How long are the screws in TBS Source One V3 / HD FPV frame?

The records range from 6 to 30 mm depending on the position, so match each screw to its own hole.

What is the thread pitch of an M3 screw?

0.5 mm (coarse), which is the standard pitch for M3 machine screws; a 0.35 mm fine pitch exists but is uncommon. The tap drill is 2.5 mm and the normal clearance hole is 3.4 mm.

What screwdriver do I need for TBS Source One V3 / HD FPV frame?

The sources do not name the drive. For M3, Phillips heads normally take PH1 and Torx heads T10; socket heads take a 2.5 mm hex key.

Can I use an imperial screw instead of M3?

No. Imperial look-alike: #5-40 (3.18 mm) or #4-40 — neither interchanges with M3. Use a true M3 screw so it does not cross-thread or strip the hole.

Where can I buy replacement screws for TBS Source One V3 / HD FPV frame?

TechSpareWarehouse (our own store) lists M3 x 6mm, M3 x 8mm and M3 x 10mm, which match lengths in the records above.

TBS Source One V3 / HD FPV frame screw size

M3 · 6 to 30 mm long

TBS Source One V3 / HD FPV frame takes M3 metric screws in lengths from 6 to 30 mm.

The record covers TBS screw set: M3x8 x16 (top/bottom plates), M3x14 x4 and M3x16 x4 (arms to centre plates), M3x6 x16 (motors), M3x30 standoffs x8.

This entry is marked confirmed and comes from testshop.team-blacksheep.com.

M3 means a 3 mm nominal diameter with a 0.5 mm thread pitch. Imperial look-alike: #5-40 (3.18 mm) or #4-40 — neither interchanges with M3.

TBS Source One V3 / HD FPV frame screw specifications

One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.

Thread	Length	Pitch	Head	Drive	Where it goes	Status
M3	6–30 mm	0.5 mm	not stated	not stated	TBS screw set: M3x8 x16 (top/bottom plates), M3x14 x4 and M3x16 x4 (arms to centre plates), M3x6 x16 (motors), M3x30 standoffs x8	Confirmed

Fitment records and sources

M36-30 mmconfirmed

TBS screw set: M3x8 x16 (top/bottom plates), M3x14 x4 and M3x16 x4 (arms to centre plates), M3x6 x16 (motors), M3x30 standoffs x8

pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10

Source

How to check the screw before you buy

Frame and motor screws must not reach the motor windings; check the length against the motor's mounting depth.
Diameter: across the threads an M3 screw measures about 3 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
Pitch: 0.5 mm from one thread crest to the next (20 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
The records span 6–30 mm, which means different positions take different lengths — match each hole to its own screw.
Driver: the source does not name the drive. Standard M3 heads take PH1 for Phillips and T10 for Torx, and a 2.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
Tightening: no device-specific torque is published in these records. The site's general figure for M3 is about 80-130 N·cm into metal threads and 35-60 N·cm into plastic bosses; snug it up and stop.

Common mix-ups with M3

On FPV motors, screw length is safety-critical: one turn too long and the screw crushes the motor windings. Measure arm + base depth, and dry-fit before powering up.
Intel's ATX and microATX specs never state a metric standoff thread; PC motherboard standoffs are usually imperial 6-32, and PC fan screws are commonly 6-32 self-tapping.

Pitch gauge · Screw size finder · Torque guide

Buy these screws at TechSpare Warehouse

In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.

M3 x 6mm Replacement Screws for XLR Audio Connectors Phillips Wafer Head 50-Pack $4.99
M3 x 6mm Phillips Wafer Head Carbon Steel Machine Screws for XLR Audio Connectors | 50-Pack (Black) $4.99
M3 x 8mm Screws for Leather Spike Attachments Guitar Straps 10-Pack $4.99
M3 x 8mm Phillips Wafer Head Screw for SLA Resin 3D Printer VAT Film - Single Replacement Black $0.10 each · min. 50
M3 x 10mm Phillips Wafer Head Screw for Sim Racing Wheel Paddle Shifter - Single Replacement Black $0.10 each · min. 50
M3 x 10mm Phillips Wafer Head Screw for RC Car/Truck Chassis Mount - Single Replacement Black $0.10 each · min. 50
M3 x 10mm Phillips Wafer Head Screw for 3D Printer Frame Assembly - Single Replacement Black $0.10 each · min. 50
M3 x 6mm Phillips Wafer Head Screw for 3D Printer Frame Assembly - Single Replacement Black $0.10 each · min. 50

More in Drones, RC & Gimbals

1/10 scale RC cars 1/8 scale RC car chassis hardware 3D-printed FPV stack mounts and spacers 5-inch brushless motor to arm Airsoft V2 / EHPA gearbox shells ALware Quad Flyer Spider 500 quadcopter kit Antique wall clock pendulum brackets Arcade marquee retainers ARRMA Senton (and similar 1/10 vehicles)ARRMA Senton/kingpin-equipped vehicles Axial Racing crawler/buggy kits Axial SCX10 III RC crawler chassis

Browse all 144 in Drones, RC & Gimbals →

The same screw also fits

Devices whose records share a thread with TBS Source One V3 / HD FPV frame, closest length match first.

Axial SCX10 III RC crawler, long links also M3 × 18 mm
ALware Quad Flyer Spider 500 quadcopter kit also M3 × 6–8 mm
PyroDrone anti-vibration FC standoffs also M3 × 7 mm
FPV flight controller stack 30.5x30.5mm also M3 × 7–16 mm
FPV drone motors (5-inch class) also M3 × 6–8 mm
RC brushless motor mounts also M3 × 8–16 mm
Waters Arc HPLC oven bracket screw also M3 × 10 mm
1/10 scale RC cars also M3 × 6–12 mm

Questions about TBS Source One V3 / HD FPV frame screws

What size screw does TBS Source One V3 / HD FPV frame use?: M3 × 6–30 mm for TBS screw set: M3x8 x16 (top/bottom plates), M3x14 x4 and M3x16 x4 (arms to centre plates), M3x6 x16 (motors), M3x30 standoffs x8.
How long are the screws in TBS Source One V3 / HD FPV frame?: The records range from 6 to 30 mm depending on the position, so match each screw to its own hole.
What is the thread pitch of an M3 screw?: 0.5 mm (coarse), which is the standard pitch for M3 machine screws; a 0.35 mm fine pitch exists but is uncommon. The tap drill is 2.5 mm and the normal clearance hole is 3.4 mm.
What screwdriver do I need for TBS Source One V3 / HD FPV frame?: The sources do not name the drive. For M3, Phillips heads normally take PH1 and Torx heads T10; socket heads take a 2.5 mm hex key.
Can I use an imperial screw instead of M3?: No. Imperial look-alike: #5-40 (3.18 mm) or #4-40 — neither interchanges with M3. Use a true M3 screw so it does not cross-thread or strip the hole.
Where can I buy replacement screws for TBS Source One V3 / HD FPV frame?: TechSpareWarehouse (our own store) lists M3 x 6mm, M3 x 8mm and M3 x 10mm, which match lengths in the records above.

Heads up: shipping delay