Dell XPS 13 9345 screw size
M1.4 / M1.6 / M2 / M2.5 · 1.2 to 5 mm long
Our records put Dell XPS 13 9345 on M1.4, M1.6, M2 and M2.5 screws in lengths from 1.2 to 5 mm.
There are 15 separate fitment records for it, including keyboard (qty 17) (M1.4), heat sink (qty 4, captive) (M1.4) and power button (qty 4) (M1.4), plus 12 more in the table below.
Head and drive, as the sources state them: Torx T5 drive.
15 of the 15 records are marked confirmed, drawn from 1 source (dell.com).
An M1.4 screw is 1.4 mm in diameter with a 0.3 mm pitch, tapped with a 1.1 mm drill; imperial look-alike: #0-80 UNF (1.52 mm) — close in diameter, different pitch, do not mix.
Dell XPS 13 9345 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.4 | 1.2 mm | 0.3 mm | not stated | not stated | Keyboard (qty 17) | Confirmed |
| M1.4 | 2 mm | 0.3 mm | not stated | not stated | Heat sink (qty 4, captive)captive | Confirmed |
| M1.4 | 2 mm | 0.3 mm | not stated | not stated | Power button (qty 4) | Confirmed |
| M1.6 | 2 mm | 0.35 mm | not stated | not stated | Battery (qty 1, captive)captive | Confirmed |
| M1.6 | 2 mm | 0.35 mm | not stated | not stated | Display (qty 3, captive)captive | Confirmed |
| M1.6 | 2 mm | 0.35 mm | not stated | not stated | Keyboard (qty 7) | Confirmed |
| M1.6 | 2.3 mm | 0.35 mm | not stated | not stated | System board (qty 7) | Confirmed |
| M1.6 | 2.3 mm | 0.35 mm | not stated | not stated | Wireless card (qty 1, captive)captive | Confirmed |
| M1.6 | 2.5 mm | 0.35 mm | not stated | not stated | Battery (qty 6) | Confirmed |
| M1.6 | 2.5 mm | 0.35 mm | not stated | not stated | Display (qty 3) | Confirmed |
| M1.6 | 2.5 mm | 0.35 mm | not stated | not stated | Fan (qty 4) | Confirmed |
| M1.6 | 3 mm | 0.35 mm | not stated | not stated | USB-C board (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Torx T5 | Base cover (qty 6, Torx T5) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | SSD (qty 1) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | Display (qty 6) | Confirmed |
Fitment records and sources
Keyboard (qty 17)
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
Heat sink (qty 4, captive)
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
Power button (qty 4)
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
Battery (qty 1, captive)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Display (qty 3, captive)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Keyboard (qty 7)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
System board (qty 7)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Wireless card (qty 1, captive)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Battery (qty 6)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Display (qty 3)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Fan (qty 4)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
USB-C board (qty 4)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Base cover (qty 6, Torx T5)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
SSD (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display (qty 6)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M1.4 screw measures about 1.4 mm with calipers (usually a hair under). This device also uses M1.6 / M2 / M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.3 mm from one thread crest to the next (33.33 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 1.2–5 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source names a Torx T5 drive. For comparison, standard M1.4 heads take PH000 / PH00 (Phillips) or T2–T3 (Torx), or a 1.3 mm hex key.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.4 is about 8-12 N·cm into metal threads and 4-7 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.4 / M1.6 / M2 / M2.5
- Dental implant screws (M1.4/M1.6) are proprietary per system — Bredent, NeoBiotech, Nobel and Straumann are not interchangeable even at the same nominal size.
- M1.6 is the most common laptop-internal micro screw after M2 — Dell XPS keyboards specifically call out M1.6 x 1.5mm, and generic M2 substitutes strip the bracket.
- M.2 SSD mounting screws (M2 x 3mm) are frequently mislabeled generically as 'M.2 screws' which can be confused with the M2 metric thread designation — they do coincide numerically here but are conceptually distinct (M.2 = card format, M2 = thread size).
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M1.4 x 2mm Screws for Dell XPS 13 9340 Power Button Fingerprint 10-Pack Black
$4.99 -
M1.4 x 2mm Screws for Dell XPS 14 9440 Power Button – 10-Pack Black
$4.99
-
M1.6 x 3mm Screws Compatible with Dell XPS 13 9340 Keyboard 10-Pack Black
$4.99 -
M1.6 x 3mm Screws for Dell XPS 13 9340 System Board Replacement 10-Pack Black
$4.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Dell XPS 13 9345, closest length match first.
- HP EliteBook 8460p also M2 × 3 mm
- Lenovo M5400 also M2 × 3 mm
- HP 348 G3 also M2 × 3 mm
- Dell XPS M1710 also M2 × 3 mm
- Lenovo ideapad Y900-17ISK also M2 × 3 mm
- HP ProBook 6470b also M2 × 3 mm
- Acer TravelMate 8431 also M2 × 3 mm
- Lenovo ideapad 100-14IBD also M2 × 3 mm
Questions about Dell XPS 13 9345 screws
- What size screw does Dell XPS 13 9345 use?
- M1.4 × 1.2 mm for keyboard (qty 17); M1.4 × 2 mm for heat sink (qty 4, captive); M1.4 × 2 mm for power button (qty 4); M1.6 × 2 mm for battery (qty 1, captive); M1.6 × 2 mm for display (qty 3, captive); M1.6 × 2 mm for keyboard (qty 7); M1.6 × 2.3 mm for system board (qty 7); M1.6 × 2.3 mm for wireless card (qty 1, captive); M1.6 × 2.5 mm for battery (qty 6); M1.6 × 2.5 mm for display (qty 3); M1.6 × 2.5 mm for fan (qty 4); M1.6 × 3 mm for USB-C board (qty 4); M2 × 3 mm for base cover (qty 6, Torx T5); M2 × 3 mm for SSD (qty 1); M2.5 × 5 mm for display (qty 6).
- How long are the screws in Dell XPS 13 9345?
- The records range from 1.2 to 5 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.4 screw?
- 0.3 mm (coarse), which is the standard pitch for M1.4 machine screws. The tap drill is 1.1 mm and the normal clearance hole is 1.6 mm.
- What screwdriver do I need for Dell XPS 13 9345?
- The source lists a Torx T5 drive. Standard M1.4 heads otherwise take PH000 / PH00 (Phillips) or T2–T3 (Torx), or a 1.3 mm hex key.
- Can I use an imperial screw instead of M1.4?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) — close in diameter, different pitch, do not mix. Use a true M1.4 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Dell XPS 13 9345?
- TechSpareWarehouse (our own store) lists M1.4 x 2mm, M1.6 x 3mm and M2 x 3mm, which match lengths in the records above.