Lenovo ThinkPad X13 2-in-1 Gen 5 screw size

Lenovo ThinkPad X13 2-in-1 Gen 5 screw specifications

One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.

How to check the screw before you buy

1. A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
2. Diameter: across the threads an M1.6 screw measures about 1.6 mm with calipers (usually a hair under). This device also uses M2 / M2.5, so measure each screw rather than assuming they match.
3. Pitch: 0.35 mm from one thread crest to the next (28.57 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
4. Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
5. The records span 2.1–5 mm, which means different positions take different lengths — match each hole to its own screw.
6. Driver: the source does not name the drive. Standard M1.6 heads take PH00 for Phillips and T4–T5 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
7. Tightening: no device-specific torque is published in these records. The site's general figure for M1.6 is about 12-20 N·cm into metal threads and 6-10 N·cm into plastic bosses; snug it up and stop.

Pitch gauge · Screw size finder · Torque guide

More in Laptops & PCs

The same screw also fits

Devices whose records share a thread with Lenovo ThinkPad X13 2-in-1 Gen 5, closest length match first.

• HP Pavilion 14 14-ec1000 (ids 2100371663 also M2 × 2.5 mm
• Dell Inspiron 15 3582 also M2.5 × 5 mm
• Lenovo IdeaPad S500 Touch also M2.5 × 3 mm
• HP EliteBook 740 G1 also M2.5 × 5 mm
• Dell Inspiron 4000 also M2.5 × 5 mm
• Dell Pro 14 Premium PA14250 also M1.6 × 2.5 mm
• Lenovo ThinkPad S14 also M2 × 3.5 mm
• HP Pavilion 16 inch PC 16z-ag000 also M2 × 2.3 mm

Questions about Lenovo ThinkPad X13 2-in-1 Gen 5 screws

What size screw does Lenovo ThinkPad X13 2-in-1 Gen 5 use?

M1.6 × 2.1 mm for card reader (qty 4, flat, black); M1.6 × 2.1 mm for fan (qty 7, flat, black); M1.6 × 2.1 mm for system board (qty 1, flat, black); M1.6 × 2.1 mm for unspecified (qty 7, flat, black); M1.6 × 2.5 mm for card reader (qty 4, flat, black,white); M1.6 × 2.5 mm for system board (qty 1, flat, black); M1.6 × 2.6 mm for card reader (qty 4, flat, white); M2 × 2.3 mm for base cover (qty 1, flat, black); M2 × 2.5 mm for base cover (qty 1, flat, black); M2 × 2.5 mm for fan (qty 2, flat, black); M2 × 2.5 mm for system board (qty 8, flat, black); M2 × 3.5 mm for base cover (qty 1, flat, black); M2 × 4.5 mm for battery (qty 4, flat, white); M2.5 × 3 mm for keyboard (qty 6, flat, black); M2..

How long are the screws in Lenovo ThinkPad X13 2-in-1 Gen 5?

The records range from 2.1 to 5 mm depending on the position, so match each screw to its own hole.

What is the thread pitch of an M1.6 screw?

0.35 mm (coarse), which is the standard pitch for M1.6 machine screws; a 0.2 mm fine pitch exists but is uncommon. The tap drill is 1.25 mm and the normal clearance hole is 1.8 mm.

What screwdriver do I need for Lenovo ThinkPad X13 2-in-1 Gen 5?

The sources do not name the drive. For M1.6, Phillips heads normally take PH00 and Torx heads T4–T5; socket heads take a 1.5 mm hex key.

Can I use an imperial screw instead of M1.6?

No. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent. Use a true M1.6 screw so it does not cross-thread or strip the hole.

Where can I buy replacement screws for Lenovo ThinkPad X13 2-in-1 Gen 5?

TechSpareWarehouse (our own store) lists M2 x 2.5mm, M2.5 x 3mm and M2.5 x 5mm, which match lengths in the records above.