Framework Laptop 13 fingerprint reader bracket / expansion card bracket screw size
M1.4 · 3.5 mm long
Our records put Framework Laptop 13 fingerprint reader bracket / expansion card bracket on M1.4 screws, 3.5 mm long.
Where it is used: M1.4 x 3.5mm T5 screws, 3.0mm head.
This entry is marked confirmed and comes from guides.frame.work.
For reference, M1.4 is 1.4 mm across the threads at 0.3 mm pitch. The imperial size people confuse it with: #0-80 UNF (1.52 mm) — close in diameter, different pitch, do not mix.
Framework Laptop 13 fingerprint reader bracket / expansion card bracket screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.4 | 3.5 mm | 0.3 mm | not stated | not stated | M1.4 x 3.5mm T5 screws, 3.0mm head | Confirmed |
Fitment records and sources
M1.4 x 3.5mm T5 screws, 3.0mm head
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
How to check the screw before you buy
- A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
- Diameter: across the threads an M1.4 screw measures about 1.4 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.3 mm from one thread crest to the next (33.33 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 3.5 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M1.4 heads take PH000 / PH00 for Phillips and T2–T3 for Torx, and a 1.3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.4 is about 8-12 N·cm into metal threads and 4-7 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.4
- M1.4 is THE Samsung Galaxy internal screw across S, A, M and Note lines — but lengths run 2.3mm to 4mm+ and are not interchangeable between models.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with Framework Laptop 13 fingerprint reader bracket / expansion card bracket, closest length match first.
- Framework Laptop 13 fingerprint reader bracket also M1.4 × 3.5 mm
- Dell Pro Max 16 Premium MA16250 also M1.4 × 3.5 mm
- Framework Laptop 13 fingerprint bracket / expansion card screw also M1.4 × 3.5 mm
- Eyewire/optical and precision-instrument screws (representative of hearing aid / camera size class) also M1.4 × 3.5 mm
- Eyeglass/spectacle hinge screws also M1.4 × 3.5 mm
- Miniature precision instrument screws (NBK) also M1.4 × 3.5 mm
- Miniature plastic machine screw (RENY) marketed for micro-precision assemblies including hearing-aid-scale hardware also M1.4 × 3.5 mm
- Fairphone 4 internal screws also M1.4 × 3.5 mm
Questions about Framework Laptop 13 fingerprint reader bracket / expansion card bracket screws
- What size screw does Framework Laptop 13 fingerprint reader bracket / expansion card bracket use?
- M1.4 × 3.5 mm for M1.4 x 3.5mm T5 screws, 3.0mm head.
- How long are the screws in Framework Laptop 13 fingerprint reader bracket / expansion card bracket?
- The record gives 3.5 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M1.4 screw?
- 0.3 mm (coarse), which is the standard pitch for M1.4 machine screws. The tap drill is 1.1 mm and the normal clearance hole is 1.6 mm.
- What screwdriver do I need for Framework Laptop 13 fingerprint reader bracket / expansion card bracket?
- The sources do not name the drive. For M1.4, Phillips heads normally take PH000 / PH00 and Torx heads T2–T3; socket heads take a 1.3 mm hex key.
- Can I use an imperial screw instead of M1.4?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) — close in diameter, different pitch, do not mix. Use a true M1.4 screw so it does not cross-thread or strip the hole.