3D printer & CNC enclosures screw size
M4 · 8 to 20 mm long
If you are replacing a screw on 3D printer & CNC enclosures, the thread is M4 in lengths from 8 to 20 mm.
Where it is used: panel and bracket screws.
This entry is marked reported.
An M4 screw is 4 mm in diameter with a 0.7 mm pitch, tapped with a 3.3 mm drill; imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same.
3D printer & CNC enclosures screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M4 | 8–20 mm | 0.7 mm | not stated | not stated | panel and bracket screws | Reported |
Fitment records and sources
panel and bracket screws
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
How to check the screw before you buy
- Printer and CNC builds usually publish a bill of materials; when it lists a length, follow it, since extrusion T-nuts and motor faces have fixed thread depths.
- Diameter: across the threads an M4 screw measures about 4 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.7 mm from one thread crest to the next (14.29 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 8–20 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M4 heads take PH2 for Phillips and T20 for Torx, and a 3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M4 is about 2.0-3.0 N·m into metal threads and 0.8-1.4 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M4
- M4 and 6-32 UNC share a nominal diameter with different pitch — a classic cross-thread in US-market kits.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M4 x 20mm Black Wafer Head Pan Screw Screws for Honda Accord 1980-1989 & Civic 1978-1979 (93500-04020) – 10-Pack Replacement
$5.99Choose size -
M4 x 20mm Black Wafer Head Phillips Machine Screws (8mm Thin Flat Head) for Monitor VESA Brackets & PC Cases
From $5.99Choose size -
M4 x 10mm Black Wafer Head Charging Port Screws for GOTRAX G3, G4, GMAX & GMAX Ultra – 10-Pack Replacement
$5.49Choose size -
M4 x 10mm Black Wafer Head Fender Clamp Base Screws for Minoura KODACHI DYK-1R Rear Fender – 8-Pack Replacement
$5.49Choose size
More in 3D Printing, CNC & Robotics
2020 extrusion T-nuts (light duty)2020 extrusion T-nuts (standard)2020 T-slot hammer head bolts2020/2040 extrusion end tap2040 extrusion T-nuts3030 extrusion T-nuts (heavy duty)3030/4040 extrusion end tap3D printer hotend to X-carriageActobotics servo horn / hubArduino Mega 2560 mounting holesArduino shield stacking standoffsArduino Uno / Mega mounting holes
Browse all 149 in 3D Printing, CNC & Robotics →The same screw also fits
Devices whose records share a thread with 3D printer & CNC enclosures, closest length match first.
- Prusa i3 MK3S/MK4 heatbed and frame also M4 × 8–20 mm
- Heated bed leveling screws also M4 × 20 mm
- Creality K1/Ender extrusion corner brackets also M4 × 8–16 mm
- Avid CNC Laser Kit also M4 × 8–16 mm
- 3D printer hotend to X-carriage also M4 × 10–20 mm
- InMoov open-source robot also M4 × 20 mm
- Ultimaker Original heated bed / Z-stage upgrade kit also M4 × 10 mm
- Inventables X-Carve 300W 24VDC spindle kit also M4 × 10 mm
Questions about 3D printer & CNC enclosures screws
- What size screw does 3D printer & CNC enclosures use?
- M4 × 8–20 mm for panel and bracket screws.
- How long are the screws in 3D printer & CNC enclosures?
- The records range from 8 to 20 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M4 screw?
- 0.7 mm (coarse), which is the standard pitch for M4 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 3.3 mm and the normal clearance hole is 4.5 mm.
- What screwdriver do I need for 3D printer & CNC enclosures?
- The sources do not name the drive. For M4, Phillips heads normally take PH2 and Torx heads T20; socket heads take a 3 mm hex key.
- Can I use an imperial screw instead of M4?
- No. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same. Use a true M4 screw so it does not cross-thread or strip the hole.