Lenovo YOGA C930-13IKB Glass screw size

Lenovo YOGA C930-13IKB Glass screw specifications

One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.

How to check the screw before you buy

1. A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
2. Diameter: across the threads an M1.6 screw measures about 1.6 mm with calipers (usually a hair under). This device also uses M2, so measure each screw rather than assuming they match.
3. Pitch: 0.35 mm from one thread crest to the next (28.57 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
4. Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
5. The records span 1.5–3.5 mm, which means different positions take different lengths — match each hole to its own screw.
6. Driver: the source names a Phillips drive. For comparison, standard M1.6 heads take PH00 (Phillips) or T4–T5 (Torx), or a 1.5 mm hex key.
7. Tightening: no device-specific torque is published in these records. The site's general figure for M1.6 is about 12-20 N·cm into metal threads and 6-10 N·cm into plastic bosses; snug it up and stop.

Pitch gauge · Screw size finder · Torque guide

More in Laptops & PCs

The same screw also fits

Devices whose records share a thread with Lenovo YOGA C930-13IKB Glass, closest length match first.

• Lenovo G50-70 also M2 × 3.5 mm
• Lenovo ideapad 320S-15IKB also M2 × 3.5 mm
• Lenovo ideapad 310S-11IAP also M2 × 2 mm
• HP ProBook 4545s also M2 × 2 mm
• Lenovo ideapad 120S also M2 × 2 mm
• Lenovo FLEX-14IWL also M2 × 2 mm
• HP EliteBook 840 G4 also M2 × 2 mm
• HP 14 inch 14a-na1000 (ids 32708668 also M2 × 2 mm

Questions about Lenovo YOGA C930-13IKB Glass screws

What size screw does Lenovo YOGA C930-13IKB Glass use?

M1.6 × 1.5 mm for unspecified (qty 1, black, Phillips); M1.6 × 2.6 mm for display (qty 10, black, Phillips); M2 × 2 mm for display (qty 2, black, Phillips); M2 × 2 mm for hinge (qty 6, black, Phillips); M2 × 2 mm for power button (qty 1, black, Phillips); M2 × 2 mm for speaker (qty 4, black, Phillips); M2 × 2 mm for SSD (qty 1, black, Phillips); M2 × 2 mm for touchpad (qty 4, black, Phillips); M2 × 2 mm for unspecified (qty 2, black, Phillips); M2 × 2 mm for wireless card (qty 2, black, Phillips); M2 × 2.7 mm for battery (qty 4, black, Phillips); M2 × 2.7 mm for display (qty 6, black, Torx); M2 × 2.7 mm for fan (qty 4, black, Phillips); M2 × 2.7 mm for system board (qty 14, black, Phillips);.

How long are the screws in Lenovo YOGA C930-13IKB Glass?

The records range from 1.5 to 3.5 mm depending on the position, so match each screw to its own hole.

What is the thread pitch of an M1.6 screw?

0.35 mm (coarse), which is the standard pitch for M1.6 machine screws; a 0.2 mm fine pitch exists but is uncommon. The tap drill is 1.25 mm and the normal clearance hole is 1.8 mm.

What screwdriver do I need for Lenovo YOGA C930-13IKB Glass?

The source lists a Phillips and Torx drive. Standard M1.6 heads otherwise take PH00 (Phillips) or T4–T5 (Torx), or a 1.5 mm hex key.

Can I use an imperial screw instead of M1.6?

No. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent. Use a true M1.6 screw so it does not cross-thread or strip the hole.

Where can I buy replacement screws for Lenovo YOGA C930-13IKB Glass?

TechSpareWarehouse (our own store) lists M2 x 2mm and M2 x 2.5mm, which match lengths in the records above.