Dinkle DKZ16 DIN-rail busbar terminal block screw size
M5 · length not stated in the sources
Dinkle DKZ16 DIN-rail busbar terminal block takes M5 metric screws. None of the sources we found gives an exact length, so measure the original before you order.
The record covers steel busbar mounting screw connection.
This entry is marked confirmed and comes from media.ic-find.com.
For reference, M5 is 5 mm across the threads at 0.8 mm pitch. The imperial size people confuse it with: #10-32 (4.83 mm) — the other common rack thread; check before mixing.
Dinkle DKZ16 DIN-rail busbar terminal block screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M5 | not stated | 0.8 mm | not stated | not stated | steel busbar mounting screw connection | Confirmed |
Fitment records and sources
steel busbar mounting screw connection
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
How to check the screw before you buy
- Where the manufacturer publishes a torque value, use a torque driver rather than feel.
- Diameter: across the threads an M5 screw measures about 5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.8 mm from one thread crest to the next (12.5 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- Driver: the source does not name the drive. Standard M5 heads take PH2 for Phillips and T25 for Torx, and a 4 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M5 is about 4.0-6.0 N·m into metal threads and 1.5-2.5 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M5
- Wheelchair and mobility OEM screws specify an exact standard and strength class (ISO 7045 CL4.8, ISO 4762 CL12.9). Matching only the thread size can cause a failure under load.
- M5x0.8 is the de facto universal bike thread — confirm 0.8mm pitch before threading into carbon or alloy bosses.
More in Vehicles, Marine & Mobility
ABB Terra DC Wallbox (3-phase UL)Adjustable Picatinny rail threaded insertAdult e-scootersAftermarket car stereo cageAirgun scope/rail mount replacement screwsAlpine Head UnitsAnalogis phono cartridge screw setArduino UNO / full-size Arduino boardsAudio MusiKraft cartridge mounting screw kitAudio MusiKraft cartridge/headshell mounting kitBar-end plug or bar-end shifterBerkel 330M Slicer carriage/guard fastener
Browse all 171 in Vehicles, Marine & Mobility →The same screw also fits
Devices whose records share a thread with Dinkle DKZ16 DIN-rail busbar terminal block, closest length match first.
- Xiaomi M365 / Pro stem faceplate also M5
- Suzuki V-Strom also M5
- Motorcycle windscreen also M5
- Bosch e-bike frame battery holder also M5
- Bicycle stem faceplate bolts also M5
- Tait Orca mobile radio vehicle kit (fleet trucks/buses) also M5
- Bicycle bottle cage bosses (near universal) also M5
- ABB Terra DC Wallbox (3-phase UL) also M5
Questions about Dinkle DKZ16 DIN-rail busbar terminal block screws
- What size screw does Dinkle DKZ16 DIN-rail busbar terminal block use?
- M5 for steel busbar mounting screw connection.
- How long are the screws in Dinkle DKZ16 DIN-rail busbar terminal block?
- None of the sources states a length. Remove one screw and measure it from under the head to the tip (overall for a countersunk head).
- What is the thread pitch of an M5 screw?
- 0.8 mm (coarse), which is the standard pitch for M5 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 4.2 mm and the normal clearance hole is 5.5 mm.
- What screwdriver do I need for Dinkle DKZ16 DIN-rail busbar terminal block?
- The sources do not name the drive. For M5, Phillips heads normally take PH2 and Torx heads T25; socket heads take a 4 mm hex key.
- Can I use an imperial screw instead of M5?
- No. Imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing. Use a true M5 screw so it does not cross-thread or strip the hole.