Framework Laptop 13 keyboard bracket screw screw size
M1.2 · 1.3 mm long
Framework Laptop 13 keyboard bracket screw takes M1.2 metric screws, 1.3 mm long.
The record covers PH0 head, 3.2mm head dia.
Head and drive, as the source states them: Phillips PH0 drive.
This entry is marked confirmed and comes from guides.frame.work.
For reference, M1.2 is 1.2 mm across the threads at 0.25 mm pitch. The imperial size people confuse it with: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute.
Framework Laptop 13 keyboard bracket screw screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.2 | 1.3 mm | 0.25 mm | not stated | Phillips PH0 | PH0 head, 3.2mm head dia | Confirmed |
Fitment records and sources
PH0 head, 3.2mm head dia
pitch 0.25 mm · tap 0.95 mm · clearance 1.4 mm · PH000 / JIS 00 / Torx T1–T2
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M1.2 screw measures about 1.2 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.25 mm from one thread crest to the next (40 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 1.3 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source names a Phillips PH0 drive. For comparison, standard M1.2 heads take PH000 / JIS 00 (Phillips) or T1–T2 (Torx).
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.2 is about 5-8 N·cm into metal threads and 3-5 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.2
- Framework lists both M1.2 x 3.0 silver and M1.6 x 3.0 black expansion-card screws; they look identical in the tray but are not interchangeable.
- M1.2 and M1.4 look identical in an eyeglass repair kit — the wrong one strips soft acetate or metal hinges.
More in Laptops & PCs
2.5in drive trays & caddiesAcer / MSI laptopsAcer 5510/4020 series I/O and misc chassis screwsAcer 7520 / 7220Acer Aspire / Swift bottom coverAcer Aspire / Swift M.2 SSDAcer Aspire 1310Acer Aspire 1410Acer Aspire 1420PAcer Aspire 1650Acer Aspire 1680Acer Aspire 1690
Browse all 2799 in Laptops & PCs →The same screw also fits
Devices whose records share a thread with Framework Laptop 13 keyboard bracket screw, closest length match first.
- Dell Inspiron 15 7591 2-in-1 also M1.2 × 1.3 mm
- Framework Laptop 13 keyboard and expansion-card brackets also M1.2 × 1.3 mm
- Dell Latitude 9330 also M1.2 × 1.3 mm
- Framework Laptop 13 keyboard bracket also M1.2 × 1.3 mm
- Dell Inspiron 13 7390 2-in-1 also M1.2 × 1.3 mm
- Dell Inspiron 13 7391 2-in-1 also M1.2 × 1.3 mm
- Watch dial foot / movement ring also M1.2 × 1.3 mm
- Apple Watch strap adapter also M1.2 × 1.3 mm
Questions about Framework Laptop 13 keyboard bracket screw screws
- What size screw does Framework Laptop 13 keyboard bracket screw use?
- M1.2 × 1.3 mm for PH0 head, 3.2mm head dia.
- How long are the screws in Framework Laptop 13 keyboard bracket screw?
- The record gives 1.3 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M1.2 screw?
- 0.25 mm (coarse), which is the standard pitch for M1.2 machine screws. The tap drill is 0.95 mm and the normal clearance hole is 1.4 mm.
- What screwdriver do I need for Framework Laptop 13 keyboard bracket screw?
- The source lists a Phillips PH0 drive. Standard M1.2 heads otherwise take PH000 / JIS 00 (Phillips) or T1–T2 (Torx).
- Can I use an imperial screw instead of M1.2?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute. Use a true M1.2 screw so it does not cross-thread or strip the hole.