HP Pavilion dv2000 Entertainment screw size
M2 / M2.5 / M3 · 2 to 13 mm long
The screws used on HP Pavilion dv2000 Entertainment are M2, M2.5 and M3 in lengths from 2 to 13 mm.
There are 42 separate fitment records for it, including fan (qty 4, captive, silver, Phillips) (M2), fan (qty 4, captive, Phillips) (M2) and touchpad (qty 1, silver, Phillips) (M2), plus 39 more in the table below.
Head and drive, as the sources state them: Phillips drive.
42 of the 42 records are marked confirmed, drawn from 1 source (h10032.www1.hp.com).
An M2 screw is 2 mm in diameter with a 0.4 mm pitch, tapped with a 1.6 mm drill; imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
HP Pavilion dv2000 Entertainment screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 11 mm | 0.4 mm | not stated | Phillips | Fan (qty 4, captive, silver, Phillips)captive | Confirmed |
| M2 | 13 mm | 0.4 mm | not stated | Phillips | Fan (qty 4, captive, Phillips)captive | Confirmed |
| M2 | 2 mm | 0.4 mm | not stated | Phillips | Touchpad (qty 1, silver, Phillips) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Phillips | Camera (qty 2, black, Phillips)black finish | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Phillips | Display (qty 1, Phillips) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Phillips | Optical drive (qty 2, silver, Phillips) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Phillips | Palm rest (qty 2, Phillips) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Phillips | Touchpad (qty 5, Phillips) | Confirmed |
| M2 | 3 mm | 0.4 mm | not stated | Phillips | Wireless card (qty 2, Phillips) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | Phillips | Palm rest (qty 3, Phillips) | Confirmed |
| M2 | 4 mm | 0.4 mm | not stated | Phillips | Unspecified (qty 1, black, Phillips)black finish | Confirmed |
| M2 | 5 mm | 0.4 mm | not stated | Phillips | Hard drive (qty 2, captive, black, Phillips)black finish, captive | Confirmed |
| M2 | 5 mm | 0.4 mm | not stated | Phillips | Memory (qty 2, captive, Phillips)captive | Confirmed |
| M2 | 5 mm | 0.4 mm | not stated | Phillips | Palm rest (qty 3, black, Phillips)black finish | Confirmed |
| M2 | 5 mm | 0.4 mm | not stated | Phillips | Wireless card (qty 1, captive, Phillips)captive | Confirmed |
| M2 | 6 mm | 0.4 mm | not stated | Phillips | Card reader (qty 4, Phillips) | Confirmed |
| M2 | 6 mm | 0.4 mm | not stated | Phillips | Unspecified (qty 1, Phillips) | Confirmed |
| M2 | 6 mm | 0.4 mm | not stated | Phillips | Wireless card (qty 2, black, Phillips)black finish | Confirmed |
| M2.5 | 4 mm | 0.45 mm | not stated | Phillips | I/O board (qty 1, Phillips) | Confirmed |
| M2.5 | 4 mm | 0.45 mm | not stated | Phillips | Camera (qty 1, Phillips) | Confirmed |
| M2.5 | 4 mm | 0.45 mm | not stated | Phillips | Hard drive (qty 2, black, Phillips)black finish | Confirmed |
| M2.5 | 4 mm | 0.45 mm | not stated | Phillips | Palm rest (qty 3, Phillips) | Confirmed |
| M2.5 | 4 mm | 0.45 mm | not stated | Phillips | Speaker (qty 2, Phillips) | Confirmed |
| M2.5 | 4 mm | 0.45 mm | not stated | Phillips | Unspecified (qty 2, Phillips) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | Phillips | I/O board (qty 2, Phillips) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | Phillips | Chassis/frame (qty 1, Phillips) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | Phillips | Display (qty 2, black, Phillips)black finish | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | Phillips | Display bezel (qty 4, Phillips) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | Phillips | Hard drive (qty 2, black, Phillips)black finish | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | Phillips | Palm rest (qty 2, silver, Phillips) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | Phillips | System board (qty 2, Phillips) | Confirmed |
| M2.5 | 5 mm | 0.45 mm | not stated | Phillips | Unspecified (qty 4, silver, Phillips) | Confirmed |
| M2.5 | 7 mm | 0.45 mm | not stated | Phillips | Display (qty 2, black, Phillips)black finish | Confirmed |
| M2.5 | 7 mm | 0.45 mm | not stated | Phillips | Hinge (qty 2, Phillips) | Confirmed |
| M2.5 | 7 mm | 0.45 mm | not stated | Phillips | Keyboard (qty 3, black, Phillips)black finish | Confirmed |
| M2.5 | 7 mm | 0.45 mm | not stated | Phillips | Optical drive (qty 1, Phillips) | Confirmed |
| M2.5 | 9 mm | 0.45 mm | not stated | Phillips | Display (qty 1, Phillips) | Confirmed |
| M2.5 | 9 mm | 0.45 mm | not stated | Phillips | Display bezel (qty 2, Phillips) | Confirmed |
| M2.5 | 9 mm | 0.45 mm | not stated | Phillips | Optical drive (qty 1, black, Phillips)black finish | Confirmed |
| M2.5 | 9 mm | 0.45 mm | not stated | Phillips | Palm rest (qty 7, Phillips) | Confirmed |
| M2.5 | 9 mm | 0.45 mm | not stated | Phillips | Unspecified (qty 3, silver, Phillips) | Confirmed |
| M3 | 4 mm | 0.5 mm | not stated | Phillips | Hard drive (qty 4, silver, Phillips) | Confirmed |
Fitment records and sources
Fan (qty 4, captive, silver, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Fan (qty 4, captive, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Touchpad (qty 1, silver, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Camera (qty 2, black, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Display (qty 1, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Optical drive (qty 2, silver, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Palm rest (qty 2, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Touchpad (qty 5, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 2, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Palm rest (qty 3, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 1, black, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Hard drive (qty 2, captive, black, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Memory (qty 2, captive, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Palm rest (qty 3, black, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 1, captive, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Card reader (qty 4, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Unspecified (qty 1, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
