Sony 150K screw size
M2 · 4 to 16 mm long
If you are replacing a screw on Sony 150K, the thread is M2 in lengths from 4 to 16 mm.
There are 3 separate fitment records for it, including keyboard (qty 3, black) (M2), keyboard (qty 4, black) (M2) and unspecified (qty 8, flat, black) (M2).
3 of the 3 records are marked confirmed, drawn from 1 source (tim.id.au).
An M2 screw is 2 mm in diameter with a 0.4 mm pitch, tapped with a 1.6 mm drill; imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
Sony 150K screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 16 mm | 0.4 mm | not stated | not stated | Keyboard (qty 3, black)black finish | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Keyboard (qty 4, black)black finish | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | not stated | Unspecified (qty 8, flat, black)black finish | Confirmed |
Fitment records and sources
Keyboard (qty 3, black)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Keyboard (qty 4, black)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 8, flat, black)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
How to check the screw before you buy
- Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 4–16 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- M2 (2.00mm, 0.4mm pitch) is NOT the same as #2-56 UNC (2.18mm) — close enough to cross-thread and strip if forced.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2 x 4mm Phillips Wafer Head Machine Screws Black 50-Pack Laptop SSD Repair
$4.49 each · min. 2
-
M2 x 4mm Screws for Dell Latitude 5530 SSD Type-C Bracket 10-Pack Black
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
-
Dell Latitude 5530 Replacement Screws Sold Individually – M2 x 3mm, M2 x 4mm, M2.5 x 5mm Phillips Wafer Head, Black
$0.10Choose size -
HP EliteBook 840 G8 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 4mm, M2.5 x 4mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Sony 150K, closest length match first.
- HP Pavilion dv4200 PC Compaq Presario V4200 also M2 × 16 mm
- Lenovo Flex14D also M2 × 4 mm
- Dell Inspiron 14 5409 also M2 × 4 mm
- HP Elite x360 830 13 inch G11 2-in-1 also M2 × 4 mm
- Toshiba Satellite 5200 also M2 × 4 mm
- HP Compaq 6720s also M2 × 4 mm
- Lenovo ThinkPad Yoga 11e Chromebook 4th Gen also M2 × 4 mm
- Lenovo ThinkPad P16v Gen 3 also M2 × 4 mm
Questions about Sony 150K screws
- What size screw does Sony 150K use?
- M2 × 16 mm for keyboard (qty 3, black); M2 × 4 mm for keyboard (qty 4, black); M2 × 4 mm for unspecified (qty 8, flat, black).
- How long are the screws in Sony 150K?
- The records range from 4 to 16 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for Sony 150K?
- The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Sony 150K?
- TechSpareWarehouse (our own store) lists M2 x 4mm, which matches the length in the records above.