HP EliteBook 840 G11 screw size
M2 / M2.5 · 2 to 10.5 mm long
HP EliteBook 840 G11 takes M2 and M2.5 metric screws in lengths from 2 to 10.5 mm.
There are 6 separate fitment records for it, including phillips M2.0 x 2.5 WLAN and WWAN module screws; M2.0 x 2.0 speaker screws (x2); M2.0 x 4. (M2), speaker mounting screws (2x each) and card reader board screws (3x) (M2) and battery mounting screws (4x), top bracket screws and 7 keyboard screws (M2), plus 3 more in the table below.
Head and drive, as the sources state them: Phillips drive.
6 of the 6 records are marked confirmed, drawn from 1 source (kaas.hpcloud.hp.com).
An M2 screw is 2 mm in diameter with a 0.4 mm pitch, tapped with a 1.6 mm drill; imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
HP EliteBook 840 G11 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 2–4 mm | 0.4 mm | not stated | Phillips | Phillips M2.0 x 2.5 WLAN and WWAN module screws; M2.0 x 2.0 speaker screws (x2); M2.0 x 4.0 battery screws (x4) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | speaker mounting screws (2x each) and card reader board screws (3x) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | battery mounting screws (4x), top bracket screws and 7 keyboard screws | Confirmed |
| M2 | 2.5 mm | 0.4 mm | not stated | not stated | fingerprint reader bracket screw | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | display assembly screws (8x) | Confirmed |
| M2.5 | 10.5 mm | 0.45 mm | not stated | not stated | display hinge to back cover screws (6x) | Confirmed |
Fitment records and sources
Phillips M2.0 x 2.5 WLAN and WWAN module screws; M2.0 x 2.0 speaker screws (x2); M2.0 x 4.0 battery screws (x4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
speaker mounting screws (2x each) and card reader board screws (3x)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
battery mounting screws (4x), top bracket screws and 7 keyboard screws
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
fingerprint reader bracket screw
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
display assembly screws (8x)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
display hinge to back cover screws (6x)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). This device also uses M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2–10.5 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source names a Phillips drive. For comparison, standard M2 heads take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2 / M2.5
- M.2 SSD mounting screws (M2 x 3mm) are frequently mislabeled generically as 'M.2 screws' which can be confused with the M2 metric thread designation — they do coincide numerically here but are conceptually distinct (M.2 = card format, M2 = thread size).
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- M2.5 and M3 look the same to the naked eye — you need calipers on the shank to tell them apart.
- M2.5 pitch is 0.45mm vs M3's 0.5mm and M2's 0.4mm — forcing the wrong one strips plastic bosses instantly.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 2.5mm Screws for Dell XPS 14 9440 M.2 SSD Drive – 10-Pack Black
$4.99 -
M2 x 2.5mm Screws for ASUS ROG Strix G17 G713 SSD WiFi Touchpad 10-Pack Black
$4.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with HP EliteBook 840 G11, closest length match first.
- HP 340 G3 also M2 × 2 mm
- Dell Inspiron 16 7630 2-in-1 also M2 × 2 mm
- Dell Latitude 5320 2-in-1 also M2 × 2 mm
- Dell Vostro 16 5635 also M2 × 3 mm
- Lenovo B430 also M2 × 2 mm
- Sony 170K also M2 × 4 mm
- Acer TravelMate 4530 also M2 × 2.3 mm
- Lenovo V110-14IAP also M2 × 3 mm
Questions about HP EliteBook 840 G11 screws
- What size screw does HP EliteBook 840 G11 use?
- M2 × 2–4 mm for phillips M2.0 x 2.5 WLAN and WWAN module screws; M2.0 x 2.0 speaker screws (x2); M2.0 x 4.0 battery screws (x4); M2 × 2 mm for speaker mounting screws (2x each) and card reader board screws (3x); M2 × 4 mm for battery mounting screws (4x), top bracket screws and 7 keyboard screws; M2 × 2.5 mm for fingerprint reader bracket screw; M2.5 × 5 mm for display assembly screws (8x); M2.5 × 10.5 mm for display hinge to back cover screws (6x).
- How long are the screws in HP EliteBook 840 G11?
- The records range from 2 to 10.5 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for HP EliteBook 840 G11?
- The source lists a Phillips drive. Standard M2 heads otherwise take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for HP EliteBook 840 G11?
- TechSpareWarehouse (our own store) lists M2 x 2mm, M2 x 2.5mm and M2 x 3mm, which match lengths in the records above.