Lenovo ThinkPad Edge E420s screw size

Lenovo ThinkPad Edge E420s screw specifications

One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.

How to check the screw before you buy

1. A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
2. Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
3. Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
4. Length: for wafer (thin) head screws, measure from under the head to the tip (countersunk heads are the exception: they are measured overall).
5. The records span 2–4 mm, which means different positions take different lengths — match each hole to its own screw.
6. Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
7. Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.

Pitch gauge · Screw size finder · Torque guide

More in Laptops & PCs

The same screw also fits

Devices whose records share a thread with Lenovo ThinkPad Edge E420s, closest length match first.

• Lenovo ThinkPad 11e Chromebook 4th Gen also M2 × 3 mm
• HP Chromebook x360 14c also M2 × 2 mm
• Dell Inspiron 1100 also M2 × 3 mm
• Acer Aspire 4332 also M2 × 3 mm
• Toshiba Satellite L10 also M2 × 3 mm
• Lenovo V15 Gen 3 also M2 × 2 mm
• Framework Laptop 13 mainboard (longer fastener) also M2 × 4 mm
• HP Mini 1101 also M2 × 3 mm

Questions about Lenovo ThinkPad Edge E420s screws

What size screw does Lenovo ThinkPad Edge E420s use?

M2 × 2 mm for palm rest (qty 1, wafer, black); M2 × 3 mm for hard drive (qty 1, wafer, black); M2 × 3 mm for keyboard (qty 2, wafer, black); M2 × 3 mm for palm rest (qty 8, wafer, black); M2 × 3.5 mm for hinge (qty 4, wafer, black); M2 × 4 mm for card reader (qty 1, wafer, black); M2 × 4 mm for display (qty 2, wafer, black); M2 × 4 mm for display bezel (qty 2, wafer, black); M2 × 4 mm for fan (qty 2, wafer, black); M2 × 4 mm for hard drive (qty 4, flat, black); M2 × 4 mm for optical drive (qty 2, wafer, black); M2 × 4 mm for SSD (qty 2, wafer, black); M2 × 4 mm for system board (qty 3, wafer, black); M2 × 4 mm for wireless card (qty 2, wafer, black).

How long are the screws in Lenovo ThinkPad Edge E420s?

The records range from 2 to 4 mm depending on the position, so match each screw to its own hole.

What is the thread pitch of an M2 screw?

0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.

What screwdriver do I need for Lenovo ThinkPad Edge E420s?

The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.

Can I use an imperial screw instead of M2?

No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.

Where can I buy replacement screws for Lenovo ThinkPad Edge E420s?

TechSpareWarehouse (our own store) lists M2 x 2mm, M2 x 3mm and M2 x 4mm, which match lengths in the records above.