LG LS70 screw size
M2 / M2.5 · 3.5 to 10 mm long
LG LS70 takes M2 and M2.5 metric screws in lengths from 3.5 to 10 mm.
There are 7 separate fitment records for it, including unspecified (qty 3) (M2), unspecified (qty 7) (M2) and unspecified (qty 4) (M2), plus 4 more in the table below.
7 of the 7 records are marked confirmed, drawn from 1 source (tim.id.au).
M2 means a 2 mm nominal diameter with a 0.4 mm thread pitch. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
LG LS70 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 10 mm | 0.4 mm | not stated | not stated | Unspecified (qty 3) | Confirmed |
| M2 | 3.5 mm | 0.4 mm | not stated | not stated | Unspecified (qty 7) | Confirmed |
| M2 | 5 mm | 0.4 mm | not stated | not stated | Unspecified (qty 4) | Confirmed |
| M2.5 | 3.5 mm | 0.45 mm | not stated | not stated | Unspecified (qty 3) | Confirmed |
| M2.5 | 4.5 mm | 0.45 mm | not stated | not stated | Unspecified (qty 6) | Confirmed |
| M2.5 | 6.5 mm | 0.45 mm | not stated | not stated | Unspecified (qty 2) | Confirmed |
| M2.5 | 8 mm | 0.45 mm | not stated | not stated | Unspecified (qty 2) | Confirmed |
Fitment records and sources
Unspecified (qty 3)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 7)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 3)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Unspecified (qty 6)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Unspecified (qty 2)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Unspecified (qty 2)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). This device also uses M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 3.5–10 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2 / M2.5
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- M2 (2.00mm, 0.4mm pitch) is NOT the same as #2-56 UNC (2.18mm) — close enough to cross-thread and strip if forced.
- M2.5 and M3 look the same to the naked eye — you need calipers on the shank to tell them apart.
- M2.5 pitch is 0.45mm vs M3's 0.5mm and M2's 0.4mm — forcing the wrong one strips plastic bosses instantly.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2 x 5mm Replacement Bottom Case Screws for Dell Inspiron 3535 Laptop 10-Pack
$4.99 -
M2 x 5mm Phillips Wafer Head Screw for Dell G16 7630 Gaming Laptop Repair - Pack of 100 Black
$7.99 -
M2.5 x 8mm Screws for Retevis RT27 Radio Belt Clip 10-Pack Black Phillips
$4.99 -
M2.5 x 8mm Screws for Raspberry Pi 5 Case and PoE HAT 10-Pack Black
$4.99 -
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
-
Dell Inspiron 15 3520 Replacement Screws Sold Individually – M2 x 3mm, M2 x 5mm, M2.5 x 5mm, M3 x 3mm Phillips Wafer Head, Black
$0.10Choose size -
Dell Latitude 5430 Replacement Screws Sold Individually – M2 x 2.5mm, M2 x 3mm, M2 x 5mm, M2.5 x 5mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with LG LS70, closest length match first.
- Lenovo S20-30 Touch also M2 × 5 mm
- MSI MS-15F4 chassis gaming laptop also M2.5 × 6.5 mm
- Lenovo G400s also M2 × 3.5 mm
- Lenovo ThinkPad W700ds also M2 × 10 mm
- HP OMEN 16 inch Gaming PC 16-ap0xxx also M2 × 3.5 mm
- Lenovo ThinkPad T61p also M2 × 3.5 mm
- Lenovo ThinkPad R60 also M2 × 10 mm
- Lenovo ThinkPad P16s Gen 4 also M2 × 3.5 mm
Questions about LG LS70 screws
- What size screw does LG LS70 use?
- M2 × 10 mm for unspecified (qty 3); M2 × 3.5 mm for unspecified (qty 7); M2 × 5 mm for unspecified (qty 4); M2.5 × 3.5 mm for unspecified (qty 3); M2.5 × 4.5 mm for unspecified (qty 6); M2.5 × 6.5 mm for unspecified (qty 2); M2.5 × 8 mm for unspecified (qty 2).
- How long are the screws in LG LS70?
- The records range from 3.5 to 10 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for LG LS70?
- The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for LG LS70?
- TechSpareWarehouse (our own store) lists M2 x 5mm and M2.5 x 8mm, which match lengths in the records above.