Lenovo Yoga Slim 7 Ultra 14IPH11 screw size
M1.2 / M1.6 / M2 · 1.4 to 7 mm long
Lenovo Yoga Slim 7 Ultra 14IPH11 takes M1.2, M1.6 and M2 metric screws in lengths from 1.4 to 7 mm.
There are 14 separate fitment records for it, including I/O board (qty 2) (M1.2), system board (qty 4) (M1.2) and unspecified (qty 2, white) (M1.2), plus 11 more in the table below.
14 of the 14 records are marked confirmed, drawn from 1 source (download.lenovo.com).
M1.2 means a 1.2 mm nominal diameter with a 0.25 mm thread pitch. Imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute.
Lenovo Yoga Slim 7 Ultra 14IPH11 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.2 | 1.4 mm | 0.25 mm | not stated | not stated | I/O board (qty 2) | Confirmed |
| M1.2 | 1.4 mm | 0.25 mm | not stated | not stated | System board (qty 4) | Confirmed |
| M1.2 | 1.4 mm | 0.25 mm | not stated | not stated | Unspecified (qty 2, white) | Confirmed |
| M1.6 | 2.7 mm | 0.35 mm | not stated | not stated | Heat sink (qty 2) | Confirmed |
| M1.6 | 2.7 mm | 0.35 mm | not stated | not stated | Palm rest (qty 4) | Confirmed |
| M1.6 | 2.7 mm | 0.35 mm | not stated | not stated | System board (qty 11) | Confirmed |
| M1.6 | 2.7 mm | 0.35 mm | not stated | not stated | Unspecified (black)black finish | Confirmed |
| M1.6 | 3.5 mm | 0.35 mm | not stated | not stated | Base cover (qty 6) | Confirmed |
| M1.6 | 3.5 mm | 0.35 mm | not stated | not stated | Unspecified | Confirmed |
| M1.6 | 7 mm | 0.35 mm | not stated | not stated | Base cover (qty 2) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | Speaker (qty 2) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | SSD (qty 1) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | Fan (qty 4) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | Hinge (qty 6) | Confirmed |
Fitment records and sources
I/O board (qty 2)
pitch 0.25 mm · tap 0.95 mm · clearance 1.4 mm · PH000 / JIS 00 / Torx T1–T2
System board (qty 4)
pitch 0.25 mm · tap 0.95 mm · clearance 1.4 mm · PH000 / JIS 00 / Torx T1–T2
Unspecified (qty 2, white)
pitch 0.25 mm · tap 0.95 mm · clearance 1.4 mm · PH000 / JIS 00 / Torx T1–T2
Heat sink (qty 2)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Palm rest (qty 4)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
System board (qty 11)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Unspecified (black)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Base cover (qty 6)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Unspecified
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Base cover (qty 2)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Speaker (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
SSD (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Fan (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Hinge (qty 6)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M1.2 screw measures about 1.2 mm with calipers (usually a hair under). This device also uses M1.6 / M2, so measure each screw rather than assuming they match.
- Pitch: 0.25 mm from one thread crest to the next (40 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 1.4–7 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M1.2 heads take PH000 / JIS 00 for Phillips and T1–T2 for Torx; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.2 is about 5-8 N·cm into metal threads and 3-5 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.2 / M1.6 / M2
- M1.2 and M1.4 look identical in an eyeglass repair kit — the wrong one strips soft acetate or metal hinges.
- Headphone hinge screw sizes are usually quoted from screwdriver bit size, not an actual thread spec - measure before buying.
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Lenovo Yoga Slim 7 Ultra 14IPH11, closest length match first.
- HP 348 G5 (same PDF listed on both pages) also M2 × 2 mm
- Lenovo K14 G3 IMU also M2 × 2 mm
- HP 15s-fq4000 also M2 × 2 mm
- Lenovo ThinkPad X23 also M2 × 3.5 mm
- HP Victus by HP 16.1 inch Gaming 16-r0000 also M2 × 2 mm
- HP EliteBook 6 G1ah 16 inch also M2 × 2 mm
- Lenovo YOGA 900S-12ISK also M2 × 2 mm
- HP ProBook 4 G2iR 14 inch also M2 × 2 mm
Questions about Lenovo Yoga Slim 7 Ultra 14IPH11 screws
- What size screw does Lenovo Yoga Slim 7 Ultra 14IPH11 use?
- M1.2 × 1.4 mm for I/O board (qty 2); M1.2 × 1.4 mm for system board (qty 4); M1.2 × 1.4 mm for unspecified (qty 2, white); M1.6 × 2.7 mm for heat sink (qty 2); M1.6 × 2.7 mm for palm rest (qty 4); M1.6 × 2.7 mm for system board (qty 11); M1.6 × 2.7 mm for unspecified (black); M1.6 × 3.5 mm for base cover (qty 6); M1.6 × 3.5 mm for unspecified; M1.6 × 7 mm for base cover (qty 2); M2 × 2 mm for speaker (qty 2); M2 × 2 mm for SSD (qty 1); M2 × 3.5 mm for fan (qty 4); M2 × 3.5 mm for hinge (qty 6).
- How long are the screws in Lenovo Yoga Slim 7 Ultra 14IPH11?
- The records range from 1.4 to 7 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.2 screw?
- 0.25 mm (coarse), which is the standard pitch for M1.2 machine screws. The tap drill is 0.95 mm and the normal clearance hole is 1.4 mm.
- What screwdriver do I need for Lenovo Yoga Slim 7 Ultra 14IPH11?
- The sources do not name the drive. For M1.2, Phillips heads normally take PH000 / JIS 00 and Torx heads T1–T2.
- Can I use an imperial screw instead of M1.2?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute. Use a true M1.2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Lenovo Yoga Slim 7 Ultra 14IPH11?
- TechSpareWarehouse (our own store) lists M2 x 2mm, which matches the length in the records above.