IPETRONIK M-SENS2 sensor module mounting bracket screw size
M2.5 · 6 mm long
IPETRONIK M-SENS2 sensor module mounting bracket takes M2.5 metric screws, 6 mm long.
The record covers official datasheet specifies 'Countersunk screw M2.5 x 6' to attach the sensor module to its mounting bracket.
Head and drive, as the source states them: flat / countersunk head.
This entry is marked confirmed and comes from ipetronik.com.
M2.5 means a 2.5 mm nominal diameter with a 0.45 mm thread pitch. Imperial look-alike: #3-48 / #4-40 (2.51 / 2.84 mm) — #4-40 is the common US stand-in and it will NOT thread in.
IPETRONIK M-SENS2 sensor module mounting bracket screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2.5 | 6 mm | 0.45 mm | Flat / countersunk | not stated | Official datasheet specifies 'Countersunk screw M2.5 x 6' to attach the sensor module to its mounting bracket | Confirmed |
Fitment records and sources
Official datasheet specifies 'Countersunk screw M2.5 x 6' to attach the sensor module to its mounting bracket
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- Rack and enclosure hardware mixes metric and imperial (#8-32, #10-32, #6-32), so confirm the thread before forcing a screw.
- Diameter: across the threads an M2.5 screw measures about 2.5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.45 mm from one thread crest to the next (22.22 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: the source describes a countersunk (flat) head, and those are measured overall, from the top of the head to the tip.
- The record states 6 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M2.5 heads take PH1 for Phillips and T8 for Torx, and a 2 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2.5 is about 45-70 N·cm into metal threads and 20-35 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2.5
- M2.5 pitch is 0.45mm vs M3's 0.5mm and M2's 0.4mm — forcing the wrong one strips plastic bosses instantly.
- M2.5 and M3 look the same to the naked eye — you need calipers on the shank to tell them apart.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2.5 x 6mm Laptop Motherboard Replacement Screws Wafer Head 10-Pack Black
$4.99 -
10x M2.5 x 6mm Phillips Screws for Lenovo ThinkPad X131e Chromebook LCD Hinge
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
-
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Electronics, Racks & Enclosures
19-inch rack cage nut (light equipment)19-inch rack cage nut (metric square-hole rails)19-inch rack cage nut (mid size)19-inch rack cage nut and panel screw19-inch rack network and AV gear19-inch rack-mount audio/AV equipment19-inch server racks19in / 10in server rack cage nut and screw kit19in equipment rack (Kendall Howard cage nuts)19in rack cage nuts (alternate metric)19in rack cage nuts (metric)1U rack-mount PDU (American Denki)
Browse all 357 in Electronics, Racks & Enclosures →The same screw also fits
Devices whose records share a thread with IPETRONIK M-SENS2 sensor module mounting bracket, closest length match first.
- Wurth Elektronik WA-SPAIE plastic spacer stud also M2.5 × 6 mm
- Lenovo IdeaPad also M2.5 × 6 mm
- Eurorack rails (older Doepfer variant) also M2.5 × 6 mm
- HP Pavilion also M2.5 × 6 mm
- PW-Sat2 CubeSat secondary structure and panels also M2.5 × 6 mm
- ASUS Chromebox 4 (CN66) also M2.5 × 6 mm
- Eurorack module-to-rail mounting screws (Vector/SynthRacks rails) also M2.5 × 6 mm
- Wurth Elektronik WA-SSTIE steel spacer stud also M2.5 × 6 mm
Questions about IPETRONIK M-SENS2 sensor module mounting bracket screws
- What size screw does IPETRONIK M-SENS2 sensor module mounting bracket use?
- M2.5 × 6 mm for official datasheet specifies 'Countersunk screw M2.5 x 6' to attach the sensor module to its mounting bracket.
- How long are the screws in IPETRONIK M-SENS2 sensor module mounting bracket?
- The record gives 6 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M2.5 screw?
- 0.45 mm (coarse), which is the standard pitch for M2.5 machine screws; a 0.35 mm fine pitch exists but is uncommon. The tap drill is 2.05 mm and the normal clearance hole is 2.9 mm.
- What screwdriver do I need for IPETRONIK M-SENS2 sensor module mounting bracket?
- The sources do not name the drive. For M2.5, Phillips heads normally take PH1 and Torx heads T8; socket heads take a 2 mm hex key.
- Can I use an imperial screw instead of M2.5?
- No. Imperial look-alike: #3-48 / #4-40 (2.51 / 2.84 mm) — #4-40 is the common US stand-in and it will NOT thread in. Use a true M2.5 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for IPETRONIK M-SENS2 sensor module mounting bracket?
- TechSpareWarehouse (our own store) lists M2.5 x 6mm, which matches the length in the records above.