Framework Laptop 16 (T5 2.0/2.6/3.0 mm) screw size
M2 · 2 to 3 mm long
If you are replacing a screw on Framework Laptop 16 (T5 2.0/2.6/3.0 mm), the thread is M2 in lengths from 2 to 3 mm.
The record covers official fastener guide lists M2 T5 screws at 2.0 mm (4.5 mm head), 2.6 mm (5.5 mm head) and 3.0 mm (4.5 mm head).
This entry is marked confirmed and comes from ifixit.com.
M2 means a 2 mm nominal diameter with a 0.4 mm thread pitch. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
Framework Laptop 16 (T5 2.0/2.6/3.0 mm) screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 2–3 mm | 0.4 mm | not stated | not stated | Official fastener guide lists M2 T5 screws at 2.0 mm (4.5 mm head), 2.6 mm (5.5 mm head) and 3.0 mm (4.5 mm head) | Confirmed |
Fitment records and sources
Official fastener guide lists M2 T5 screws at 2.0 mm (4.5 mm head), 2.6 mm (5.5 mm head) and 3.0 mm (4.5 mm head).
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
How to check the screw before you buy
- Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2–3 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2
- Framework 13 and 16 use five thread families (M1.2 to M2.5) with overlapping lengths; buy Framework's own fastener kit rather than generic M2 screws.
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 2.5mm Screws for Dell XPS 14 9440 M.2 SSD Drive – 10-Pack Black
$4.99 -
M2 x 2.5mm Screws for ASUS ROG Strix G17 G713 SSD WiFi Touchpad 10-Pack Black
$4.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
2.5in drive trays & caddiesAcer / MSI laptopsAcer 5510/4020 series I/O and misc chassis screwsAcer 7520 / 7220Acer Aspire / Swift bottom coverAcer Aspire / Swift M.2 SSDAcer Aspire 1310Acer Aspire 1410Acer Aspire 1420PAcer Aspire 1650Acer Aspire 1680Acer Aspire 1690
Browse all 2799 in Laptops & PCs →The same screw also fits
Devices whose records share a thread with Framework Laptop 16 (T5 2.0/2.6/3.0 mm), closest length match first.
- Lenovo ideapad 330L-17ICH also M2 × 3 mm
- Lenovo ThinkPad T450s also M2 × 2 mm
- HP EliteBook 8540p also M2 × 3 mm
- HP Compaq nx7010 also M2 × 3 mm
- Lenovo ideapad 310S-14AST also M2 × 2 mm
- HP Pavilion 14-al0xx also M2 × 2.2 mm
- Lenovo ideapad 330S-15AST U also M2 × 3 mm
- HP EliteBook 630 G10 also M2 × 2 mm
Questions about Framework Laptop 16 (T5 2.0/2.6/3.0 mm) screws
- What size screw does Framework Laptop 16 (T5 2.0/2.6/3.0 mm) use?
- M2 × 2–3 mm for official fastener guide lists M2 T5 screws at 2.0 mm (4.5 mm head), 2.6 mm (5.5 mm head) and 3.0 mm (4.5 mm head).
- How long are the screws in Framework Laptop 16 (T5 2.0/2.6/3.0 mm)?
- The records range from 2 to 3 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for Framework Laptop 16 (T5 2.0/2.6/3.0 mm)?
- The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Framework Laptop 16 (T5 2.0/2.6/3.0 mm)?
- TechSpareWarehouse (our own store) lists M2 x 2mm, M2 x 2.5mm and M2 x 3mm, which match lengths in the records above.