Lenovo YOGA 910-13IKB Glass screw size

Lenovo YOGA 910-13IKB Glass screw specifications

One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.

How to check the screw before you buy

1. Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
2. Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
3. Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
4. Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
5. The records span 2–3.5 mm, which means different positions take different lengths — match each hole to its own screw.
6. Driver: the source names a Phillips drive. For comparison, standard M2 heads take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.
7. Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.

Pitch gauge · Screw size finder · Torque guide

More in Laptops & PCs

The same screw also fits

Devices whose records share a thread with Lenovo YOGA 910-13IKB Glass, closest length match first.

• Dell Inspiron 14 5409 also M2 × 2 mm
• HP Elite x360 830 13 inch G11 2-in-1 also M2 × 2 mm
• Lenovo Flex 4-1435 also M2 × 2 mm
• HP ZBook Studio 16 inch G11 also M2 × 3.5 mm
• HP Pavilion dv4200 PC Compaq Presario V4200 also M2 × 2 mm
• Lenovo ThinkPad T14s Gen 6 also M2 × 3.5 mm
• Lenovo ideapad 330E-15ICH also M2 × 3.5 mm
• Lenovo ThinkPad E16 Gen 4 also M2 × 2 mm

Questions about Lenovo YOGA 910-13IKB Glass screws

What size screw does Lenovo YOGA 910-13IKB Glass use?

M2 × 2 mm for speaker (qty 4, black, Phillips); M2 × 2.7 mm for I/O board (qty 4, black, Phillips); M2 × 2.7 mm for battery (qty 4, black, Phillips); M2 × 2.7 mm for display (qty 12, black, Phillips); M2 × 2.7 mm for heat sink (qty 1, black, Phillips); M2 × 2.7 mm for SSD (qty 1, black, Phillips); M2 × 2.7 mm for system board (qty 6, black, Phillips); M2 × 2.7 mm for wireless card (qty 1, black, Phillips); M2 × 3.5 mm for base cover (qty 10, silver, Torx).

How long are the screws in Lenovo YOGA 910-13IKB Glass?

The records range from 2 to 3.5 mm depending on the position, so match each screw to its own hole.

What is the thread pitch of an M2 screw?

0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.

What screwdriver do I need for Lenovo YOGA 910-13IKB Glass?

The source lists a Phillips and Torx drive. Standard M2 heads otherwise take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.

Can I use an imperial screw instead of M2?

No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.

Where can I buy replacement screws for Lenovo YOGA 910-13IKB Glass?

TechSpareWarehouse (our own store) lists M2 x 2mm and M2 x 2.5mm, which match lengths in the records above.