Lenovo IdeaPad C340-14IML screw size
M1.6 / M2 / M2.5 · 2 to 6 mm long
The screws used on Lenovo IdeaPad C340-14IML are M1.6, M2 and M2.5 in lengths from 2 to 6 mm.
There are 13 separate fitment records for it, including display (qty 4) (M1.6), hinge (qty 6) (M2) and wireless card (qty 1) (M2), plus 10 more in the table below.
13 of the 13 records are marked confirmed, drawn from 1 source (download.lenovo.com).
An M1.6 screw is 1.6 mm in diameter with a 0.35 mm pitch, tapped with a 1.25 mm drill; imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent.
Lenovo IdeaPad C340-14IML screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.6 | 2 mm | 0.35 mm | not stated | not stated | Display (qty 4) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | Hinge (qty 6) | Confirmed |
| M2 | 2.5 mm | 0.4 mm | not stated | not stated | Wireless card (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | I/O board (qty 2) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Battery (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Heat sink | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Power button (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | System board (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Wireless card (qty 1) | Confirmed |
| M2 | 6 mm | 0.4 mm | not stated | not stated | Base cover (qty 10) | Confirmed |
| M2.5 | 4.5 mm | 0.45 mm | not stated | not stated | DC-in (qty 2) | Confirmed |
| M2.5 | 4.5 mm | 0.45 mm | not stated | not stated | Palm rest (qty 4) | Confirmed |
| M2.5 | 4.5 mm | 0.45 mm | not stated | not stated | System board (qty 2) | Confirmed |
Fitment records and sources
Display (qty 4)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Hinge (qty 6)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
I/O board (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Battery (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Heat sink
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Power button (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Base cover (qty 10)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
DC-in (qty 2)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Palm rest (qty 4)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
System board (qty 2)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
- Diameter: across the threads an M1.6 screw measures about 1.6 mm with calipers (usually a hair under). This device also uses M2 / M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.35 mm from one thread crest to the next (28.57 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2–6 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M1.6 heads take PH00 for Phillips and T4–T5 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.6 is about 12-20 N·cm into metal threads and 6-10 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.6 / M2 / M2.5
- Headphone hinge screw sizes are usually quoted from screwdriver bit size, not an actual thread spec - measure before buying.
- M.2 SSD mounting screws (M2 x 3mm) are frequently mislabeled generically as 'M.2 screws' which can be confused with the M2 metric thread designation — they do coincide numerically here but are conceptually distinct (M.2 = card format, M2 = thread size).
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 2.5mm Screws for Dell XPS 14 9440 M.2 SSD Drive – 10-Pack Black
$4.99 -
M2 x 2.5mm Screws for ASUS ROG Strix G17 G713 SSD WiFi Touchpad 10-Pack Black
$4.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Lenovo IdeaPad C340-14IML, closest length match first.
- Lenovo ThinkPad W701ds also M2 × 3 mm
- Dell Latitude D530 also M2 × 3 mm
- Lenovo V580 also M2 × 3 mm
- Dell Chromebook 11 3189 2-in-1 also M2 × 3 mm
- Lenovo ideapad 130-15IKB also M2 × 2.5 mm
- HP ZBook 8 G1ah 14 inch also M1.6 × 2 mm
- Lenovo V14 Gen 3 also M2 × 2 mm
- Lenovo ideapad 320H-17ABR also M2 × 3 mm
Questions about Lenovo IdeaPad C340-14IML screws
- What size screw does Lenovo IdeaPad C340-14IML use?
- M1.6 × 2 mm for display (qty 4); M2 × 2 mm for hinge (qty 6); M2 × 2.5 mm for wireless card (qty 1); M2 × 3 mm for I/O board (qty 2); M2 × 3 mm for battery (qty 4); M2 × 3 mm for heat sink; M2 × 3 mm for power button (qty 1); M2 × 3 mm for system board (qty 1); M2 × 3 mm for wireless card (qty 1); M2 × 6 mm for base cover (qty 10); M2.5 × 4.5 mm for DC-in (qty 2); M2.5 × 4.5 mm for palm rest (qty 4); M2.5 × 4.5 mm for system board (qty 2).
- How long are the screws in Lenovo IdeaPad C340-14IML?
- The records range from 2 to 6 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.6 screw?
- 0.35 mm (coarse), which is the standard pitch for M1.6 machine screws; a 0.2 mm fine pitch exists but is uncommon. The tap drill is 1.25 mm and the normal clearance hole is 1.8 mm.
- What screwdriver do I need for Lenovo IdeaPad C340-14IML?
- The sources do not name the drive. For M1.6, Phillips heads normally take PH00 and Torx heads T4–T5; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M1.6?
- No. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent. Use a true M1.6 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Lenovo IdeaPad C340-14IML?
- TechSpareWarehouse (our own store) lists M2 x 2mm, M2 x 2.5mm and M2 x 3mm, which match lengths in the records above.