Contender Planetary Mixer MXP004/MXP005 (commercial bakery mixer) electrical diagram terminal screws screw size
M4 · 10 mm long
If you are replacing a screw on Contender Planetary Mixer MXP004/MXP005 (commercial bakery mixer) electrical diagram terminal screws, the thread is M4, 10 mm long.
The record covers contender Planetary Mixer User Manual's electrical diagram section explicitly specifies M4 screws for the control panel terminal block and motor contactor connections.
This entry is marked likely and comes from ecatering.co.uk.
For reference, M4 is 4 mm across the threads at 0.7 mm pitch. The imperial size people confuse it with: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same.
Contender Planetary Mixer MXP004/MXP005 (commercial bakery mixer) electrical diagram terminal screws screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M4 | 10 mm | 0.7 mm | not stated | not stated | Contender Planetary Mixer User Manual's electrical diagram section explicitly specifies M4 screws for the control panel terminal block and motor contactor connections | Likely |
Fitment records and sources
Contender Planetary Mixer User Manual's electrical diagram section explicitly specifies M4 screws for the control panel terminal block and motor contactor connections
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
How to check the screw before you buy
- Industrial parts lists usually give the full callout (thread, length, head, grade); match all four, not just the thread.
- Diameter: across the threads an M4 screw measures about 4 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.7 mm from one thread crest to the next (14.29 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 10 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M4 heads take PH2 for Phillips and T20 for Torx, and a 3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M4 is about 2.0-3.0 N·m into metal threads and 0.8-1.4 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M4
- M4 and 6-32 UNC share a nominal diameter with different pitch — a classic cross-thread in US-market kits.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
More in Industrial & Machinery
The same screw also fits
Devices whose records share a thread with Contender Planetary Mixer MXP004/MXP005 (commercial bakery mixer) electrical diagram terminal screws, closest length match first.
- OPEX SureSort mail/parcel sorting machine electrical cabinet also M4 × 10 mm
- IBE KL125PR Spiral Mixer (commercial bakery dough mixer) electrical panel also M4 × 10 mm
- Rhea Vendors Luce Publico vending machine also M4 × 10 mm
- Pinball cabinet hardware (EU restorations) also M4 × 10 mm
- Sewing machine presser foot ankle (HQ/industrial home machines) also M4 × 10 mm
- Dell U4919DW also M4 × 10 mm
- Dell U2413 also M4 × 10 mm
- Neopost/Paper-Machines 7104 Series High-Volume Modular Inserter (mailroom sorting/inserting machine) also M4 × 10 mm
Questions about Contender Planetary Mixer MXP004/MXP005 (commercial bakery mixer) electrical diagram terminal screws screws
- What size screw does Contender Planetary Mixer MXP004/MXP005 (commercial bakery mixer) electrical diagram terminal screws use?
- M4 × 10 mm for contender Planetary Mixer User Manual's electrical diagram section explicitly specifies M4 screws for the control panel terminal block and motor contactor connections.
- How long are the screws in Contender Planetary Mixer MXP004/MXP005 (commercial bakery mixer) electrical diagram terminal screws?
- The record gives 10 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M4 screw?
- 0.7 mm (coarse), which is the standard pitch for M4 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 3.3 mm and the normal clearance hole is 4.5 mm.
- What screwdriver do I need for Contender Planetary Mixer MXP004/MXP005 (commercial bakery mixer) electrical diagram terminal screws?
- The sources do not name the drive. For M4, Phillips heads normally take PH2 and Torx heads T20; socket heads take a 3 mm hex key.
- Can I use an imperial screw instead of M4?
- No. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same. Use a true M4 screw so it does not cross-thread or strip the hole.