What size screw does Framework Laptop 13 WiFi, M.2 storage and audio board use?

M2 × 3 mm for M2 x 3.0mm T5, 4.5mm head.

How long are the screws in Framework Laptop 13 WiFi, M.2 storage and audio board?

The record gives 3 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.

What is the thread pitch of an M2 screw?

0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.

What screwdriver do I need for Framework Laptop 13 WiFi, M.2 storage and audio board?

The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.

Can I use an imperial screw instead of M2?

No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.

Where can I buy replacement screws for Framework Laptop 13 WiFi, M.2 storage and audio board?

TechSpareWarehouse (our own store) lists M2 x 3mm, which matches the length in the records above.

Framework Laptop 13 WiFi, M.2 storage and audio board screw size

M2 · 3 mm long

If you are replacing a screw on Framework Laptop 13 WiFi, M.2 storage and audio board, the thread is M2, 3 mm long.

It is listed for M2 x 3.0mm T5, 4.5mm head.

This entry is marked confirmed and comes from guides.frame.work.

For reference, M2 is 2 mm across the threads at 0.4 mm pitch. The imperial size people confuse it with: #2-56 UNC (2.18 mm) is close but not interchangeable.

Framework Laptop 13 WiFi, M.2 storage and audio board screw specifications

One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.

Thread	Length	Pitch	Head	Drive	Where it goes	Status
M2	3 mm	0.4 mm	not stated	not stated	M2 x 3.0mm T5, 4.5mm head	Confirmed

Fitment records and sources

M23.0mmconfirmed

M2 x 3.0mm T5, 4.5mm head

pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6

Source

How to check the screw before you buy

Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
The record states 3 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.

Common mix-ups with M2

Framework 13 and 16 use five thread families (M1.2 to M2.5) with overlapping lengths; buy Framework's own fastener kit rather than generic M2 screws.
The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.

Pitch gauge · Screw size finder · Torque guide

Buy these screws at TechSpare Warehouse

In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.

More in Laptops & PCs

2.5in drive trays & caddies Acer / MSI laptops Acer 5510/4020 series I/O and misc chassis screws Acer 7520 / 7220 Acer Aspire / Swift bottom cover Acer Aspire / Swift M.2 SSD Acer Aspire 1310 Acer Aspire 1410 Acer Aspire 1420P Acer Aspire 1650 Acer Aspire 1680 Acer Aspire 1690

Browse all 2799 in Laptops & PCs →

The same screw also fits

Devices whose records share a thread with Framework Laptop 13 WiFi, M.2 storage and audio board, closest length match first.

HP 250 G3 also M2 × 3 mm
Lenovo ideapad 500-15ACZ also M2 × 3 mm
Lenovo S20-30 also M2 × 3 mm
Dell Latitude 3301 also M2 × 3 mm
HP 15s-fq3000 also M2 × 3 mm
HP 250 G4 also M2 × 3 mm
Lenovo ThinkPad T480 also M2 × 3 mm
Framework Laptop 16 primary M.2 2280 NVMe SSD also M2 × 3 mm

Questions about Framework Laptop 13 WiFi, M.2 storage and audio board screws

What size screw does Framework Laptop 13 WiFi, M.2 storage and audio board use?: M2 × 3 mm for M2 x 3.0mm T5, 4.5mm head.
How long are the screws in Framework Laptop 13 WiFi, M.2 storage and audio board?: The record gives 3 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
What is the thread pitch of an M2 screw?: 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
What screwdriver do I need for Framework Laptop 13 WiFi, M.2 storage and audio board?: The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
Can I use an imperial screw instead of M2?: No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
Where can I buy replacement screws for Framework Laptop 13 WiFi, M.2 storage and audio board?: TechSpareWarehouse (our own store) lists M2 x 3mm, which matches the length in the records above.

Heads up: shipping delay