Elo EMV kit for Verifone MX915/M400, Ingenico ISC250 self-service stand mount screw size
M3 · 8 mm long
Elo EMV kit for Verifone MX915/M400, Ingenico ISC250 self-service stand mount takes M3 metric screws, 8 mm long.
Where it is used: assembly instructions Bag C: 'SCREW, M3X8, PAN-HEAD' Qty.2.
Head and drive, as the source states them: pan head.
This entry is marked confirmed and comes from docs.elotouch.com.
An M3 screw is 3 mm in diameter with a 0.5 mm pitch, tapped with a 2.5 mm drill; imperial look-alike: #5-40 (3.18 mm) or #4-40 — neither interchanges with M3.
Elo EMV kit for Verifone MX915/M400, Ingenico ISC250 self-service stand mount screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M3 | 8 mm | 0.5 mm | Pan head | not stated | Assembly instructions Bag C: 'SCREW, M3X8, PAN-HEAD' Qty.2 | Confirmed |
Fitment records and sources
Assembly instructions Bag C: 'SCREW, M3X8, PAN-HEAD' Qty.2
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
How to check the screw before you buy
- Check whether the mount uses a VESA pattern or a vendor bracket before buying screws.
- Diameter: across the threads an M3 screw measures about 3 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.5 mm from one thread crest to the next (20 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: for pan head screws, measure from under the head to the tip (countersunk heads are the exception: they are measured overall).
- The record states 8 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M3 heads take PH1 for Phillips and T10 for Torx, and a 2.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M3 is about 80-130 N·cm into metal threads and 35-60 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M3
- Pond/aquarium equipment manuals aimed at consumers rarely specify exact thread pitch or length for internal fasteners, since these are considered non-user-serviceable; distributor-level assembly/service manuals (e.g., Maytronics internal documents) are a better source than end-user guides.
- M3 (3.0mm, 0.5mm pitch) is not #6-32 UNC (~3.5mm) — they look identical and cross-thread, the single most common PC-building mistake.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M3 x 8mm Screws for Leather Spike Attachments Guitar Straps 10-Pack
$4.99 -
M3 x 8mm Phillips Wafer Head Screw for SLA Resin 3D Printer VAT Film - Single Replacement Black
$0.10 each · min. 50
-
M3 x 8mm Phillips Flat Head Countersunk Machine Screws Zinc Silver 100-Pack for RC & 3D Printers
$9.99 -
M3 x 8mm Phillips Flat Head Countersunk Machine Screws Zinc Silver 10-Pack for RC & 3D Printers
$4.99
More in Printers, POS & Office
Arca-Swiss / GoPro DIY adaptersBixolon SRP-B300II POS receipt printerBrother DCP-8110D laser printerBrother HL-2170W laser printerBrother MFC-8950DW laser printerCoin validator / hopper front plateCoin-door / vending coin mech holder thumb screwCOSEL power supply terminal blockDiebold Nixdorf ATM (PN 49221808000F-26)Diebold Nixdorf DN100 ATMDiebold Nixdorf DN100 nylon screwDiebold Opteva ATM cassette screw
Browse all 58 in Printers, POS & Office →The same screw also fits
Devices whose records share a thread with Elo EMV kit for Verifone MX915/M400, Ingenico ISC250 self-service stand mount, closest length match first.
- HP Color LaserJet 8500 2000-sheet input unit also M3 × 8 mm
- Lexmark T620 laser printer also M3 × 8 mm
- Arca-Swiss / GoPro DIY adapters also M3 × 8 mm
- Verifone P400 PIN pad front mounting plate screw also M3 × 8 mm
- Elo self-service kiosk stand, strap screws also M3 × 8 mm
- Diebold Nixdorf DN100 ATM also M3 × 8 mm
- Elo countertop self-service stand screw also M3 × 8 mm
- Elo floor-mount self-service stand screw also M3 × 8 mm
Questions about Elo EMV kit for Verifone MX915/M400, Ingenico ISC250 self-service stand mount screws
- What size screw does Elo EMV kit for Verifone MX915/M400, Ingenico ISC250 self-service stand mount use?
- M3 × 8 mm for assembly instructions Bag C: 'SCREW, M3X8, PAN-HEAD' Qty.2.
- How long are the screws in Elo EMV kit for Verifone MX915/M400, Ingenico ISC250 self-service stand mount?
- The record gives 8 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M3 screw?
- 0.5 mm (coarse), which is the standard pitch for M3 machine screws; a 0.35 mm fine pitch exists but is uncommon. The tap drill is 2.5 mm and the normal clearance hole is 3.4 mm.
- What screwdriver do I need for Elo EMV kit for Verifone MX915/M400, Ingenico ISC250 self-service stand mount?
- The sources do not name the drive. For M3, Phillips heads normally take PH1 and Torx heads T10; socket heads take a 2.5 mm hex key.
- Can I use an imperial screw instead of M3?
- No. Imperial look-alike: #5-40 (3.18 mm) or #4-40 — neither interchanges with M3. Use a true M3 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Elo EMV kit for Verifone MX915/M400, Ingenico ISC250 self-service stand mount?
- TechSpareWarehouse (our own store) lists M3 x 8mm, which matches the length in the records above.