48280AH lithium battery pack enclosure wheels screw size
M6 · 14 mm long
Our records put 48280AH lithium battery pack enclosure wheels on M6 screws, 14 mm long.
It is listed for assembly guide: mount the wheels with 16 M6 x 14 hex Phillips screws, 8 Nm.
Head and drive, as the source states them: Phillips drive.
This entry is marked confirmed and comes from akkudoktor.net.
For reference, M6 is 6 mm across the threads at 1 mm pitch. The imperial size people confuse it with: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6.
48280AH lithium battery pack enclosure wheels screw specifications
One row per fitment record. Head, drive and torque are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Torque | Where it goes | Status |
|---|---|---|---|---|---|---|---|
| M6 | 14 mm | 1 mm | not stated | Phillips | 8 Nm | Assembly guide: mount the wheels with 16 M6 x 14 hex Phillips screws, 8 Nm | Confirmed |
Fitment records and sources
Assembly guide: mount the wheels with 16 M6 x 14 hex Phillips screws, 8 Nm
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- Rack and enclosure hardware mixes metric and imperial (#8-32, #10-32, #6-32), so confirm the thread before forcing a screw.
- Diameter: across the threads an M6 screw measures about 6 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 1 mm from one thread crest to the next (10 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 14 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source names a Phillips drive. For comparison, standard M6 heads take PH3 (Phillips) or T30 (Torx), or a 5 mm hex key.
Common mix-ups with M6
- 19-inch racks are not all metric: 10-32 and 12-24 UNC are still the norm in North America, with M6 the metric/square-hole cage-nut option.
- Rack hole threads vary: 10-32 and 12-24 are still common in US racks alongside M6 - check the rail before buying.
More in Electronics, Racks & Enclosures
19-inch rack cage nut (light equipment)19-inch rack cage nut (metric square-hole rails)19-inch rack cage nut (mid size)19-inch rack cage nut and panel screw19-inch rack network and AV gear19-inch rack-mount audio/AV equipment19-inch server racks19in / 10in server rack cage nut and screw kit19in equipment rack (Kendall Howard cage nuts)19in rack cage nuts (alternate metric)19in rack cage nuts (metric)1U rack-mount PDU (American Denki)
Browse all 357 in Electronics, Racks & Enclosures →The same screw also fits
Devices whose records share a thread with 48280AH lithium battery pack enclosure wheels, closest length match first.
- Wurth Elektronik WA-SSTIE steel spacer stud also M6 × 14 mm
- 19-inch rack cage nut and panel screw also M6 × 14 mm
- Xiaomi M365 / Ninebot brake caliper also M6 × 14 mm
- Ninebot Max G30 rear fender also M6 × 14 mm
- Rittal VX VX enclosure hinge countersunk Torx screw also M6 × 14 mm
- 19-inch server racks also M6 × 14 mm
- item Roller Conveyor Aluminum Fastening Bracket D30 also M6 × 14 mm
- Industrial machinery also M6 × 14 mm
Questions about 48280AH lithium battery pack enclosure wheels screws
- What size screw does 48280AH lithium battery pack enclosure wheels use?
- M6 × 14 mm for assembly guide: mount the wheels with 16 M6 x 14 hex Phillips screws, 8 Nm.
- How long are the screws in 48280AH lithium battery pack enclosure wheels?
- The record gives 14 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M6 screw?
- 1 mm (coarse), which is the standard pitch for M6 machine screws; a 0.75 mm fine pitch exists but is uncommon. The tap drill is 5 mm and the normal clearance hole is 6.6 mm.
- What screwdriver do I need for 48280AH lithium battery pack enclosure wheels?
- The source lists a Phillips drive. Standard M6 heads otherwise take PH3 (Phillips) or T30 (Torx), or a 5 mm hex key.
- Can I use an imperial screw instead of M6?
- No. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6. Use a true M6 screw so it does not cross-thread or strip the hole.
- How tight should the M6 screw on 48280AH lithium battery pack enclosure wheels be?
- The source gives 8 Nm for assembly guide: mount the wheels with 16 M6 x 14 hex Phillips screws, 8 Nm.