Lenovo N24 screw size
M2 / M2.5 · 2 to 5.5 mm long
Our records put Lenovo N24 on M2 and M2.5 screws in lengths from 2 to 5.5 mm.
There are 12 separate fitment records for it, including camera (qty 1, silver, Phillips) (M2), I/O board (qty 3, black, Phillips) (M2) and battery (qty 5, black, Phillips) (M2), plus 9 more in the table below.
Head and drive, as the sources state them: Phillips drive.
12 of the 12 records are marked confirmed, drawn from 1 source (download.lenovo.com).
M2 means a 2 mm nominal diameter with a 0.4 mm thread pitch. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
Lenovo N24 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 2 mm | 0.4 mm | not stated | Phillips | Camera (qty 1, silver, Phillips) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Phillips | I/O board (qty 3, black, Phillips)black finish | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Phillips | Battery (qty 5, black, Phillips)black finish | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Speaker (qty 4, flat, black)black finish | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Phillips | Wireless card (qty 1, black, Phillips)black finish | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | Phillips | Hinge (qty 8, black, Phillips)black finish | Confirmed |
| M2.5 | 3 mm | 0.45 mm | not stated | Phillips | System board (qty 5, black, Phillips)black finish | Confirmed |
| M2.5 | 3 mm | 0.45 mm | not stated | Phillips | Touchpad (qty 2, black, Phillips)black finish | Confirmed |
| M2.5 | 4 mm | 0.45 mm | not stated | Phillips | Hinge (qty 2, silver, Phillips) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | Phillips | Display back cover (qty 2, black, Phillips)black finish | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | Phillips | Palm rest (qty 4, black, Phillips)black finish | Confirmed |
| M2.5 | 5.5 mm | 0.45 mm | not stated | Phillips | Base cover (qty 11, black, Phillips)black finish | Confirmed |
Fitment records and sources
Camera (qty 1, silver, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
I/O board (qty 3, black, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Battery (qty 5, black, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Speaker (qty 4, flat, black)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 1, black, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Hinge (qty 8, black, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 5, black, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Touchpad (qty 2, black, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Hinge (qty 2, silver, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display back cover (qty 2, black, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Palm rest (qty 4, black, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Base cover (qty 11, black, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). This device also uses M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2–5.5 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source names a Phillips drive. For comparison, standard M2 heads take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2 / M2.5
- M.2 SSD mounting screws (M2 x 3mm) are frequently mislabeled generically as 'M.2 screws' which can be confused with the M2 metric thread designation — they do coincide numerically here but are conceptually distinct (M.2 = card format, M2 = thread size).
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
- M2.5 and M3 look the same to the naked eye — you need calipers on the shank to tell them apart.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
M2 x 4mm Phillips Wafer Head Machine Screws Black 50-Pack Laptop SSD Repair
$4.49 each · min. 2
-
M2 x 4mm Screws for Dell Latitude 5530 SSD Type-C Bracket 10-Pack Black
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Lenovo N24, closest length match first.
- Dell Vostro 15 3578 also M2 × 2 mm
- Lenovo B40-70 also M2 × 2 mm
- Lenovo E10-30 also M2 × 3 mm
- Acer Aspire NAV50 also M2 × 3 mm
- Dell XPS M1210 also M2 × 3 mm
- Lenovo ThinkPad 380Z also M2.5 × 3 mm
- Dell Precision 3570 also M2 × 2 mm
- HP EliteBook x360 830 G5 also M2 × 2 mm
Questions about Lenovo N24 screws
- What size screw does Lenovo N24 use?
- M2 × 2 mm for camera (qty 1, silver, Phillips); M2 × 3 mm for I/O board (qty 3, black, Phillips); M2 × 3 mm for battery (qty 5, black, Phillips); M2 × 3 mm for speaker (qty 4, flat, black); M2 × 3 mm for wireless card (qty 1, black, Phillips); M2 × 4 mm for hinge (qty 8, black, Phillips); M2.5 × 3 mm for system board (qty 5, black, Phillips); M2.5 × 3 mm for touchpad (qty 2, black, Phillips); M2.5 × 4 mm for hinge (qty 2, silver, Phillips); M2.5 × 5 mm for display back cover (qty 2, black, Phillips); M2.5 × 5 mm for palm rest (qty 4, black, Phillips); M2.5 × 5.5 mm for base cover (qty 11, black, Phillips).
- How long are the screws in Lenovo N24?
- The records range from 2 to 5.5 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for Lenovo N24?
- The source lists a Phillips drive. Standard M2 heads otherwise take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Lenovo N24?
- TechSpareWarehouse (our own store) lists M2 x 2mm, M2 x 3mm and M2 x 4mm, which match lengths in the records above.