Dell XPS 13 9370 screw size
M1.4 / M1.6 / M2 / M2.5 · 1.5 to 4 mm long
Our records put Dell XPS 13 9370 on M1.4, M1.6, M2 and M2.5 screws in lengths from 1.5 to 4 mm.
There are 15 separate fitment records for it, including power button (qty 2) (M1.4), keyboard (qty 29) (M1.6) and power button (qty 1) (M1.6), plus 12 more in the table below.
Head and drive, as the sources state them: Torx drive.
15 of the 15 records are marked confirmed, drawn from 1 source (dell.com).
An M1.4 screw is 1.4 mm in diameter with a 0.3 mm pitch, tapped with a 1.1 mm drill; imperial look-alike: #0-80 UNF (1.52 mm) — close in diameter, different pitch, do not mix.
Dell XPS 13 9370 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.4 | 1.7 mm | 0.3 mm | not stated | not stated | Power button (qty 2) | Confirmed |
| M1.6 | 1.5 mm | 0.35 mm | not stated | not stated | Keyboard (qty 29) | Confirmed |
| M1.6 | 1.5 mm | 0.35 mm | not stated | not stated | Power button (qty 1) | Confirmed |
| M1.6 | 2.5 mm | 0.35 mm | not stated | not stated | Display (qty 2) | Confirmed |
| M1.6 | 2.5 mm | 0.35 mm | not stated | not stated | System board (qty 10) | Confirmed |
| M1.6 | 3 mm | 0.35 mm | not stated | not stated | Fan (qty 2) | Confirmed |
| M1.6 | 3 mm | 0.35 mm | not stated | not stated | Unspecified (qty 4) | Confirmed |
| M1.6 | 3 mm | 0.35 mm | not stated | not stated | Wireless card (qty 1) | Confirmed |
| M1.6 | 4 mm | 0.35 mm | not stated | not stated | Battery (qty 1) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | Battery (qty 4) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | Speaker (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Torx | Base cover (qty 8, Torx) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Heat sink (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | SSD (qty 1) | Confirmed |
| M2.5 | 4 mm | 0.45 mm | not stated | not stated | Display (qty 4) | Confirmed |
Fitment records and sources
Power button (qty 2)
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
Keyboard (qty 29)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Power button (qty 1)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Display (qty 2)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
System board (qty 10)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Fan (qty 2)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Unspecified (qty 4)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Wireless card (qty 1)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Battery (qty 1)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Battery (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Speaker (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Base cover (qty 8, Torx)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Heat sink (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
SSD (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display (qty 4)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M1.4 screw measures about 1.4 mm with calipers (usually a hair under). This device also uses M1.6 / M2 / M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.3 mm from one thread crest to the next (33.33 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 1.5–4 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source names a Torx drive. For comparison, standard M1.4 heads take PH000 / PH00 (Phillips) or T2–T3 (Torx), or a 1.3 mm hex key.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.4 is about 8-12 N·cm into metal threads and 4-7 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.4 / M1.6 / M2 / M2.5
- Dental implant screws (M1.4/M1.6) are proprietary per system — Bredent, NeoBiotech, Nobel and Straumann are not interchangeable even at the same nominal size.
- M1.6 is the most common laptop-internal micro screw after M2 — Dell XPS keyboards specifically call out M1.6 x 1.5mm, and generic M2 substitutes strip the bracket.
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M1.6 x 3mm Screws Compatible with Dell XPS 13 9340 Keyboard 10-Pack Black
$4.99 -
M1.6 x 3mm Screws for Dell XPS 13 9340 System Board Replacement 10-Pack Black
$4.99
-
M1.6 x 4mm Screws Compatible with Dell XPS 14 9440 Battery System Board 10-Pack
$4.99 -
M1.6 x 4mm Phillips Wafer Head Micro Screws LCD Shell Repair 10-Pack
$4.99
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Dell XPS 13 9370, closest length match first.
- Dell Latitude 5400 also M2 × 2 mm
- HP 245 G7 also M2 × 2 mm
- Dell Inspiron 15 5598 also M2 × 2 mm
- Lenovo B50-50 also M2 × 3 mm
- Framework Laptop 13 WiFi / storage / audio board screw also M2 × 3 mm
- Lenovo YOGA 500-15ISK also M2.5 × 4 mm
- Lenovo K49 also M2 × 3 mm
- Lenovo ThinkPad R50 also M2 × 3 mm
Questions about Dell XPS 13 9370 screws
- What size screw does Dell XPS 13 9370 use?
- M1.4 × 1.7 mm for power button (qty 2); M1.6 × 1.5 mm for keyboard (qty 29); M1.6 × 1.5 mm for power button (qty 1); M1.6 × 2.5 mm for display (qty 2); M1.6 × 2.5 mm for system board (qty 10); M1.6 × 3 mm for fan (qty 2); M1.6 × 3 mm for unspecified (qty 4); M1.6 × 3 mm for wireless card (qty 1); M1.6 × 4 mm for battery (qty 1); M2 × 2 mm for battery (qty 4); M2 × 2 mm for speaker (qty 4); M2 × 3 mm for base cover (qty 8, Torx); M2 × 3 mm for heat sink (qty 4); M2 × 3 mm for SSD (qty 1); M2.5 × 4 mm for display (qty 4).
- How long are the screws in Dell XPS 13 9370?
- The records range from 1.5 to 4 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.4 screw?
- 0.3 mm (coarse), which is the standard pitch for M1.4 machine screws. The tap drill is 1.1 mm and the normal clearance hole is 1.6 mm.
- What screwdriver do I need for Dell XPS 13 9370?
- The source lists a Torx drive. Standard M1.4 heads otherwise take PH000 / PH00 (Phillips) or T2–T3 (Torx), or a 1.3 mm hex key.
- Can I use an imperial screw instead of M1.4?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) — close in diameter, different pitch, do not mix. Use a true M1.4 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Dell XPS 13 9370?
- TechSpareWarehouse (our own store) lists M1.6 x 3mm, M1.6 x 4mm and M2 x 2mm, which match lengths in the records above.