Acer TravelMate 2480 screw size
M2 / M2.5 · 3 mm long
Acer TravelMate 2480 takes M2 and M2.5 metric screws, 3 mm long.
There are 2 separate fitment records for it, including memory (qty 22) (M2) and memory (qty 21) (M2.5).
2 of the 2 records are marked confirmed, drawn from 1 source (tim.id.au).
M2 means a 2 mm nominal diameter with a 0.4 mm thread pitch. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
Acer TravelMate 2480 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 3 mm | 0.4 mm | not stated | not stated | Memory (qty 22) | Confirmed |
| M2.5 | 3 mm | 0.45 mm | not stated | not stated | Memory (qty 21) | Confirmed |
Fitment records and sources
Memory (qty 22)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Memory (qty 21)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). This device also uses M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 3 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2 / M2.5
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- M2 (2.00mm, 0.4mm pitch) is NOT the same as #2-56 UNC (2.18mm) — close enough to cross-thread and strip if forced.
- M2.5 pitch is 0.45mm vs M3's 0.5mm and M2's 0.4mm — forcing the wrong one strips plastic bosses instantly.
- M2.5 and M3 look the same to the naked eye — you need calipers on the shank to tell them apart.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99 -
25x M2.5 x 3mm Phillips Screws for Acer Nitro 5 SSD M.2 WiFi Card
$5.99 -
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
M2.5 x 3mm Phillips Wafer Head Screws, Low Profile – 10-Pack Black
$4.99Choose size -
M2.5 x 3mm Black Wafer Head Screws for Lenovo ThinkPad S1 Yoga Display Replacement – 10-Pack Black
$4.99Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Acer TravelMate 2480, closest length match first.
- Lenovo ThinkPad X201s also M2 × 3 mm
- Lenovo ThinkPad E475 also M2 × 3 mm
- Dell Precision 3541 also M2 × 3 mm
- Laptop Wi-Fi card / M.2 22110 retention also M2 × 3 mm
- Dell Latitude 3410 also M2 × 3 mm
- Dell Inspiron 17 7706 2-in-1 also M2 × 3 mm
- Dell Latitude 7520 also M2 × 3 mm
- LG LW60 also M2 × 3 mm
Questions about Acer TravelMate 2480 screws
- What size screw does Acer TravelMate 2480 use?
- M2 × 3 mm for memory (qty 22); M2.5 × 3 mm for memory (qty 21).
- How long are the screws in Acer TravelMate 2480?
- The record gives 3 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for Acer TravelMate 2480?
- The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Acer TravelMate 2480?
- TechSpareWarehouse (our own store) lists M2 x 3mm and M2.5 x 3mm, which match lengths in the records above.




