Lenovo 100w Gen 5 screw size
M2 / M2.5 · 2.5 to 4 mm long
The screws used on Lenovo 100w Gen 5 are M2 and M2.5 in lengths from 2.5 to 4 mm.
There are 8 separate fitment records for it, including display (qty 8, flat, black) (M2), display (qty 3, flat, black) (M2) and unspecified (qty 2, flat, black) (M2), plus 5 more in the table below.
8 of the 8 records are marked confirmed, drawn from 1 source (download.lenovo.com).
M2 means a 2 mm nominal diameter with a 0.4 mm thread pitch. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
Lenovo 100w Gen 5 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 2.5 mm | 0.4 mm | not stated | not stated | Display (qty 8, flat, black)black finish | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Display (qty 3, flat, black)black finish | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Unspecified (qty 2, flat, black)black finish | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | I/O board (qty 2, flat, silver) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | System board (qty 6, flat, silver) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | USB-C board (qty 4, flat, silver) | Confirmed |
| M2.5 | 3.5 mm | 0.45 mm | not stated | not stated | Display (qty 6, flat, black)black finish | Confirmed |
| M2.5 | 4 mm | 0.45 mm | not stated | not stated | Display (qty 6, flat, black)black finish | Confirmed |
Fitment records and sources
Display (qty 8, flat, black)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display (qty 3, flat, black)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 2, flat, black)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
I/O board (qty 2, flat, silver)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 6, flat, silver)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
USB-C board (qty 4, flat, silver)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display (qty 6, flat, black)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display (qty 6, flat, black)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). This device also uses M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2.5–4 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2 / M2.5
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- M2 (2.00mm, 0.4mm pitch) is NOT the same as #2-56 UNC (2.18mm) — close enough to cross-thread and strip if forced.
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
- M2.5 and M3 look the same to the naked eye — you need calipers on the shank to tell them apart.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2 x 2.5mm Screws for Dell XPS 14 9440 M.2 SSD Drive – 10-Pack Black
$4.99 -
M2 x 2.5mm Screws for ASUS ROG Strix G17 G713 SSD WiFi Touchpad 10-Pack Black
$4.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
M2.5 x 4mm Screws for Lenovo IdeaPad 5 Pro 14 Display Hinge 10-Pack Black
$4.99 -
M2.5 x 4mm Screws for Lenovo IdeaPad 5 Pro 14 System Board Hinge 10-Pack Black
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Lenovo 100w Gen 5, closest length match first.
- Dell Inspiron 15 7501 also M2 × 3 mm
- Dell Inspiron 15 5585 also M2 × 3 mm
- HP mt21 Mobile Thin Client also M2 × 3 mm
- HP ZBook Firefly 16 G10 also M2 × 3 mm
- HP ProBook 4420s also M2 × 3 mm
- HP ProBook 4421s also M2 × 3 mm
- Lenovo IdeaPad S410p also M2 × 2.5 mm
- Dell Vostro 14 3468 also M2 × 2.5 mm
Questions about Lenovo 100w Gen 5 screws
- What size screw does Lenovo 100w Gen 5 use?
- M2 × 2.5 mm for display (qty 8, flat, black); M2 × 3 mm for display (qty 3, flat, black); M2 × 3 mm for unspecified (qty 2, flat, black); M2 × 3.5 mm for I/O board (qty 2, flat, silver); M2 × 3.5 mm for system board (qty 6, flat, silver); M2 × 3.5 mm for USB-C board (qty 4, flat, silver); M2.5 × 3.5 mm for display (qty 6, flat, black); M2.5 × 4 mm for display (qty 6, flat, black).
- How long are the screws in Lenovo 100w Gen 5?
- The records range from 2.5 to 4 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for Lenovo 100w Gen 5?
- The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Lenovo 100w Gen 5?
- TechSpareWarehouse (our own store) lists M2 x 2.5mm, M2 x 3mm and M2.5 x 4mm, which match lengths in the records above.