Framework Laptop 13 Wi-Fi module screw size
M2 · 3 mm long
Framework Laptop 13 Wi-Fi module takes M2 metric screws, 3 mm long.
Where it is used: holds the Wi-Fi card down; special T5 head, 4.5mm wide.
Head and drive, as the source states them: Torx T5 drive.
This entry is marked confirmed and comes from community.frame.work.
An M2 screw is 2 mm in diameter with a 0.4 mm pitch, tapped with a 1.6 mm drill; imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
Framework Laptop 13 Wi-Fi module screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 3 mm | 0.4 mm | not stated | Torx T5 | holds the Wi-Fi card down; special T5 head, 4.5mm wide | Confirmed |
Fitment records and sources
holds the Wi-Fi card down; special T5 head, 4.5mm wide
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 3 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source names a Torx T5 drive. For comparison, standard M2 heads take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2
- Framework 13 and 16 use five thread families (M1.2 to M2.5) with overlapping lengths; buy Framework's own fastener kit rather than generic M2 screws.
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
2.5in drive trays & caddiesAcer / MSI laptopsAcer 5510/4020 series I/O and misc chassis screwsAcer 7520 / 7220Acer Aspire / Swift bottom coverAcer Aspire / Swift M.2 SSDAcer Aspire 1310Acer Aspire 1410Acer Aspire 1420PAcer Aspire 1650Acer Aspire 1680Acer Aspire 1690
Browse all 2799 in Laptops & PCs →The same screw also fits
Devices whose records share a thread with Framework Laptop 13 Wi-Fi module, closest length match first.
- Dell Inspiron 13 5330 also M2 × 3 mm
- Lenovo ideapad 320L-17IKB also M2 × 3 mm
- Lenovo ThinkPad T15g Gen 1 also M2 × 3 mm
- Dell Inspiron 17 7791 2-in-1 also M2 × 3 mm
- Dell Latitude D620 ATG also M2 × 3 mm
- Dell Inspiron 14 7400 also M2 × 3 mm
- Lenovo ThinkPad X201i also M2 × 3 mm
- Dell Precision M4300 also M2 × 3 mm
Questions about Framework Laptop 13 Wi-Fi module screws
- What size screw does Framework Laptop 13 Wi-Fi module use?
- M2 × 3 mm for holds the Wi-Fi card down; special T5 head, 4.5mm wide.
- How long are the screws in Framework Laptop 13 Wi-Fi module?
- The record gives 3 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for Framework Laptop 13 Wi-Fi module?
- The source lists a Torx T5 drive. Standard M2 heads otherwise take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Framework Laptop 13 Wi-Fi module?
- TechSpareWarehouse (our own store) lists M2 x 3mm, which matches the length in the records above.