Lenovo IdeaPad S340-13IML screw size
M1.6 / M2 / M2.5 · 2 to 6 mm long
Our records put Lenovo IdeaPad S340-13IML on M1.6, M2 and M2.5 screws in lengths from 2 to 6 mm.
There are 12 separate fitment records for it, including unspecified (qty 2) (M1.6), hinge (qty 4) (M1.6) and hinge (qty 6) (M2), plus 9 more in the table below.
12 of the 12 records are marked confirmed, drawn from 1 source (download.lenovo.com).
M1.6 means a 1.6 mm nominal diameter with a 0.35 mm thread pitch. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent.
Lenovo IdeaPad S340-13IML screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.6 | 3 mm | 0.35 mm | not stated | not stated | Unspecified (qty 2) | Confirmed |
| M1.6 | 4.5 mm | 0.35 mm | not stated | not stated | Hinge (qty 4) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | Hinge (qty 6) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | SSD (qty 1) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | I/O board (qty 1) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | Battery (qty 4) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | Heat sink (qty 5) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | SSD (qty 1) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | System board (qty 2) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | Wireless card (qty 1) | Confirmed |
| M2 | 4.5 mm | 0.4 mm | not stated | not stated | Base cover (qty 10) | Confirmed |
| M2.5 | 6 mm | 0.45 mm | not stated | not stated | Palm rest (qty 6) | Confirmed |
Fitment records and sources
Unspecified (qty 2)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Hinge (qty 4)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Hinge (qty 6)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
SSD (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
I/O board (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Battery (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Heat sink (qty 5)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
SSD (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Base cover (qty 10)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Palm rest (qty 6)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M1.6 screw measures about 1.6 mm with calipers (usually a hair under). This device also uses M2 / M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.35 mm from one thread crest to the next (28.57 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2–6 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M1.6 heads take PH00 for Phillips and T4–T5 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.6 is about 12-20 N·cm into metal threads and 6-10 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.6 / M2 / M2.5
- Headphone hinge screw sizes are usually quoted from screwdriver bit size, not an actual thread spec - measure before buying.
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M1.6 x 3mm Screws Compatible with Dell XPS 13 9340 Keyboard 10-Pack Black
$4.99 -
M1.6 x 3mm Screws for Dell XPS 13 9340 System Board Replacement 10-Pack Black
$4.99
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2.5 x 6mm Laptop Motherboard Replacement Screws Wafer Head 10-Pack Black
$4.99 -
10x M2.5 x 6mm Phillips Screws for Lenovo ThinkPad X131e Chromebook LCD Hinge
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
-
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Lenovo IdeaPad S340-13IML, closest length match first.
- HP 14-cf1000 also M2 × 2 mm
- MSI / ASUS RGB keyboard module also M2 × 2 mm
- HP Chromebook 14 inch 14a-na1000 (second MSG on its page) also M2 × 2 mm
- HP EliteBook 820 G2 also M2 × 2 mm
- Lenovo ThinkPad X12 Detachable Gen 1 also M2 × 2 mm
- HP Compaq nx7400 also M2 × 2 mm
- HP EliteBook 8770w also M2 × 2 mm
- HP Pavilion 4500 also M2.5 × 6 mm
Questions about Lenovo IdeaPad S340-13IML screws
- What size screw does Lenovo IdeaPad S340-13IML use?
- M1.6 × 3 mm for unspecified (qty 2); M1.6 × 4.5 mm for hinge (qty 4); M2 × 2 mm for hinge (qty 6); M2 × 2 mm for SSD (qty 1); M2 × 3.5 mm for I/O board (qty 1); M2 × 3.5 mm for battery (qty 4); M2 × 3.5 mm for heat sink (qty 5); M2 × 3.5 mm for SSD (qty 1); M2 × 3.5 mm for system board (qty 2); M2 × 3.5 mm for wireless card (qty 1); M2 × 4.5 mm for base cover (qty 10); M2.5 × 6 mm for palm rest (qty 6).
- How long are the screws in Lenovo IdeaPad S340-13IML?
- The records range from 2 to 6 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.6 screw?
- 0.35 mm (coarse), which is the standard pitch for M1.6 machine screws; a 0.2 mm fine pitch exists but is uncommon. The tap drill is 1.25 mm and the normal clearance hole is 1.8 mm.
- What screwdriver do I need for Lenovo IdeaPad S340-13IML?
- The sources do not name the drive. For M1.6, Phillips heads normally take PH00 and Torx heads T4–T5; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M1.6?
- No. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent. Use a true M1.6 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Lenovo IdeaPad S340-13IML?
- TechSpareWarehouse (our own store) lists M1.6 x 3mm, M2 x 2mm and M2.5 x 6mm, which match lengths in the records above.