Framework Laptop 16 (AMD Ryzen AI 300) screw size
M1.2 / M1.4 / M1.6 / M2 / M2.5 · 1 to 3.5 mm long
Our records put Framework Laptop 16 (AMD Ryzen AI 300) on M1.2, M1.4, M1.6, M2 and M2.5 screws in lengths from 1 to 3.5 mm.
There are 17 separate fitment records for it, including fastener kit screw (official Framework fastener kit) — PH0 head, 1.0mm long (official fast (M1.2), input Connector Board and Input Module — PH0 head, 1.0mm long (official fastener guide) (M1.2) and fastener kit screw (official Framework fastener kit) — T5 head, 1.4mm long (official faste (M1.4), plus 14 more in the table below.
Head and drive, as the sources state them: Phillips PH0 and Torx T5 drives.
17 of the 17 records are marked confirmed, drawn from 1 source (ifixit.com).
An M1.2 screw is 1.2 mm in diameter with a 0.25 mm pitch, tapped with a 0.95 mm drill; imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute.
Framework Laptop 16 (AMD Ryzen AI 300) screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.2 | 1 mm | 0.25 mm | not stated | Phillips PH0 | fastener kit screw (official Framework fastener kit) — PH0 head, 1.0mm long (official fastener guide) | Confirmed |
| M1.2 | 1 mm | 0.25 mm | not stated | Phillips PH0 | Input Connector Board and Input Module — PH0 head, 1.0mm long (official fastener guide) | Confirmed |
| M1.4 | 1.4 mm | 0.3 mm | not stated | Torx T5 | fastener kit screw (official Framework fastener kit) — T5 head, 1.4mm long (official fastener guide) | Confirmed |
| M1.4 | 1.8 mm | 0.3 mm | not stated | Phillips PH0 | fastener kit screw (official Framework fastener kit) — PH0 head, 1.8mm long (official fastener guide) | Confirmed |
| M1.4 | 1.8 mm | 0.3 mm | not stated | Phillips PH0 | Fingerprint Reader and Touchpad — PH0 head, 1.8mm long (official fastener guide) | Confirmed |
| M1.4 | 1.4 mm | 0.3 mm | not stated | Torx T5 | Storage — T5 head, 1.4mm long (official fastener guide) | Confirmed |
| M1.6 | 1.5 mm | 0.35 mm | not stated | Torx T5 | fastener kit screw (official Framework fastener kit) — T5 head, 1.5mm long (official fastener guide) | Confirmed |
| M1.6 | 1.5 mm | 0.35 mm | not stated | Torx T5 | Webcam and Mainboard — T5 head, 1.5mm long (official fastener guide) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Torx T5 | fastener kit screw (official Framework fastener kit) — T5 head, 3.0mm long (official fastener guide) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | Torx T5 | fastener kit screw (official Framework fastener kit) — T5 head, 2.0mm long (official fastener guide) | Confirmed |
| M2 | 2.6 mm | 0.4 mm | not stated | Torx T5 | fastener kit screw (official Framework fastener kit) — T5 head, 2.6mm long (official fastener guide) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Torx T5 | Expansion Bay Shell — T5 head, 3.0mm long (official fastener guide) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Torx T5 | Graphics Module — T5 head, 3.0mm long (official fastener guide) | Confirmed |
| M2 | 2.6 mm | 0.4 mm | not stated | Torx T5 | Bottom Cover — T5 head, 2.6mm long (official fastener guide) | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | Torx T5 | Display — T5 head, 2.0mm long (official fastener guide) | Confirmed |
| M2.5 | 3.5 mm | 0.45 mm | not stated | Torx T5 | fastener kit screw (official Framework fastener kit) — T5 head, 3.5mm long (official fastener guide) | Confirmed |
| M2.5 | 2 mm | 0.45 mm | not stated | Torx T5 | Hinge — T5 head, 2.0mm long (official fastener guide) | Confirmed |
Fitment records and sources
fastener kit screw (official Framework fastener kit) — PH0 head, 1.0mm long (official fastener guide)
pitch 0.25 mm · tap 0.95 mm · clearance 1.4 mm · PH000 / JIS 00 / Torx T1–T2
Input Connector Board and Input Module — PH0 head, 1.0mm long (official fastener guide)
pitch 0.25 mm · tap 0.95 mm · clearance 1.4 mm · PH000 / JIS 00 / Torx T1–T2
fastener kit screw (official Framework fastener kit) — T5 head, 1.4mm long (official fastener guide)
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
fastener kit screw (official Framework fastener kit) — PH0 head, 1.8mm long (official fastener guide)
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
Fingerprint Reader and Touchpad — PH0 head, 1.8mm long (official fastener guide)
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
Storage — T5 head, 1.4mm long (official fastener guide)
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
fastener kit screw (official Framework fastener kit) — T5 head, 1.5mm long (official fastener guide)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
Webcam and Mainboard — T5 head, 1.5mm long (official fastener guide)
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
fastener kit screw (official Framework fastener kit) — T5 head, 3.0mm long (official fastener guide)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
fastener kit screw (official Framework fastener kit) — T5 head, 2.0mm long (official fastener guide)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
fastener kit screw (official Framework fastener kit) — T5 head, 2.6mm long (official fastener guide)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Expansion Bay Shell — T5 head, 3.0mm long (official fastener guide)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Graphics Module — T5 head, 3.0mm long (official fastener guide)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Bottom Cover — T5 head, 2.6mm long (official fastener guide)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display — T5 head, 2.0mm long (official fastener guide)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
fastener kit screw (official Framework fastener kit) — T5 head, 3.5mm long (official fastener guide)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Hinge — T5 head, 2.0mm long (official fastener guide)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M1.2 screw measures about 1.2 mm with calipers (usually a hair under). This device also uses M1.4 / M1.6 / M2 / M2.5, so measure each screw rather than assuming they match.
