Dell Pro 16 PC16250 screw size
M2 / M2.5 · 2 to 6 mm long
The screws used on Dell Pro 16 PC16250 are M2 and M2.5 in lengths from 2 to 6 mm.
There are 20 separate fitment records for it, including unspecified (qty 2) (M2), card reader (qty 4) (M2) and keyboard (qty 22) (M2), plus 17 more in the table below.
20 of the 20 records are marked confirmed, drawn from 1 source (dell.com).
M2 means a 2 mm nominal diameter with a 0.4 mm thread pitch. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
Dell Pro 16 PC16250 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 2 mm | 0.4 mm | not stated | not stated | Unspecified (qty 2) | Confirmed |
| M2 | 2.2 mm | 0.4 mm | not stated | not stated | Card reader (qty 4) | Confirmed |
| M2 | 2.2 mm | 0.4 mm | not stated | not stated | Keyboard (qty 22) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | I/O board (qty 3) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Battery (qty 4, captive)captive | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Fan (qty 2) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | SSD (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | System board (qty 3) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Wireless card (qty 1) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Battery (qty 1) | Confirmed |
| M2 | 5 mm | 0.4 mm | not stated | not stated | System board (qty 2) | Confirmed |
| M2 | 5 mm | 0.4 mm | not stated | not stated | USB-C board (qty 3) | Confirmed |
| M2 | 5.4 mm | 0.4 mm | not stated | not stated | Heat sink (qty 4, captive)captive | Confirmed |
| M2.5 | 2.5 mm | 0.45 mm | not stated | not stated | Display (qty 6) | Confirmed |
| M2.5 | 3.5 mm | 0.45 mm | not stated | not stated | Display (qty 4) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | I/O board (qty 3) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | DC-in (qty 3) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | Display (qty 6) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | System board (qty 3) | Confirmed |
| M2.5 | 6 mm | 0.45 mm | not stated | not stated | Base cover (qty 9, captive)captive | Confirmed |
Fitment records and sources
Unspecified (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Card reader (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Keyboard (qty 22)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
I/O board (qty 3)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Battery (qty 4, captive)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Fan (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
SSD (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 3)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Battery (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
USB-C board (qty 3)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Heat sink (qty 4, captive)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display (qty 6)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display (qty 4)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
I/O board (qty 3)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
DC-in (qty 3)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display (qty 6)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
System board (qty 3)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Base cover (qty 9, captive)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). This device also uses M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2–6 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2 / M2.5
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- M.2 SSD mounting screws (M2 x 3mm) are frequently mislabeled generically as 'M.2 screws' which can be confused with the M2 metric thread designation — they do coincide numerically here but are conceptually distinct (M.2 = card format, M2 = thread size).
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
- M2.5 pitch is 0.45mm vs M3's 0.5mm and M2's 0.4mm — forcing the wrong one strips plastic bosses instantly.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
M2 x 4mm Phillips Wafer Head Machine Screws Black 50-Pack Laptop SSD Repair
$4.49 each · min. 2
-
M2 x 4mm Screws for Dell Latitude 5530 SSD Type-C Bracket 10-Pack Black
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Dell Pro 16 PC16250, closest length match first.
- Dell Latitude 7300 also M2 × 2 mm
- Lenovo ThinkPad S230u also M2 × 3 mm
- Lenovo ideapad 330-17IKB also M2 × 3 mm
- Lenovo ThinkPad T16 Gen 1 also M2 × 3 mm
- HP ProBook 450 G3 also M2 × 3 mm
- Lenovo ThinkPad X13 Gen 6 also M2.5 × 2.5 mm
- HP ProBook 4525s also M2 × 2 mm
- HP Mini 5101 also M2 × 2 mm
Questions about Dell Pro 16 PC16250 screws
- What size screw does Dell Pro 16 PC16250 use?
- M2 × 2 mm for unspecified (qty 2); M2 × 2.2 mm for card reader (qty 4); M2 × 2.2 mm for keyboard (qty 22); M2 × 3 mm for I/O board (qty 3); M2 × 3 mm for battery (qty 4, captive); M2 × 3 mm for fan (qty 2); M2 × 3 mm for SSD (qty 1); M2 × 3 mm for system board (qty 3); M2 × 3 mm for wireless card (qty 1); M2 × 4 mm for battery (qty 1); M2 × 5 mm for system board (qty 2); M2 × 5 mm for USB-C board (qty 3); M2 × 5.4 mm for heat sink (qty 4, captive); M2.5 × 2.5 mm for display (qty 6); M2.5 × 3.5 mm for display (qty 4); M2.5 × 5 mm for I/O board (qty 3); M2.5 × 5 mm for DC-in (qty 3); M2.5 × 5 mm for display (qty 6); M2.5 × 5 mm for system board (qty 3); M2.5 × 6 mm for base cover (qty 9, capti.
- How long are the screws in Dell Pro 16 PC16250?
- The records range from 2 to 6 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for Dell Pro 16 PC16250?
- The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Dell Pro 16 PC16250?
- TechSpareWarehouse (our own store) lists M2 x 2mm, M2 x 3mm and M2 x 4mm, which match lengths in the records above.