Wireless card (qty 2, black, Phillips)
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
I/O board (qty 1, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Camera (qty 1, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Hard drive (qty 2, black, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Palm rest (qty 3, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Speaker (qty 2, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Unspecified (qty 2, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
I/O board (qty 2, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Chassis/frame (qty 1, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display (qty 2, black, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display bezel (qty 4, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Hard drive (qty 2, black, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Palm rest (qty 2, silver, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
System board (qty 2, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Unspecified (qty 4, silver, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display (qty 2, black, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Hinge (qty 2, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Keyboard (qty 3, black, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Optical drive (qty 1, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display (qty 1, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Display bezel (qty 2, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Optical drive (qty 1, black, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Palm rest (qty 7, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Unspecified (qty 3, silver, Phillips)
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
Hard drive (qty 4, silver, Phillips)
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
How to check the screw before you buy
- Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). This device also uses M2.5 / M3, so measure each screw rather than assuming they match.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 2–13 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source names a Phillips drive. For comparison, standard M2 heads take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2 / M2.5 / M3
- M.2 SSD mounting screws (M2 x 3mm) are frequently mislabeled generically as 'M.2 screws' which can be confused with the M2 metric thread designation — they do coincide numerically here but are conceptually distinct (M.2 = card format, M2 = thread size).
- M2.5 and M3 look the same to the naked eye — you need calipers on the shank to tell them apart.
- Camera and tripod mounting threads themselves are imperial 1/4in-20 or 3/8in-16 — the metric M2-M4 screws in rig kits are only for the accessory hardware, not the tripod mount.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
10x M2 x 2mm Phillips Screws for HP EliteBook 840 G6 846 G6 SSD WiFi
$4.99 -
M2 x 2mm Phillips Flat Head Screw for HP EliteBook 840/846 G6 Laptop Repair - Pack of 100 Black
$7.99
-
M2 x 3mm Screws for Dell XPS 13 9340 Base Cover SSD Shield 10-Pack Black
$4.99 -
10x M2 x 3mm Phillips Screws for Lenovo ThinkPad X131e Chromebook WiFi SSD
$4.99
-
M2 x 4mm Phillips Wafer Head Machine Screws Black 50-Pack Laptop SSD Repair
$4.49 each · min. 2
-
M2 x 4mm Screws for Dell Latitude 5530 SSD Type-C Bracket 10-Pack Black
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Laptops & PCs
The same screw also fits
Devices whose records share a thread with HP Pavilion dv2000 Entertainment, closest length match first.
- HP Mini 110 also M2 × 3 mm
- HP Compaq N180 also M2.5 × 4 mm
- Lenovo ThinkPad 570 also M2.5 × 9 mm
- Lenovo ThinkPad 14.1WS also M2 × 3 mm
- Lenovo ThinkPad T440 also M2 × 2 mm
- Lenovo G585 also M2 × 2 mm
- HP EliteBook 8460w also M2 × 3 mm
- HP ZBook Power 15.6 inch G10 also M2 × 2 mm
Questions about HP Pavilion dv2000 Entertainment screws
- What size screw does HP Pavilion dv2000 Entertainment use?
- M2 × 11 mm for fan (qty 4, captive, silver, Phillips); M2 × 13 mm for fan (qty 4, captive, Phillips); M2 × 2 mm for touchpad (qty 1, silver, Phillips); M2 × 3 mm for camera (qty 2, black, Phillips); M2 × 3 mm for display (qty 1, Phillips); M2 × 3 mm for optical drive (qty 2, silver, Phillips); M2 × 3 mm for palm rest (qty 2, Phillips); M2 × 3 mm for touchpad (qty 5, Phillips); M2 × 3 mm for wireless card (qty 2, Phillips); M2 × 4 mm for palm rest (qty 3, Phillips); M2 × 4 mm for unspecified (qty 1, black, Phillips); M2 × 5 mm for hard drive (qty 2, captive, black, Phillips); M2 × 5 mm for memory (qty 2, captive, Phillips); M2 × 5 mm for palm rest (qty 3, black, Phillips); M2 × 5 mm for wirel.
- How long are the screws in HP Pavilion dv2000 Entertainment?
- The records range from 2 to 13 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for HP Pavilion dv2000 Entertainment?
- The source lists a Phillips drive. Standard M2 heads otherwise take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for HP Pavilion dv2000 Entertainment?
- TechSpareWarehouse (our own store) lists M2 x 2mm, M2 x 3mm and M2 x 4mm, which match lengths in the records above.