Lenovo ThinkPad X9-14 Gen 1 screw size
M1.6 / M2 / M2.5 · 2 to 4 mm long
Our records put Lenovo ThinkPad X9-14 Gen 1 on M1.6, M2 and M2.5 screws in lengths from 2 to 4 mm.
There are 5 separate fitment records for it, including unspecified (qty 6, flat, black) (M1.6), unspecified (qty 10, flat, black) (M2) and unspecified (qty 2, flat, black) (M2), plus 2 more in the table below.
5 of the 5 records are marked confirmed, drawn from 1 source (campuspoint.de).
M1.6 means a 1.6 mm nominal diameter with a 0.35 mm thread pitch. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent.
Lenovo ThinkPad X9-14 Gen 1 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.6 | 3 mm | 0.35 mm | not stated | not stated | Unspecified (qty 6, flat, black)black finish | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | Unspecified (qty 10, flat, black)black finish | Confirmed |
| M2 | 3.2 mm | 0.4 mm | not stated | not stated | Unspecified (qty 2, flat, black)black finish | Confirmed |
| M2 | 3.8 mm | 0.4 mm | not stated | not stated | Unspecified (qty 4, flat) | Confirmed |
| M2.5 | 4 mm | 0.45 mm | not stated | not stated | Unspecified (qty 6, flat) | Confirmed |
Fitment records and sources
Unspecified (qty 6, flat, black)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Unspecified (qty 10, flat, black)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 2, flat, black)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 4, flat)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 6, flat)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M1.6 screw measures about 1.6 mm with calipers (usually a hair under). This device also uses M2 / M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.35 mm from one thread crest to the next (28.57 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2–4 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M1.6 heads take PH00 for Phillips and T4–T5 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.6 is about 12-20 N·cm into metal threads and 6-10 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.6 / M2 / M2.5
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- Nylon-coated M2.5 screws (ThinkPad Edge) are thread-locking; plain replacements work loose over time.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M1.6 x 3mm Screws Compatible with Dell XPS 13 9340 Keyboard 10-Pack Black
$4.99 -
M1.6 x 3mm Screws for Dell XPS 13 9340 System Board Replacement 10-Pack Black
$4.99
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Lenovo ThinkPad X9-14 Gen 1, closest length match first.
- Dell Latitude 5540 also M2 × 2 mm
- HP ProBook 4311s also M2 × 2 mm
- HP 321 also M2 × 2 mm
- Lenovo ThinkPad X13s Gen 1 also M2 × 2 mm
- HP Pavilion DX6500 also M2.5 × 4 mm
- Lenovo N23 also M2.5 × 4 mm
- Lenovo ThinkPad X220 Tablet also M1.6 × 3 mm
- HP 350 G2 also M2 × 2 mm
Questions about Lenovo ThinkPad X9-14 Gen 1 screws
- What size screw does Lenovo ThinkPad X9-14 Gen 1 use?
- M1.6 × 3 mm for unspecified (qty 6, flat, black); M2 × 2 mm for unspecified (qty 10, flat, black); M2 × 3.2 mm for unspecified (qty 2, flat, black); M2 × 3.8 mm for unspecified (qty 4, flat); M2.5 × 4 mm for unspecified (qty 6, flat).
- How long are the screws in Lenovo ThinkPad X9-14 Gen 1?
- The records range from 2 to 4 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.6 screw?
- 0.35 mm (coarse), which is the standard pitch for M1.6 machine screws; a 0.2 mm fine pitch exists but is uncommon. The tap drill is 1.25 mm and the normal clearance hole is 1.8 mm.
- What screwdriver do I need for Lenovo ThinkPad X9-14 Gen 1?
- The sources do not name the drive. For M1.6, Phillips heads normally take PH00 and Torx heads T4–T5; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M1.6?
- No. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent. Use a true M1.6 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Lenovo ThinkPad X9-14 Gen 1?
- TechSpareWarehouse (our own store) lists M1.6 x 3mm, M2 x 2mm and M2 x 3mm, which match lengths in the records above.