Rhea Vendors Luce Publico vending machine screw size
M4 / M6 · 7 to 16 mm long
If you are replacing a screw on Rhea Vendors Luce Publico vending machine, the thread is M4 and M6 in lengths from 7 to 16 mm.
There are 2 separate fitment records for it, including parts list specifies M4 nuts and M4x16 / M4x10 / M4x7 truss and hex head cabinet screws (M4) and M6 x 11 elastic hex head screws used in dispenser and cabinet hardware (M6).
Head and drive, as the sources state them: truss head.
2 of the 2 records are marked confirmed, drawn from 1 source (art-vending.ru).
M4 means a 4 mm nominal diameter with a 0.7 mm thread pitch. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same.
Rhea Vendors Luce Publico vending machine screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M4 | 7–16 mm | 0.7 mm | Truss head | not stated | Parts list specifies M4 nuts and M4x16 / M4x10 / M4x7 truss and hex head cabinet screws | Confirmed |
| M6 | 11 mm | 1 mm | not stated | not stated | M6 x 11 elastic hex head screws used in dispenser and cabinet hardware | Confirmed |
Fitment records and sources
Parts list specifies M4 nuts and M4x16 / M4x10 / M4x7 truss and hex head cabinet screws
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
M6 x 11 elastic hex head screws used in dispenser and cabinet hardware
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- Industrial parts lists usually give the full callout (thread, length, head, grade); match all four, not just the thread.
- Diameter: across the threads an M4 screw measures about 4 mm with calipers (usually a hair under). This device also uses M6, so measure each screw rather than assuming they match.
- Pitch: 0.7 mm from one thread crest to the next (14.29 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: for truss head screws, measure from under the head to the tip (countersunk heads are the exception: they are measured overall).
- The records span 7–16 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M4 heads take PH2 for Phillips and T20 for Torx, and a 3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M4 is about 2.0-3.0 N·m into metal threads and 0.8-1.4 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M4 / M6
- Robot vacuum, air purifier and baby monitor teardowns list screws by driver and length only — length is not a thread size.
- Smart doorbell and lock kits bundle metric machine screws with imperial wood screws in the same bag; the metric ones are rarely labelled.
- 19-inch rack rails use three incompatible thread standards that share the same square hole: M6, 10-32 UNF and 12-24 UNC. Cage nuts for all of them look identical in a parts bin.
- Rack cage nuts come in M5, M6 and 10-32 and look nearly identical; M6 is most common on modern gear.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M4 x 10mm Black Wafer Head Charging Port Screws for GOTRAX G3, G4, GMAX & GMAX Ultra – 10-Pack Replacement
$5.49Choose size -
M4 x 10mm Black Wafer Head Fender Clamp Base Screws for Minoura KODACHI DYK-1R Rear Fender – 8-Pack Replacement
$5.49Choose size -
M4 x 16mm Black Wafer Head Assembly Screws for xTool D1 Pro Laser Engraver – 10-Pack Replacement
$5.99Choose size -
M4 x 16mm Black Wafer Head Monitor VESA & Stand Screws for Sceptre E415B, C345B-QUN168W, C305B-FUN200W1, E345B-QU180D & U550CV – 8-Pack Replacement
$5.99Choose size
More in Industrial & Machinery
The same screw also fits
Devices whose records share a thread with Rhea Vendors Luce Publico vending machine, closest length match first.
- Pinball cabinet hardware (EU restorations) also M4 × 8–16 mm
- IBE KL125PR Spiral Mixer (commercial bakery dough mixer) electrical panel also M4 × 10 mm
- Juki MF-7923 / MF-7523 industrial machine also M4 × 8 mm
- Ryobi RY40001B 40V power head also M4 × 14 mm
- Webstaurantstore 348SM80/348SM100 Spiral Mixer (bakery) electrical/guard switch mounting also M4 × 16 mm
- Tuttnauer manual autoclaves also M4 × 8 mm
- Sewing machine presser foot ankle (HQ/industrial home machines) also M4 × 10 mm
- Pinball machine fan screw also M4 × 8 mm
Questions about Rhea Vendors Luce Publico vending machine screws
- What size screw does Rhea Vendors Luce Publico vending machine use?
- M4 × 7–16 mm for parts list specifies M4 nuts and M4x16 / M4x10 / M4x7 truss and hex head cabinet screws; M6 × 11 mm for M6 x 11 elastic hex head screws used in dispenser and cabinet hardware.
- How long are the screws in Rhea Vendors Luce Publico vending machine?
- The records range from 7 to 16 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M4 screw?
- 0.7 mm (coarse), which is the standard pitch for M4 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 3.3 mm and the normal clearance hole is 4.5 mm.
- What screwdriver do I need for Rhea Vendors Luce Publico vending machine?
- The sources do not name the drive. For M4, Phillips heads normally take PH2 and Torx heads T20; socket heads take a 3 mm hex key.
- Can I use an imperial screw instead of M4?
- No. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same. Use a true M4 screw so it does not cross-thread or strip the hole.