Lenovo ideapad 330S-15ARR screw size

Lenovo ideapad 330S-15ARR screw specifications

One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.

How to check the screw before you buy

1. A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
2. Diameter: across the threads an M1.6 screw measures about 1.6 mm with calipers (usually a hair under). This device also uses M2 / M2.5 / M3, so measure each screw rather than assuming they match.
3. Pitch: 0.35 mm from one thread crest to the next (28.57 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
4. Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
5. The records span 2.3–5.5 mm, which means different positions take different lengths — match each hole to its own screw.
6. Driver: the source names a Phillips drive. For comparison, standard M1.6 heads take PH00 (Phillips) or T4–T5 (Torx), or a 1.5 mm hex key.
7. Tightening: no device-specific torque is published in these records. The site's general figure for M1.6 is about 12-20 N·cm into metal threads and 6-10 N·cm into plastic bosses; snug it up and stop.

Pitch gauge · Screw size finder · Torque guide

More in Laptops & PCs

The same screw also fits

Devices whose records share a thread with Lenovo ideapad 330S-15ARR, closest length match first.

• Dell Inspiron 14 3468 also M2 × 3 mm
• HP 17-x000 (Touch) also M2 × 3 mm
• Lenovo ideapad 510S-14ISK also M2 × 3 mm
• HP or nx9020 PC Compaq Presario 2200 also M2 × 3 mm
• HP EliteBook Folio 1030 G1 also M2 × 3 mm
• Dell Inspiron 17 7779 2-in-1 also M2 × 3 mm
• Dell Inspiron 14 7441 Plus also M2 × 5.5 mm
• Lenovo ThinkPad L15 Gen 2 also M2 × 3 mm

Questions about Lenovo ideapad 330S-15ARR screws

What size screw does Lenovo ideapad 330S-15ARR use?

M1.6 × 2.5 mm for display (qty 4, black, Phillips); M2 × 3 mm for I/O board (qty 2, black, Phillips); M2 × 3 mm for battery (qty 5, black, Phillips); M2 × 3 mm for fan (qty 3, black, Phillips); M2 × 3 mm for hard drive (qty 4, black, Phillips); M2 × 3 mm for SSD (qty 1, black, Phillips); M2 × 3 mm for system board (qty 2, black, Phillips); M2 × 3 mm for wireless card (qty 1, black, Phillips); M2 × 5.5 mm for base cover (qty 10, black, Phillips); M2.5 × 2.3 mm for display (qty 8, black, Phillips); M2.5 × 5 mm for palm rest (qty 6, black, Phillips); M3 × 3 mm for hard drive (qty 4, black, Phillips).

How long are the screws in Lenovo ideapad 330S-15ARR?

The records range from 2.3 to 5.5 mm depending on the position, so match each screw to its own hole.

What is the thread pitch of an M1.6 screw?

0.35 mm (coarse), which is the standard pitch for M1.6 machine screws; a 0.2 mm fine pitch exists but is uncommon. The tap drill is 1.25 mm and the normal clearance hole is 1.8 mm.

What screwdriver do I need for Lenovo ideapad 330S-15ARR?

The source lists a Phillips drive. Standard M1.6 heads otherwise take PH00 (Phillips) or T4–T5 (Torx), or a 1.5 mm hex key.

Can I use an imperial screw instead of M1.6?

No. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent. Use a true M1.6 screw so it does not cross-thread or strip the hole.

Where can I buy replacement screws for Lenovo ideapad 330S-15ARR?

TechSpareWarehouse (our own store) lists M2 x 3mm, M2.5 x 5mm and M3 x 3mm, which match lengths in the records above.