Dell Inspiron 13 7373 screw size
M1.2 / M1.4 / M2 / M2.5 · 1.5 to 5 mm long
Dell Inspiron 13 7373 takes M1.2, M1.4, M2 and M2.5 metric screws in lengths from 1.5 to 5 mm.
There are 13 separate fitment records for it, including keyboard (qty 6) (M1.2), keyboard (qty 27) (M1.4) and I/O board (qty 2) (M2), plus 10 more in the table below.
13 of the 13 records are marked confirmed, drawn from 1 source (dl.dell.com).
M1.2 means a 1.2 mm nominal diameter with a 0.25 mm thread pitch. Imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute.
Dell Inspiron 13 7373 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.2 | 1.5 mm | 0.25 mm | not stated | not stated | Keyboard (qty 6) | Confirmed |
| M1.4 | 2 mm | 0.3 mm | not stated | not stated | Keyboard (qty 27) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | I/O board (qty 2) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | System board (qty 2) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | not stated | Touchpad (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Battery (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | DC-in (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Fan (qty 2) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | SSD (qty 1) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | USB-C board (qty 2) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Wireless card (qty 1) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | Base cover (qty 9, captive)captive | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | Display (qty 6, flat) | Confirmed |
Fitment records and sources
Keyboard (qty 6)
pitch 0.25 mm · tap 0.95 mm · clearance 1.4 mm · PH000 / JIS 00 / Torx T1–T2
Keyboard (qty 27)
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
I/O board (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
System board (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Touchpad (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Battery (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
DC-in (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Fan (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
SSD (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
USB-C board (qty 2)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 1)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Base cover (qty 9, captive)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display (qty 6, flat)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M1.2 screw measures about 1.2 mm with calipers (usually a hair under). This device also uses M1.4 / M2 / M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.25 mm from one thread crest to the next (40 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 1.5–5 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M1.2 heads take PH000 / JIS 00 for Phillips and T1–T2 for Torx; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.2 is about 5-8 N·cm into metal threads and 3-5 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.2 / M1.4 / M2 / M2.5
- Framework lists both M1.2 x 3.0 silver and M1.6 x 3.0 black expansion-card screws; they look identical in the tray but are not interchangeable.
- Dental implant screws (M1.4/M1.6) are proprietary per system — Bredent, NeoBiotech, Nobel and Straumann are not interchangeable even at the same nominal size.
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M1.4 x 2mm Screws for Dell XPS 13 9340 Power Button Fingerprint 10-Pack Black
$4.99 -
M1.4 x 2mm Screws for Dell XPS 14 9440 Power Button – 10-Pack Black
$4.99
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Dell Inspiron 13 7373, closest length match first.
- Acer Aspire 4930G also M2 × 3 mm
- Lenovo ThinkPad 600E also M2 × 3 mm
- Lenovo ThinkPad X1 Extreme 2nd also M2 × 2 mm
- Dell Inspiron 15 3530 (without USB Type-C) also M2 × 2 mm
- HP 13-4100 through 4199) also M2 × 2 mm
- Lenovo ThinkPad X13 Gen 4 also M2.5 × 5 mm
- Lenovo ideapad 320L-14IKB also M2 × 3 mm
- Lenovo ideapad 710S-13IKB also M2 × 2 mm
Questions about Dell Inspiron 13 7373 screws
- What size screw does Dell Inspiron 13 7373 use?
- M1.2 × 1.5 mm for keyboard (qty 6); M1.4 × 2 mm for keyboard (qty 27); M2 × 2 mm for I/O board (qty 2); M2 × 2 mm for system board (qty 2); M2 × 2 mm for touchpad (qty 4); M2 × 3 mm for battery (qty 4); M2 × 3 mm for DC-in (qty 1); M2 × 3 mm for fan (qty 2); M2 × 3 mm for SSD (qty 1); M2 × 3 mm for USB-C board (qty 2); M2 × 3 mm for wireless card (qty 1); M2.5 × 5 mm for base cover (qty 9, captive); M2.5 × 5 mm for display (qty 6, flat).
- How long are the screws in Dell Inspiron 13 7373?
- The records range from 1.5 to 5 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.2 screw?
- 0.25 mm (coarse), which is the standard pitch for M1.2 machine screws. The tap drill is 0.95 mm and the normal clearance hole is 1.4 mm.
- What screwdriver do I need for Dell Inspiron 13 7373?
- The sources do not name the drive. For M1.2, Phillips heads normally take PH000 / JIS 00 and Torx heads T1–T2.
- Can I use an imperial screw instead of M1.2?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute. Use a true M1.2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Dell Inspiron 13 7373?
- TechSpareWarehouse (our own store) lists M1.4 x 2mm, M2 x 2mm and M2 x 3mm, which match lengths in the records above.