NewBeeDrone action camera mount kit screw size
M5 · length not stated in the sources
NewBeeDrone action camera mount kit takes M5 metric screws. None of the sources we found gives an exact length, so measure the original before you order.
It is listed for M5 mounting hardware set for action cam mounts.
This entry is marked confirmed and comes from racedayquads.com.
An M5 screw is 5 mm in diameter with a 0.8 mm pitch, tapped with a 4.2 mm drill; imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing.
NewBeeDrone action camera mount kit screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M5 | not stated | 0.8 mm | not stated | not stated | M5 mounting hardware set for action cam mounts | Confirmed |
Fitment records and sources
M5 mounting hardware set for action cam mounts
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
How to check the screw before you buy
- Do not confuse metric mounting screws with the 1/4-20 or 3/8-16 tripod threads that cameras and clamps also carry.
- Diameter: across the threads an M5 screw measures about 5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.8 mm from one thread crest to the next (12.5 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- Driver: the source does not name the drive. Standard M5 heads take PH2 for Phillips and T25 for Torx, and a 4 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M5 is about 4.0-6.0 N·m into metal threads and 1.5-2.5 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M5
- Archery sight and rest hardware is almost always imperial 10-24, not metric.
- Concept2 rowers/ergs look metric-friendly but use imperial 1/4-20 hardware throughout — M6 will NOT thread in; do not force it.
More in Cameras & Optics
1.25" eyepiece/diagonal/SCT visual back thumb screwAimpoint Comp M4 / M4s LRP & TNP mountAimpoint Micro T-1/T-2/H-1/H-2 standard mountAimpoint Micro T-1/T-2/H-1/H-2 standard mount screwAimpoint SM-2001/2007 Micro T1/T2 mountAirsoft red dot sight mounting screw set (Laylax/Quintes Sence)Airsoft/firearm red-dot sight optic mounting screws (Vortex Viper, Swampfox patterns)Alpine and touring ski bindings (Binding Freedom inserts)Arca-style quick-release plateARRI plate for Sony VENICE 1/2Artesky 340mm Vixen Dovetail BarAstromania finder scope dovetail base
Browse all 278 in Cameras & Optics →The same screw also fits
Devices whose records share a thread with NewBeeDrone action camera mount kit, closest length match first.
- GoPro Universal Car Mounts also M5
- GoPro mount thumbscrew also M5
- ISMS Picatinny scope mount rail clamp also M5
- Kayak and canoe accessory rail track also M5
- GoPro thumbscrew/nut (scope mount project) also M5
- GoPro HERO action camera mounting thumb screw also M5
- ISMS (Sweden) ISMS scope mount clamping screws (Torx T20) also M5
- ScopeStuff nylon thumbscrew kit also M5
Questions about NewBeeDrone action camera mount kit screws
- What size screw does NewBeeDrone action camera mount kit use?
- M5 for M5 mounting hardware set for action cam mounts.
- How long are the screws in NewBeeDrone action camera mount kit?
- None of the sources states a length. Remove one screw and measure it from under the head to the tip (overall for a countersunk head).
- What is the thread pitch of an M5 screw?
- 0.8 mm (coarse), which is the standard pitch for M5 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 4.2 mm and the normal clearance hole is 5.5 mm.
- What screwdriver do I need for NewBeeDrone action camera mount kit?
- The sources do not name the drive. For M5, Phillips heads normally take PH2 and Torx heads T25; socket heads take a 4 mm hex key.
- Can I use an imperial screw instead of M5?
- No. Imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing. Use a true M5 screw so it does not cross-thread or strip the hole.