Dell Latitude D630 screw size
M2 / M2.5 · 3 to 8 mm long
Dell Latitude D630 takes M2 and M2.5 metric screws in lengths from 3 to 8 mm.
There are 9 separate fitment records for it, including card reader (qty 4) (M2), display (qty 6) (M2) and unspecified (qty 4) (M2), plus 6 more in the table below.
Head and drive, as the sources state them: shoulder screw head.
9 of the 9 records are marked confirmed, drawn from 1 source (dl.dell.com).
An M2 screw is 2 mm in diameter with a 0.4 mm pitch, tapped with a 1.6 mm drill; imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
Dell Latitude D630 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 3 mm | 0.4 mm | not stated | not stated | Card reader (qty 4) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Display (qty 6) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | not stated | Unspecified (qty 4) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | Shoulder screw | not stated | Display bezel (qty 6, shoulder) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | Fan (qty 1) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | Hinge (qty 1) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | not stated | System board (qty 4, silver) | Confirmed |
| M2.5 | 8 mm | 0.45 mm | not stated | not stated | Display (qty 2) | Confirmed |
| M2.5 | 8 mm | 0.45 mm | not stated | not stated | Palm rest (qty 7, captive)captive | Confirmed |
Fitment records and sources
Card reader (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display (qty 6)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 4)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display bezel (qty 6, shoulder)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Fan (qty 1)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Hinge (qty 1)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
System board (qty 4, silver)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display (qty 2)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Palm rest (qty 7, captive)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). This device also uses M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: for shoulder screw screws, measure from under the head to the tip (countersunk heads are the exception: they are measured overall).
- The records span 3–8 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2 / M2.5
- The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.
- M.2 SSD mounting screws (M2 x 3mm) are frequently mislabeled generically as 'M.2 screws' which can be confused with the M2 metric thread designation — they do coincide numerically here but are conceptually distinct (M.2 = card format, M2 = thread size).
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
- M2.5 pitch is 0.45mm vs M3's 0.5mm and M2's 0.4mm — forcing the wrong one strips plastic bosses instantly.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
M2.5 x 5mm Screws Compatible with Dell XPS 14 9440 Display Assembly 10-Pack
$4.99 -
M2.5 x 5mm Phillips Wafer Head Screw for Action Camera Protective Housing - Pack of 50 Black
$4.79 each · min. 2
-
M2.5 x 8mm Screws for Retevis RT27 Radio Belt Clip 10-Pack Black Phillips
$4.99 -
M2.5 x 8mm Screws for Raspberry Pi 5 Case and PoE HAT 10-Pack Black
$4.99 -
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Dell Latitude D630, closest length match first.
- Lenovo ThinkPad T560 also M2 × 3 mm
- Lenovo ThinkPad X1 Carbon 3rd Gen also M2 × 3 mm
- HP 4320t Mobile Thin Client also M2 × 3 mm
- Lenovo B5400 also M2 × 3 mm
- Lenovo Legion Y7000 2019 1050 also M2 × 3 mm
- Framework Laptop 16 (AMD Ryzen AI 300) also M2 × 3 mm
- HP EliteBook 725 G2 also M2 × 3 mm
- Dell Inspiron 15 5575 also M2 × 3 mm
Questions about Dell Latitude D630 screws
- What size screw does Dell Latitude D630 use?
- M2 × 3 mm for card reader (qty 4); M2 × 3 mm for display (qty 6); M2 × 3 mm for unspecified (qty 4); M2.5 × 5 mm for display bezel (qty 6, shoulder); M2.5 × 5 mm for fan (qty 1); M2.5 × 5 mm for hinge (qty 1); M2.5 × 5 mm for system board (qty 4, silver); M2.5 × 8 mm for display (qty 2); M2.5 × 8 mm for palm rest (qty 7, captive).
- How long are the screws in Dell Latitude D630?
- The records range from 3 to 8 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for Dell Latitude D630?
- The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Dell Latitude D630?
- TechSpareWarehouse (our own store) lists M2 x 3mm, M2.5 x 5mm and M2.5 x 8mm, which match lengths in the records above.