 mm for SSD (qty 1); M2 × 2.5 mm for system board (qty 4); M2 × 3.5 mm for wireless card (qty 1); M2 × 4 mm for battery (qty 4); M2 × 4 mm for fan (qty 2); M2 × 4 mm for hinge (qty 4).
- How long are the screws in Dell Latitude 7210?
- The records range from 1.1 to 4 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.6 screw?
- 0.35 mm (coarse), which is the standard pitch for M1.6 machine screws; a 0.2 mm fine pitch exists but is uncommon. The tap drill is 1.25 mm and the normal clearance hole is 1.8 mm.
- What screwdriver do I need for Dell Latitude 7210?
- The sources do not name the drive. For M1.6, Phillips heads normally take PH00 and Torx heads T4–T5; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M1.6?
- No. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent. Use a true M1.6 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Dell Latitude 7210?
- TechSpareWarehouse (our own store) lists M1.6 x 3mm, M2 x 2mm and M2 x 2.5mm, which match lengths in the records above.