- Pitch: 0.25 mm from one thread crest to the next (40 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 1–3.5 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source names a Phillips PH0 drive. For comparison, standard M1.2 heads take PH000 / JIS 00 (Phillips) or T1–T2 (Torx).
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.2 is about 5-8 N·cm into metal threads and 3-5 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.2 / M1.4 / M1.6 / M2 / M2.5
- Framework lists both M1.2 x 3.0 silver and M1.6 x 3.0 black expansion-card screws; they look identical in the tray but are not interchangeable.
- M1.4 is THE Samsung Galaxy internal screw across S, A, M and Note lines — but lengths run 2.3mm to 4mm+ and are not interchangeable between models.
- M1.6 is the most common laptop-internal micro screw after M2 — Dell XPS keyboards specifically call out M1.6 x 1.5mm, and generic M2 substitutes strip the bracket.
- Framework 13 and 16 use five thread families (M1.2 to M2.5) with overlapping lengths; buy Framework's own fastener kit rather than generic M2 screws.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M1.4 x 2mm Screws for Dell XPS 13 9340 Power Button Fingerprint 10-Pack Black
$4.99 -
M1.4 x 2mm Screws for Dell XPS 14 9440 Power Button – 10-Pack Black
$4.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Framework Laptop 16 (AMD Ryzen AI 300), closest length match first.
- Lenovo Legion Y7000 2019 1050 also M2 × 3 mm
- Dell Inspiron 15 5575 also M2 × 3 mm
- HP EliteBook 725 G2 also M2 × 3 mm
- HP mt32 Mobile Thin Client (id 2100124813) also M2 × 2 mm
- HP 4320t Mobile Thin Client also M2 × 3 mm
- Lenovo ThinkPad X1 Carbon 3rd Gen also M2 × 3 mm
- Dell Latitude D630 also M2 × 3 mm
- Lenovo ThinkPad T560 also M2 × 3 mm
Questions about Framework Laptop 16 (AMD Ryzen AI 300) screws
- What size screw does Framework Laptop 16 (AMD Ryzen AI 300) use?
- M1.2 × 1 mm for fastener kit screw (official Framework fastener kit) — PH0 head, 1.0mm long (official fastener guide); M1.2 × 1 mm for input Connector Board and Input Module — PH0 head, 1.0mm long (official fastener guide); M1.4 × 1.4 mm for fastener kit screw (official Framework fastener kit) — T5 head, 1.4mm long (official fastener guide); M1.4 × 1.8 mm for fastener kit screw (official Framework fastener kit) — PH0 head, 1.8mm long (official fastener guide); M1.4 × 1.8 mm for fingerprint Reader and Touchpad — PH0 head, 1.8mm long (official fastener guide); M1.4 × 1.4 mm for storage — T5 head, 1.4mm long (official fastener guide); M1.6 × 1.5 mm for fastener kit screw (official Framework fas.
- How long are the screws in Framework Laptop 16 (AMD Ryzen AI 300)?
- The records range from 1 to 3.5 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.2 screw?
- 0.25 mm (coarse), which is the standard pitch for M1.2 machine screws. The tap drill is 0.95 mm and the normal clearance hole is 1.4 mm.
- What screwdriver do I need for Framework Laptop 16 (AMD Ryzen AI 300)?
- The source lists a Phillips PH0 and Torx T5 drive. Standard M1.2 heads otherwise take PH000 / JIS 00 (Phillips) or T1–T2 (Torx).
- Can I use an imperial screw instead of M1.2?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute. Use a true M1.2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Framework Laptop 16 (AMD Ryzen AI 300)?
- TechSpareWarehouse (our own store) lists M1.4 x 2mm, M2 x 3mm and M2 x 2mm, which match lengths in the records above.