3030 extrusion T-nuts (heavy duty) screw size
M6 · 10 to 25 mm long
If you are replacing a screw on 3030 extrusion T-nuts (heavy duty), the thread is M6 in lengths from 10 to 25 mm.
The record covers for the 8mm slot on 3030 profile framing.
This entry is marked confirmed and comes from zivon.ca.
M6 means a 6 mm nominal diameter with a 1 mm thread pitch. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6.
3030 extrusion T-nuts (heavy duty) screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M6 | 10–25 mm | 1 mm | not stated | not stated | for the 8mm slot on 3030 profile framing | Confirmed |
Fitment records and sources
for the 8mm slot on 3030 profile framing
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- Printer and CNC builds usually publish a bill of materials; when it lists a length, follow it, since extrusion T-nuts and motor faces have fixed thread depths.
- Diameter: across the threads an M6 screw measures about 6 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 1 mm from one thread crest to the next (10 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 10–25 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M6 heads take PH3 for Phillips and T30 for Torx, and a 5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M6 is about 7-10 N·m into metal threads and 2.5-4.0 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M6
- Rack cage nuts come in M5, M6 and 10-32 and look nearly identical; M6 is most common on modern gear.
- 19-inch rack rails use three incompatible thread standards that share the same square hole: M6, 10-32 UNF and 12-24 UNC. Cage nuts for all of them look identical in a parts bin.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M6 x 16mm Black Wafer Head Rack Screws for Rittal DK 7094.100 / 7094.110 / 7094.140 19-inch Rack – 20-Pack Replacement
$8.99Choose size -
M6 x 16mm Black Wafer Head Awning & Box Screws for Thule Awning 326 / 327 / 328, Conduit Box 317 & Xpedition 820 / 821 (50333) – 8-Pack Replacement
$6.99Choose size -
M6 x 12mm Black Wafer Head TV Back-Panel Screws for Vizio VQD65R-1004, VQD70R-1001, VQM55C-1004, VQM65C-1004 – 8-Pack Replacement
$6.99Choose size -
M6 x 12mm Black Wafer Head Brake Line Screws for GOTRAX G3, G4, GMAX & GMAX Ultra – 8-Pack Replacement
$6.99Choose size
More in 3D Printing, CNC & Robotics
2020 extrusion T-nuts (light duty)2020 extrusion T-nuts (standard)2020 T-slot hammer head bolts2020/2040 extrusion end tap2040 extrusion T-nuts3030/4040 extrusion end tap3D printer & CNC enclosures3D printer hotend to X-carriageActobotics servo horn / hubArduino Mega 2560 mounting holesArduino shield stacking standoffsArduino Uno / Mega mounting holes
Browse all 149 in 3D Printing, CNC & Robotics →The same screw also fits
Devices whose records share a thread with 3030 extrusion T-nuts (heavy duty), closest length match first.
- Carbide3D Shapeoko 5 Pro CNC router also M6 × 12–25 mm
- Avid CNC Laser Kit also M6 × 16 mm
- Robotiq 2F-85 / 2F-140 gripper (Universal Robots) also M6 × 12 mm
- Carbide 3D 80mm VFD spindle mount kit also M6 × 20–25 mm
- 3030/4040 extrusion end tap also M6 × 10–20 mm
- Power-One 15kW/25kW wind interface also M6 × 16 mm
- Heavy flat-pack furniture also M6 × 25 mm
- Car license plate mounting screws also M6 × 16–20 mm
Questions about 3030 extrusion T-nuts (heavy duty) screws
- What size screw does 3030 extrusion T-nuts (heavy duty) use?
- M6 × 10–25 mm for for the 8mm slot on 3030 profile framing.
- How long are the screws in 3030 extrusion T-nuts (heavy duty)?
- The records range from 10 to 25 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M6 screw?
- 1 mm (coarse), which is the standard pitch for M6 machine screws; a 0.75 mm fine pitch exists but is uncommon. The tap drill is 5 mm and the normal clearance hole is 6.6 mm.
- What screwdriver do I need for 3030 extrusion T-nuts (heavy duty)?
- The sources do not name the drive. For M6, Phillips heads normally take PH3 and Torx heads T30; socket heads take a 5 mm hex key.
- Can I use an imperial screw instead of M6?
- No. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6. Use a true M6 screw so it does not cross-thread or strip the hole.