Dell Latitude 7350 screw size
M1.2 / M2 / M2.5 · 1.5 to 5 mm long
Our records put Dell Latitude 7350 on M1.2, M2 and M2.5 screws in lengths from 1.5 to 5 mm.
There are 12 separate fitment records for it, including keyboard (qty 29) (M1.2), power button (qty 2) (M1.2) and card reader (qty 4) (M2), plus 9 more in the table below.
12 of the 12 records are marked confirmed, drawn from 1 source (dell.com).
An M1.2 screw is 1.2 mm in diameter with a 0.25 mm pitch, tapped with a 0.95 mm drill; imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute.
Dell Latitude 7350 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.2 | 1.5 mm | 0.25 mm | not stated | not stated | Keyboard (qty 29) | Confirmed |
| M1.2 | 1.5 mm | 0.25 mm | not stated | not stated | Power button (qty 2) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | Card reader (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Bracket (qty 2) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Camera (qty 2) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | SSD (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Wireless card (qty 4) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Battery (qty 4) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Fan (qty 1) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | SSD (qty 1) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | System board (qty 1) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | Hinge (qty 4) | Confirmed |
Fitment records and sources
Keyboard (qty 29)
pitch 0.25 mm · tap 0.95 mm · clearance 1.4 mm · PH000 / JIS 00 / Torx T1–T2
Power button (qty 2)
pitch 0.25 mm · tap 0.95 mm · clearance 1.4 mm · PH000 / JIS 00 / Torx T1–T2
Card reader (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Bracket (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Camera (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
SSD (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Battery (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Fan (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
SSD (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Hinge (qty 4)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M1.2 screw measures about 1.2 mm with calipers (usually a hair under). This device also uses M2 / M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.25 mm from one thread crest to the next (40 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 1.5–5 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M1.2 heads take PH000 / JIS 00 for Phillips and T1–T2 for Torx; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.2 is about 5-8 N·cm into metal threads and 3-5 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.2 / M2 / M2.5
- Framework lists both M1.2 x 3.0 silver and M1.6 x 3.0 black expansion-card screws; they look identical in the tray but are not interchangeable.
- M.2 SSD mounting screws (M2 x 3mm) are frequently mislabeled generically as 'M.2 screws' which can be confused with the M2 metric thread designation — they do coincide numerically here but are conceptually distinct (M.2 = card format, M2 = thread size).
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
M2 x 4mm Phillips Wafer Head Machine Screws Black 50-Pack Laptop SSD Repair
$4.49 each · min. 2
-
M2 x 4mm Screws for Dell Latitude 5530 SSD Type-C Bracket 10-Pack Black
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Dell Latitude 7350, closest length match first.
- Lenovo M5400 Touch Touch also M2 × 3 mm
- Lenovo ThinkPad L490 also M2 × 3 mm
- Dell Vostro 1000 also M2 × 3 mm
- Lenovo ThinkPad T420i also M2 × 3 mm
- Lenovo ThinkPad E480 also M2 × 2 mm
- Lenovo ThinkPad L13 2-in-1 Gen 5 also M2 × 2 mm
- Lenovo V15 Gen 4 also M2 × 2 mm
- Lenovo B51-30 also M2 × 2 mm
Questions about Dell Latitude 7350 screws
- What size screw does Dell Latitude 7350 use?
- M1.2 × 1.5 mm for keyboard (qty 29); M1.2 × 1.5 mm for power button (qty 2); M2 × 2 mm for card reader (qty 4); M2 × 3 mm for bracket (qty 2); M2 × 3 mm for camera (qty 2); M2 × 3 mm for SSD (qty 1); M2 × 3 mm for wireless card (qty 4); M2 × 4 mm for battery (qty 4); M2 × 4 mm for fan (qty 1); M2 × 4 mm for SSD (qty 1); M2 × 4 mm for system board (qty 1); M2.5 × 5 mm for hinge (qty 4).
- How long are the screws in Dell Latitude 7350?
- The records range from 1.5 to 5 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.2 screw?
- 0.25 mm (coarse), which is the standard pitch for M1.2 machine screws. The tap drill is 0.95 mm and the normal clearance hole is 1.4 mm.
- What screwdriver do I need for Dell Latitude 7350?
- The sources do not name the drive. For M1.2, Phillips heads normally take PH000 / JIS 00 and Torx heads T1–T2.
- Can I use an imperial screw instead of M1.2?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute. Use a true M1.2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Dell Latitude 7350?
- TechSpareWarehouse (our own store) lists M2 x 2mm, M2 x 3mm and M2 x 4mm, which match lengths in the records above.